abukuru95

Member Since: Sep 02, 2009

English
abukuru95 commented on EAP Chaining not working with Cisco NAM, ISE 2.0 and Windows 10 in AAA, Identity and NAC 3 weeks ago

The below has worked for me. https://support.microsoft.com/en-us/kb/2743127

abukuru95 commented on ISE Portal Builder Firefox Plugin not available in AAA, Identity and NAC 1 month ago

Hi Supportlan, Thanks for your help on this !

abukuru95 commented on Nexus Blade Center Switch not sending LACP BPDUs in Server Networking 1 year ago

Hi Michael, the setup has always been working. it actually abrupted all over a sudden on two...

abukuru95 commented on Netflow ATM Interfaces in WAN, Routing and Switching 2 years ago

Issue solved by applying the "ip route-cache cef" command on the ATM0 interface

abukuru95 commented on ATM interface issues in WAN, Routing and Switching 3 years ago

Well, what puzzles me is why this is happening all over a sudden on different devices.I thought...

abukuru95 commented on aaa authorization and show logging command in AAA, Identity and NAC 3 years ago

thanks for the tip !I had more of a configuration problem.I placed show logging and all other show...

abukuru95 commented on aaa authorization and show logging command in AAA, Identity and NAC 3 years ago

Hello all,Thanks for your response but it is unfortunately not the solution.I read a few documents...

abukuru95 commented on lacp suspend-individual command in LAN, Switching and Routing 3 years ago

thanks for your response guys

abukuru95 commented on how to show calling ID while using single number reach in IP Telephony 3 years ago

Hello, It was more a ISP provider issue. the ISP was not displaying the Caller ID on outgoing calls...

abukuru95 commented on adjust authentication timeout WLC 2504 in Getting Started with Wireless 3 years ago

thanks for your response.

abukuru95 commented on Wireshark capture on access port displays different vlan traffic in Server Networking 3 years ago

Thanks for you detailed explanation !

abukuru95 commented on adjust authentication timeout WLC 2504 in Getting Started with Wireless 3 years ago

Hello Scott,thanks for your feedback. as i can see the mac filtering option is on a global basis...

abukuru95 commented on Tacacs authentication issue WLC 7.3 in Getting Started with Wireless 3 years ago

Hello jkatyal.adding a custom attribute role1 with Mandatory and ALL did the trick https://...

abukuru95 commented on Tacacs authentication issue WLC 7.3 in Getting Started with Wireless 3 years ago

thanks to all for your input.i did a debug on the WLC and i receive the following message when i...

abukuru95 commented on WLC not sending AP up/down traps in Getting Started with Wireless 3 years ago

Thanks to you all.i actually found out that the traps get sent out correctly to the SNMP Manager...

abukuru95 commented on WLC not sending AP up/down traps in Getting Started with Wireless 3 years ago

Thnaks Amjad,I will do the test and let you know. i surely will not forget to rate if it helps me...

abukuru95 commented on WLC not sending AP up/down traps in Getting Started with Wireless 3 years ago

hello Guys and thanks to you all for your response.I enabled an SNMP debug on the WLC and i see...

abukuru95 commented on WLC not sending AP up/down traps in Getting Started with Wireless 3 years ago

thanks for your response Yahya, The WLC is correctly set to send traps when the AP goes down which...

abukuru95 commented on restore cucm in IP Telephony 3 years ago

Hello leosalcie, Can you please elaborate ? you mean that i cannot export for example devices to a...

abukuru95 commented on restore cucm in IP Telephony 3 years ago

in case i want to reconfigure my publisher from the configuration i have on my subscriber, what...

abukuru95 commented on restore cucm in IP Telephony 3 years ago

Thanks, will see if a fresh configuration will be worth a try !

abukuru95 commented on cucm restore in IP Telephony 3 years ago

thanks for the help Harmit !

abukuru95 commented on vg 224 constantly downloading configuration in IP Telephony 4 years ago

thanks for your response. the double question was an error !i know it is important to keep the...

abukuru95 commented on change the IP address of ACS in AAA, Identity and NAC 4 years ago

Tarik, Thanks for the complementary information

abukuru95 commented on change the IP address of ACS in AAA, Identity and NAC 4 years ago

Hi Tarik, You mean the IP address to hostname mapping in DNS?thanks

abukuru95 commented on change the IP address of ACS in AAA, Identity and NAC 4 years ago

Thanks to you all for your help.

abukuru95 commented on Tx pause frames on nexus 5548 in Server Networking 4 years ago

thanks for your remark

abukuru95 commented on ACS authorization in AAA, Identity and NAC 4 years ago

Hi Mauricio,i actually just did what you are sending highlighted in red. i added the command set...

abukuru95 commented on ACS 5.3 not accessing the internal DB in AAA, Identity and NAC 4 years ago

i figured it out.i had created a sequence name AD to INTERNAL DB, but i was not using it in the...

abukuru95 commented on using AD with ACS 5.3 in AAA, Identity and NAC 4 years ago

Hello jkatyal,I figured it out. actually, the problem is i had not configured a rule to associate...

abukuru95 commented on using AD with ACS 5.3 in AAA, Identity and NAC 4 years ago

thanks maldehne and jkatyal. i actually went through the proposed link but it much applies to...

abukuru95 commented on Read only Access ACS 5.3 in AAA, Identity and NAC 4 years ago

Thanks for the response jkatyal

abukuru95 commented on failure to apply patch to ACS 5.0.3 in AAA, Identity and NAC 4 years ago

Hi JKatyal,found it, i was actually specifying the wrong folder location since the ftp user i...

abukuru95 commented on failure to apply patch to ACS 5.0.3 in AAA, Identity and NAC 4 years ago

thanks jkatyal, how can i know which drive is in us? i still cannot find where to specify this. I...

abukuru95 commented on 6509 switch blade shows power down in LAN, Switching and Routing 4 years ago

thanks for your help !

abukuru95 commented on 6509 switch blade shows power down in LAN, Switching and Routing 4 years ago

Hello all and thanks for you helpful post.@leolaohoo, the output is below. when the slot is placed...

abukuru95 commented on E20 cannot downgrade in IP Telephony 4 years ago

i got this info through different threads on the cisco support forum.

abukuru95 commented on where are reason codes defined in Contact Center 4 years ago

hello Guys, thanks to all for your help

abukuru95 commented on ipccx agent without skills still recieving calls in Contact Center 4 years ago

hello all,the problem got actually solved when i did a reset on the phones. i guess after removing...

abukuru95 commented on ipccx agent without skills still recieving calls in Contact Center 4 years ago

hello Anchoudh, thanks for your fast response.the select ressource is not routing directly to this...

abukuru95 commented on cisco unity connection backup fails in IP Telephony 4 years ago

Thanks for the help Chris.

abukuru95 commented on cisco unity connection backup fails in IP Telephony 4 years ago

hello Chris,I am using freeFTPD.thanks

abukuru95 commented on IPAD NOT CONNECTING TO AP 1142 in Other Wireless - Mobility Subjects 4 years ago

Scott, it is WPA2-PSK and i am using TKIP which i think is the dafault for WPA2?thanks for the help

abukuru95 commented on IPAD NOT CONNECTING TO AP 1142 in Other Wireless - Mobility Subjects 4 years ago

I am using WPA-PSK and TKIP

abukuru95 commented on IPAD NOT CONNECTING TO AP 1142 in Other Wireless - Mobility Subjects 4 years ago

Hello Stephenhere it is;!version 12.4no service padservice timestamps debug datetime msec...

abukuru95 commented on IPAD NOT CONNECTING TO AP 1142 in Other Wireless - Mobility Subjects 4 years ago

hello blakerone,it is an ipad2 with ios 5. i have two SSID's.one for guests open authentication...

abukuru95 commented on IPAD NOT CONNECTING TO AP 1142 in Other Wireless - Mobility Subjects 4 years ago

hello blakerone,it is an ipad2 with ios 5. i have two SSID's.one for guests open authentication...

abukuru95 commented on how to show calling ID while using single number reach in IP Telephony 4 years ago

Hi Nick, the issue is with outgoing calls. according to the provider, there is no restriction.

Bio












abukuru95's Stats

Points65
Discussion started 77
Answers marked as Correct 4
Endorsed 0
Content Rated 59