aleopoldie

Member Since: Apr 01, 2014

User Badges:

English
aleopoldie commented on WLC 5520 HA Setup Proble in Other Wireless - Mobility Subjects 1 month ago

Hello Alois, Yes you need the RP in order to build SSO. And it has to be Layer 2 between the 2 RPs...

aleopoldie commented on image path on portal in Getting Started with Wireless 2 months ago

Hello, You can only run lightweight or Mobility express with 1832 model, not autonomous. If you...

aleopoldie commented on Need client connected information in Getting Started with Wireless 2 months ago

Hello Viskrish, If you're running with a WLC, you can check that in MONITOR...

aleopoldie commented on Anchor load balancing with different priorities in Getting Started with Wireless 2 months ago

Are you sure ? Because I implemented both solution, and round robin is only when you have the same...

aleopoldie commented on Wireless Autonomous AP in Other Wireless - Mobility Subjects 2 months ago

Hello Ashok, If you try to disable the SSID from the interface dot11radio 1, the SSID "wireless-...

aleopoldie commented on Using both Radius and WPA-PSK in Security and Network Management 2 months ago

Hello r.wingens, You cannot configure WPA-PSK and 802.1X in the same time. Why do your customer...

aleopoldie commented on Wireless Autonomous AP in Other Wireless - Mobility Subjects 2 months ago

Hello S.ashok, This is how SSIDs are working on an autonomous AP. First, you create your SSID :...

aleopoldie commented on Cisco WLC can not redirect to web auth in Other Wireless - Mobility Subjects 2 months ago

Hello, Can you please share your ACL configuration ? Thank you, Alex-

aleopoldie commented on Cisco WLC can not redirect to web auth in Other Wireless - Mobility Subjects 2 months ago

Hello, Did you configure the Web Auth type as external ?  Alex-

aleopoldie commented on WLC 5508 failover/fallback in Wireless IP Voice and Video 2 months ago

Agree with Steven. With AP Fallback they should go back to the primary when this one is up Alex-

aleopoldie commented on HOW TO upgrade mobility express controller in Other Wireless - Mobility Subjects 2 months ago

Hi l.buschi, You need to unzip the .zip file you downloaded. You will get images like ap1g1, ap1g2...

aleopoldie commented on Wlan accesspoint dtls problem in Other Wireless - Mobility Subjects 2 months ago

Hello, Looks like you have to generate a DTLS certificate through the license product portal. You...

aleopoldie commented on Wireless Access Point Maximum Users in Other Wireless - Mobility Subjects 2 months ago

What do they mean by 128 for client link ?

aleopoldie commented on Upgrading from WCS 7.0 to Prime 3.1 in Getting Started with Wireless 2 months ago

Ok thank you Scott.

aleopoldie commented on Implementing VoIP on a Flexconnect solution in Wireless IP Voice and Video 2 months ago

Hello Benoit, I read on the following document that roaming with local authentication can have...

aleopoldie commented on Implementing VoIP on a Flexconnect solution in Wireless IP Voice and Video 3 months ago

Thank you for this detailed answer Benoit ! And your client traffic, including voice is going back...

aleopoldie commented on Cisco Wireless Lan for Multi-Tenant Solution in Other Wireless - Mobility Subjects 3 months ago

For me, Cisco WLC's are not really made for that. But perhaps I'm wrong.

aleopoldie commented on Wireless Client on Limited Access (RADIUS NAC state: DHCP_REQD) in Getting Started with Wireless 3 months ago

And what's the policy state of the clients who get the issue ? Can you try to set DHCP proxy to...

aleopoldie commented on Cisco Wireless Lan for Multi-Tenant Solution in Other Wireless - Mobility Subjects 3 months ago

What do you mean by multi-tenant ? Like a WLC in a datacenter, providing Wi-Fi for many customers...

aleopoldie commented on Wireless Client on Limited Access (RADIUS NAC state: DHCP_REQD) in Getting Started with Wireless 3 months ago

Hello Ken Lee, Can you give more details about your WLAN configuration ? Which security type are...

aleopoldie commented on Changes doing the one SSID but other SSID users also getting disconnected in Getting Started with Wireless 3 months ago

This is not expected for sure. What changes did you make on your SSID ? AL

aleopoldie commented on Cisco Controller 2504i SSID in Other Wireless - Mobility Subjects 3 months ago

You have to ensure you are configuring the good WLAN Security when adding the adding the WLAN on...

aleopoldie commented on Cisco Controller 2504i SSID in Other Wireless - Mobility Subjects 3 months ago

Then your SSID is working, right ?

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 3 months ago

No that means your WLAN is activated. First run the command "config wlan disable <WLAN ID>"...

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 3 months ago

Strange indeed... I think when using mobility express AP's, the DHCP should be configured on the...

aleopoldie commented on Aironet AP default password in Getting Started with Wireless 3 months ago

Alright, then just reset them to factory config and they will have the default password "Cisco"...

aleopoldie commented on Aironet AP default password in Getting Started with Wireless 3 months ago

It should be Cisco. Are you sure it is a factory AP ? AL

aleopoldie commented on Aironet AP default password in Getting Started with Wireless 3 months ago

Did you try Cisco/Cisco as username/password ? -AL

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 3 months ago

Strange ... It should join the WLC. Can you verify that you have a DHCP scope configure for your...

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 3 months ago

Can you run the command "show version" on the AP over console ? -AL

aleopoldie commented on Wireless Issue in Other Wireless - Mobility Subjects 3 months ago

Hello, This is a correct configuration. If you follow these instructions you shouldn't need an...

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 3 months ago

Hello Robert, That looks ok. Are you sure your AP is still on the WLC ? That might be a cause why...

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 3 months ago

Hello Robert, You have to : - downlaod the file "AIR-AP18XX-K9-ME-<version>.zip " - Unzip...

aleopoldie commented on Cisco Prime infrastructure template in Security and Network Management 3 months ago

Hello, I know you can configure a template occurring every 30 mn : Configuration > Templates...

aleopoldie commented on HA in Anchor controller Secnario in Getting Started with Wireless 3 months ago

I tested it and the client has to reconnect because the session is being anchored to another Anchor...

aleopoldie commented on Not possible to create a WLAN on the WLC through the prime ? in Wireless - Mobility 4 months ago

Alright I will do it with templates then. Thank you, AL

aleopoldie commented on Not possible to create a WLAN on the WLC through the prime ? in Wireless - Mobility 4 months ago

Yes this is working with this method but we are talking about templates that you deploy on a WLC....

aleopoldie commented on HA in Anchor controller Secnario in Getting Started with Wireless 4 months ago

Hello Waqas, There is no HA feature for Anchor WLCs like for Foreign WLCs. If you want to have...

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 4 months ago

Hi, Which version are you running ? AL

aleopoldie commented on ME:Config not synced to APs since no AP is present BUG:CSCva60696 in Cisco Bug Discussions 4 months ago

Hello guys, Had the same issue with 1832 running AireOS 8.3.102.0 I had to upgrade to 8.2.141.0...

aleopoldie commented on WLC client history sessions in Getting Started with Wireless 6 months ago

Hello Leo, I'm coming back on this topic to have more details about the client data retention and...

aleopoldie commented on How can i upgrade Prime 2.2 to 3.1 in Security and Network Management 7 months ago

Hello, What about the license ? I have a base license and lifecycle on prime 2.2 and I installed 3...

aleopoldie commented on Contrôleurs WLC locaux et centraux + Tunneling in French 8 months ago

Bonjour Eric, Vous pourriez réaliser cette architecture avec avec le Flexconnect. Des Access...

aleopoldie commented on Access point 1572 Max EIRP in Getting Started with Wireless 8 months ago

Hi Scott, thank you very much for this document. Where did you find it ? Just 2 questions, why we...

aleopoldie commented on Cisco Prime Infrastructure 3.1 in Security and Network Management 9 months ago

After the installation of MR 2, this solved the issue. Best, AL

aleopoldie commented on Understanding the power used by the Access Point 2702i in Other Wireless - Mobility Subjects 9 months ago

Hi Ric, Thank you, that point is clear. Nevertheless, I made 2 tests and I'm confusing something,...

aleopoldie commented on Cisco 1572 AP Tx Power Levels in Other Wireless - Mobility Subjects 9 months ago

Hi rasika, Are these values based on an AP 1572 withtout any antennas ? I would like to calculate...

aleopoldie commented on WLC with syslog facility in Security and Network Management 1 year ago

Hi, I already checked thi slink but it explains how to configure, not really the understanding...

aleopoldie commented on WLC with syslog facility in Security and Network Management 1 year ago

Hello Rasika, Thank you for your answer. Then if I well understand, we can choose any Local use...

aleopoldie commented on Direct connection between Foreign WLC and Anchor WLC in Security and Network Management 1 year ago

Thank you for answer Rasika. AL

Bio

User Badges:

aleopoldie's Stats

Points61
Discussion started 40
Answers marked as Correct 3
Endorsed 0
Content Rated 21