abbas.ali@nth.com

Member Since: Dec 09, 2010

English
abbas.ali@nth.com's Activity on Cisco Support Community
Currently displaying 50 results

abbas.ali@nth.com has created Nexus 7009 dropping packets

1 year 4 months ago
I have a customer running Nexus 7009 running NX-OS 6.0.(4) and having some...

abbas.ali@nth.com has created Cisco Switch

1 year 5 months ago
I was checking the specs of Cisco 3750G-48 port switch stated that it does 38.7...

abbas.ali@nth.com has commented on ACL Support

1 year 6 months ago
Wislon,Thanks!  It was extremly helpful.

abbas.ali@nth.com has created ACL Support

1 year 6 months ago
Does anyone know how many ACL/TCAM resources are supported by WS-X6K-SUP2-2GE?...

abbas.ali@nth.com has created Private Ethernet Circuit

1 year 8 months ago
I have a private Ethernet Circuit between my home office and colo and wanted to...

abbas.ali@nth.com has created Link Cost OSPF

1 year 10 months ago
OSPF calculates cost for link based on bandwidth such as10/100/1000.  If I were...

abbas.ali@nth.com has created Cisco UCS Requirements

2 years 1 month ago
Does UCS (Servers and Storage) have to have Nexus infrastructure or it can also...

abbas.ali@nth.com has created Two ISP Links

2 years 1 month ago
I have a customer who recently replaced their (2) Cisco 2600 routers configured...

abbas.ali@nth.com has created Jumbo Frames on 1GbE iSCIS

2 years 2 months ago
I have been doing some reserach on the Internet and there were mix  responses...

abbas.ali@nth.com has created EOL Line Cards

2 years 2 months ago
I have Cisco Catalyst 6513s, 6509s non-E chassis and I beleive that all Cisco...

abbas.ali@nth.com has commented on Bridging over WAN

2 years 4 months ago
Reza,Totally agreed that this is not the common design.  I am trying this in...

abbas.ali@nth.com has commented on Bridging over WAN

2 years 4 months ago
Thanks Reza,But the whole idea behind this setup is to make both ends of...

abbas.ali@nth.com has created Bridging over WAN

2 years 4 months ago
Please see the example below.  The only question how to manage the routers ...

abbas.ali@nth.com has created Host Route

2 years 4 months ago
Hello,I have two (2) Cisco 3640 connected over a Serial/T1 Line with the...

abbas.ali@nth.com has created WAN Assessment

2 years 9 months ago
I have a 10-Node MPLS Network with Cisco 2800/2600 routers.  I am currently not...

abbas.ali@nth.com has commented on LACP between different speed ports

2 years 10 months ago
Hello

abbas.ali@nth.com has created LACP between different speed ports

2 years 10 months ago
In Cisco Catalyst switches, Is LACP doable between 1Gb and 10Gb ports.  In...

abbas.ali@nth.com has created ISCSI Traffic

2 years 10 months ago
I have the following supervisor and Line Card Modules:Supervisor:  WS-X4013+  ...

abbas.ali@nth.com has commented on LACP with 3750

2 years 10 months ago
So with only single 3750G, I can take 8 physical ports in an LACPif I don't...

abbas.ali@nth.com has commented on LACP with 3750

2 years 10 months ago
So with only single 3750G, I can take 8 physical ports in an LACPif I don't...

abbas.ali@nth.com has created LACP with 3750

2 years 10 months ago
I have a Cisco 3750G-48PS Running IOS 12.2(40) and was wondering how many...

abbas.ali@nth.com has created Cisco Nexus 1010 Virtual Appliance

2 years 10 months ago
I am new to Cisco Nexus-OS and was wondering how many hours will be needed to...

abbas.ali@nth.com has created DAI Configuration

2 years 11 months ago
Can someone point me to step-by-step configuration guide of how to enable DAI...

abbas.ali@nth.com has created uPRF Question!

2 years 11 months ago
I have been recommended to enable  Unicast Reverse Path Forwarding (uPRF) and...

abbas.ali@nth.com has commented on 10Gb Satellite Link

2 years 12 months ago
They are using L3 Provider  for the Wave 10Gb link.  We did some ping test such...

abbas.ali@nth.com has commented on 10Gb Satellite Link

2 years 12 months ago
They are using L3 Provider  for the Wave 10Gb link.  We did some ping test such...

abbas.ali@nth.com has created Dynamic ARP Inspection (DAI)

2 years 12 months ago
Can someone point me to step-by-step configuration guide of how to enable DAI...

abbas.ali@nth.com has created (uRPF)

2 years 12 months ago
I have been recommended to enable Unicast Reverse Path Forwarding (uPRF) and...

abbas.ali@nth.com has commented on 10Gb Satellite Link

2 years 12 months ago
The Link Latency is 30ms and the method for transferring the data is TCP.

abbas.ali@nth.com has commented on 10Gb Satellite Link

2 years 12 months ago
The Link Latency is 30ms and the method for transferring the data is TCP.

abbas.ali@nth.com has created 10Gb Satellite Link

3 years 1 day ago
We have a customer how has a 10Gb  Sat link between the HQ and the DR site.  On...

abbas.ali@nth.com has created Backup issue over WAN Link

3 years 2 days ago
We have a customer how has a 10Gb Sat link between the HQ and the DR site. ...

abbas.ali@nth.com has created HP Servers NIC Teaming with Cisco Nexus 2000/5000

3 years 2 weeks ago
I have number of HP switches that will be connected to Cisco Nexus 2000/5000...

abbas.ali@nth.com has created HP DAC Copper Cable with Cisco 4900M

3 years 2 weeks ago
We have HP C7000/VC-Flex 10 Module  that I would like to connect to our Netapps...

abbas.ali@nth.com has created DAC cable between HP Flex-10 and Cisco 4900M

3 years 2 weeks ago
We have HP C7000/VC-Flex 10 Module that I would like to connect to our Netapps...

abbas.ali@nth.com has commented on Cisco IOS Latest Stable Version

3 years 3 weeks ago
Hello Dominic.I don't see my current IOS listed under safe harbor release.  I...

abbas.ali@nth.com has commented on Cisco IOS Latest Stable Version

3 years 3 weeks ago
Hello Dominic.I don't see my current IOS listed under safe harbor release.  I...

abbas.ali@nth.com has created Cisco IOS Latest Stable Version

3 years 3 weeks ago
I have Cisco 6513 with sup720 running  s72033-adventerprisek9_wan-mz.122-18....

abbas.ali@nth.com has created Default features in 6500 series switches

3 years 3 weeks ago
Hello,some of the features of 6500 are enabled by default and woudn't appear in...

abbas.ali@nth.com has created Server Farm Switches VS directly connected to Module

3 years 4 weeks ago
I know there is no right or wrong answer, but I am just curious the best way to...

abbas.ali@nth.com has commented on Connectivity Problem or Packet Loss with WS-X6548-GE-TX and WS-X6148-GE-TX Modules used in a Server Farm

3 years 4 weeks ago
Thanks!  This is one of our customers and am helping with new module.  Thanks...

abbas.ali@nth.com has commented on Connectivity Problem or Packet Loss with WS-X6548-GE-TX and WS-X6148-GE-TX Modules used in a Server Farm

3 years 4 weeks ago
Thanks!  This is one of our customers and am helping with new module.  Thanks...

abbas.ali@nth.com has created Connectivity Problem or Packet Loss with WS-X6548-GE-TX and WS-X6148-GE-TX Modules used in a Server Farm

3 years 4 weeks ago
I am running those modules in my Cisco 6500 chassis and having lot of...

abbas.ali@nth.com has commented on Rate Limit and Traffic Shaping

3 years 4 weeks ago
Thanks Naidu!  Two questions,  The sample config you sent is related to 2851...

abbas.ali@nth.com has commented on Rate Limit and Traffic Shaping

3 years 4 weeks ago
Thanks Naidu!  Two questions,  The sample config you sent is related to 2851...

abbas.ali@nth.com has created Rate Limit and Traffic Shaping

3 years 4 weeks ago
I am looking for step-by-step configuration on how to enable rate-limit and...

abbas.ali@nth.com has created Moving LACP ports to another module

3 years 1 month ago
I have a Cisco 6513 switches connected to HP VC Flex 10 Module.  The (2) 10Gb...

abbas.ali@nth.com has created Can't get Phones to Work

3 years 1 month ago
I have a customer with 15 users  who are using third party "One IP Telephone...

abbas.ali@nth.com has created Virtual Connect Flex-10 with Cisco 6513 Switches

3 years 1 month ago
Hello,I have the following configuration and I suspect that there is a loop,...

abbas.ali@nth.com has created Cisco 6513 Switches with HP Flex 10 Modules

3 years 1 month ago
Hello,I have the following configuration and I suspect that there is a loop,...

Bio












abbas.ali@nth.com's Stats

Points0
Discussion started 56
Answers marked as Correct 0
Endorsed 0
Content Rated 15