Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1928796members
1242619discussions

Community Activity

ISIS L1-L2 database

Hi Experts,Basic question regarding the ISIS process. If I have a default config of ISIS between simple two IOS-XR routers:In this case both level-1-2 will form neighbor relationship.RP/0/RP0/CPU0:test1#sh run router isisrouter isis ISIS-COREnet 49.0...

WLC 5508 licenses

I have a WLC with 11 registered access points I tried to integrate a new equipment, but I see that I already have my 37 licenses in use. Can you guide me and let me know what this is due to?there is a way to release licenses from the WEB portal or...

angelalmaras_0-1713897847230.png angelalmaras_1-1713898066080.png angelalmaras_2-1713898103303.png

Resolved! ISE Failures - MAB instead of 802.1x

Hello,   I've been struggling with an issue in our ISE deployment for months. Basically, we are trying to restrict wired network access for computers by looking for 802.1x and then authorizing if the CA issuer for the machine cert is our internal CA....

adam85491 by Level 1
  • 21607 Views
  • 16 replies
  • 0 Helpful votes

Stop in progress template provisioning

Hello everyone.  I'm very new to DNAC or Catalyst Center.  I've setup a project with a template to add a simple configuration to switches.  It currently has been in progress for 10 days and hasn't made a change to a switch yet.  I'd like to cancel th...

Gricel_0-1713897966739.png
Gricel by Level 1
  • 2 Views
  • 0 replies
  • 0 Helpful votes

Interface Vlan administrativamente inativa

Acabei de criar uma vlan, atribuí-la a uma porta em nosso 6509, atribuí à vlan um endereço IP e quando eu disparo o comando, show int vlan 31 ele diz que a vlan está administrativamente inativa. Não consigo descobrir o que está acontecendo aqui? emit...

ftoprakw by Level 1
  • 6 Views
  • 0 replies
  • 0 Helpful votes

ITU-T Y.1731 on cisco 9200/9300 switches

Hi, I am working on a RFP where one of the specs says " the switch should support IEEE802.3ah ethernet link OAM and IEEE 802.1ag/ITU-T Y.1731" this is the only point which i am not able to find a reference in cisco documents, though we have a cisco 9...

unknown IPs in FTD outbound logs

I am managing FTD-1120s with FMCv both running v7.2.1 software.  In my ACP I have a GEO rule to block all outbound traffic to China, Russia, and I few other "hotspots".   When I search for events that match this rule, most of the traffic is from inte...

tato386 by Level 6
  • 149 Views
  • 5 replies
  • 1 Helpful votes

Max number of licenses available for Cisco ISE

I'm speaking of Essentials/Advantage/Premier. We use on-prem SSM.is there way to know how many licenses Cisco ISE gets from the binding to a virtual account on Cisco SSM?The only piece of information is the consumed ones, like knowing how many you ar...

CBS350 Setup guidance

Hello,I have an ISP router/modem, along with assignable public IP addresses for use. Leaving default VLAN1 alone (mgmt), I created VLAN10 (192.168.0.0/24) and VLAN20 (172.16.3.0/24) on the CBS350.ISP router "internal" ip 172.16.2.1/24On CBS350 port G...