ADAM CRISP

Member Since: Jul 14, 2010

English
ADAM CRISP's Activity on Cisco Support Community
Currently displaying 50 results

ADAM CRISP has commented on SIP phone registering on SIP trunk

3 weeks 4 hours ago
Sure. When you have a Directory entry, sip phone-dn. E-ephone-Dan or pots...

ADAM CRISP has commented on SIP phone registering on SIP trunk

3 weeks 1 day ago
try: voice register dn  1no-reg /Adam

ADAM CRISP has commented on Transfering calls with a phone behind a CUBE.

10 months 3 weeks ago
Does softswitch A support sip refer?

ADAM CRISP has commented on Transfering calls with a phone behind a CUBE.

10 months 3 weeks ago
Does softswitch A support sip refer?

ADAM CRISP has created PAP 2 malformed 180 ringing causing problems

10 months 3 weeks ago
Hello, We've become aware that the old PAP2 has a malformed 180...

ADAM CRISP has commented on Calls from SIP Trunk to ISDN

1 year 9 months ago
Briliant. I just added AS5300 into the description to make searching a bit...

ADAM CRISP has commented on Calls from SIP Trunk to ISDN

1 year 9 months ago
Here's some notes for doing this on our network in the UK,http://www.voip.co.uk...

ADAM CRISP has commented on cca xml export for SIP Trunk service providers, request or schema.

1 year 11 months ago
Cisco - anybody there?

ADAM CRISP has commented on CUBE as SBC to Office 365

1 year 11 months ago
Hi Alan,The call is failing since the CUBE can't provide Secure RTP. The...

ADAM CRISP has created cca xml export for SIP Trunk service providers, request or schema.

1 year 11 months ago
HiPlease can I have the complete xml schema for SIP trunks so I can create a...

ADAM CRISP has commented on Cube and SIP trunks- Static and pops/clicks on call

1 year 11 months ago
Hi,I'm glad to hear that you're almost fixed.Here's a Cisco white paper on some...

ADAM CRISP has commented on Cube and SIP trunks- Static and pops/clicks on call

1 year 12 months ago
OK can't help then. I wondered whether you had a G729a/b mismatch. I've seen (...

ADAM CRISP has commented on Cube and SIP trunks- Static and pops/clicks on call

1 year 12 months ago
Hi,  Are you using G729 ?Adam

ADAM CRISP has commented on CME SIP trunk with sccp ephones and SRTP

2 years 3 weeks ago
Hi,I looked at this type of issue a few years ago when we started offering TLS/...

ADAM CRISP has commented on Outgoing Calls Drop after 20 secs.

2 years 3 months ago
The Cisco isn't processing the IP office's ACK's, possibly because of parsing...

ADAM CRISP has commented on SIP trunk inbound calls.

2 years 3 months ago
Hello,Have a quick read of http://www.voip.co.uk/ciscoccatoolsecurity/This...

ADAM CRISP has commented on CME SIP Trunk Config debug?

2 years 3 months ago
Yes,The Service Provider challenges your Register message:Received:SIP/2.0 401...

ADAM CRISP has commented on CME SIP Trunk Config debug?

2 years 4 months ago
Hi Peter,the line: registrar dns:did.voip.les.net expires 3600means that the...

ADAM CRISP has commented on SPA3102 Simple Configuration Help

2 years 4 months ago
Hi Eric,You need to do some research on "dial-plans"check out http://homekb....

ADAM CRISP has commented on Install SSL certificate on UC560

2 years 5 months ago
Hi,Here's a method of installing a cert using IOS CLI.My method creates a trust...

ADAM CRISP has created Secure Calling for remote phones on BE3K

2 years 5 months ago
Hi,Are there plans for the BE3K to support handset/jabber call encryption to...

ADAM CRISP has commented on SPA112 TLS SRTP Support

2 years 5 months ago
OK.I recommend getting the ATA working with SIP/UDP first. You then know all...

ADAM CRISP has commented on SPA112 TLS SRTP Support

2 years 5 months ago
Hi Matt,I have TLS/SRTP working OK to our networkWhat are you connecting your...

ADAM CRISP has commented on UC540 - SIP Trunk YX Wireless

2 years 6 months ago
Hi Silva,You might want to try upgrading your version of CCA. The missing voice...

ADAM CRISP has created ASA5512-X power on after power fail

2 years 6 months ago
Hi,I have x2 ASA5512-X in a failover pair.I'm testing power on following power...

ADAM CRISP has commented on USING ISDN E1 PRI FOR DATA ONLY

2 years 6 months ago
Hi, This is classic ISDN dial and involves configuring a dialler watch list.I...

ADAM CRISP has commented on Residential SIP provider - England / UK

2 years 6 months ago
Hi Tony,Whizz and email over to sales@voip.co.uk referencing this thread and we...

ADAM CRISP has commented on CUCME - SIP phone calls can't match incoming phone number

2 years 6 months ago
This is called the Request URIINVITE sip:test@192.168.1.1:5060 SIP/2.0and this...

ADAM CRISP has commented on Feedback on the BE3000

2 years 6 months ago
Hi SanjayIt's great to see your responseOne thing though - you say: "We will...

ADAM CRISP has commented on Feedback on the BE3000

2 years 6 months ago
Hi James,With respect to point 1 above - the 6 second delay on redial. Are you...

ADAM CRISP has commented on Cucme direct to SIP gateway connection doesnt work

2 years 7 months ago
OK. Good - was going to say that the SIP Service Provider should be helping you...

ADAM CRISP has commented on Cucme direct to SIP gateway connection doesnt work

2 years 7 months ago
Did you resolve this issue ?

ADAM CRISP has commented on Cisco BE 3000 power

2 years 7 months ago
This is a BE3K we have in the UK. The unit has a sticker on the bottom saying...

ADAM CRISP has commented on voice-class sip not binding to correct interfaces

2 years 8 months ago
Can you post a config ?please include interfaces + access lists on interfaces...

ADAM CRISP has commented on voice-class sip not binding to correct interfaces

2 years 8 months ago
Brandon,Are calls placed to +17032539080 matched by dial-peer 30002?Adam

ADAM CRISP has commented on SIP Trunk Inbound calling problem

2 years 8 months ago
Hi Andy,Access 2 is used to match your internet subnets, so if a call arrives...

ADAM CRISP has commented on SIP Trunk Inbound calling problem

2 years 8 months ago
Hi Andy,Please read http://www.voip.co.uk/ciscoccatoolsecurity/  and then check...

ADAM CRISP has commented on CCA support for DNS SRV records and other SIP trunk issues

2 years 9 months ago
Cisco - please can you respond ?thanks

ADAM CRISP has commented on UC540 and incoming sip calls failing

2 years 9 months ago
Yes on CLI. No on CCA - I have no idea why they haven't fixed this, been an...

ADAM CRISP has created CCA support for DNS SRV records and other SIP trunk issues

2 years 9 months ago
Hello.Please can I raise the following?1. Why doesn't CCA support DNS SRV ?...

ADAM CRISP has commented on High time SPA 3102 supports TLS and SDP

2 years 9 months ago
double check step 3 here: http://www.voip.co.uk/cisco-spa300500-telephones/I...

ADAM CRISP has commented on UC560 T1E1 with Direct TCP SIP

2 years 9 months ago
Hi Alex,We need to find our how far the call is getting. It might be that the...

ADAM CRISP has commented on UC560 T1E1 with Direct TCP SIP

2 years 10 months ago
Hi,You have two approaches.Option AUse CCA to configure the unit from scratch....

ADAM CRISP has commented on CME Phone REGISTER via Internet (404 Not Found)

2 years 10 months ago
Hi,Have you a voice source-group configured at all ?Adam

ADAM CRISP has commented on PSTN Cable

2 years 11 months ago
Oh that's annoying. Glad you got it working.

ADAM CRISP has commented on PSTN Cable

2 years 11 months ago
Oh that's annoying. Glad you got it working.

ADAM CRISP has commented on PSTN Cable

2 years 11 months ago
Try maplins. They've got lots of telephone stuff like that.

ADAM CRISP has commented on PSTN Cable

2 years 11 months ago
Try maplins. They've got lots of telephone stuff like that.

ADAM CRISP has commented on dial-peer season target question - regarding SRV records

3 years 2 days ago
Yes Greg. SRV is the default - if you set the dialpeer to use DNS, SRV will be...

ADAM CRISP has commented on dial-peer season target question - regarding SRV records

3 years 2 days ago
Yes Greg. SRV is the default - if you set the dialpeer to use DNS, SRV will be...

Bio

CCIE # 11225

VoIP.co.uk is a VoIP service provider operating mainly in the UK

All the normal numbering services + SIP trunks for all Cisco UC systems including UnityCM, CME and UC5XX. We love Cisco's CUBE. Our IN platform includes Contact Centre load balancing systems and simple call divert.
Recent additions to our platform include a highly secure segment supporting ONLY SIP/TLS and SRTP meaning that customers can only get this working if they're properly configured and encrypted. This was intended for Credit card merchants requiring secure PSTN termination but is proving to be in demand from everybody.








  • Community Spotlight Award

    Small Business July 2012









ADAM CRISP's Stats

Points262
Discussion started 29
Answers marked as Correct 37
Endorsed 0
Content Rated 6
Website: