alexandrfedchenko

Member Since: Aug 01, 2010

English
alexandrfedchenko commented on Branch Router for Skype QoS in LAN, Switching and Routing 4 years ago

Privet Ivan"NBAR2" keyword did some magic and showed me this page: http://www.cisco.com/en/US/prod...

alexandrfedchenko commented on Small Business Router for Skype QoS in Small Business Routers 4 years ago

Hello Robert,Many thanks for you again I will ask in enterprise forum.

alexandrfedchenko commented on Small Business Router for Skype QoS in Small Business Routers 4 years ago

800, 1900 and 2900 series routers are IOS based and even have NBAR feature which you refer to.

alexandrfedchenko commented on Small Business Router for Skype QoS in Small Business Routers 4 years ago

Hello PanosCisco 800, 1900 and 2900 series are IOS based and reffer to Small Business Series:http...

alexandrfedchenko commented on Small Business Router for Skype QoS in Small Business Routers 4 years ago

Panos Asproulis написал(а):Skype is not using the SIP protocol but a proprietary one.Yes.And I need...

alexandrfedchenko commented on SG300 inter-VLAN routing and MAC address changes in incoming packets in Small Business Switches 4 years ago

Robert Cater написал(а):Alexandr,This is normal for the switch when working in layer 3 mode. I do...

alexandrfedchenko commented on SG300 inter-VLAN routing and MAC address changes in incoming packets in Small Business Switches 4 years ago

Hello, Robert.Many thanks for you help.But I'm little confused, because I've got some programs that...

alexandrfedchenko commented on SG300 inter-VLAN routing and MAC address changes in incoming packets in Small Business Switches 4 years ago

Here is ping packets captured by Wireshark when pinging switch itself (192.168.1.210) and outside...

alexandrfedchenko commented on SG300 inter-VLAN routing and MAC address changes in incoming packets in Small Business Switches 4 years ago

Hello DaveNo, ARP Proxy is NOT enabled on my switch, I'd checked.It was not enabled by default and...

alexandrfedchenko commented on how to configure port to connect switch SG300 to 3com switch in Small Business Switches 4 years ago

Use MAC-based VLANs on SG300 L2 switch, register all clients in needed VLANs (or better setup SG300...

alexandrfedchenko commented on Q-in-Q with only ONE switch. Will it work or not? in LAN, Switching and Routing 6 years ago

I am not sure why you want to do it like thisBecause I don't want to buy two switches, when enough...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

Now I seeMany thanks!

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

I would go with q in q then...Maybe you said about config like this:interface fa0/22switchport mode...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

I would go with q in q then..I don't understand youFirst, you said about layer3 solution prior to...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

My personal choice would be to use switches with layer 3 functionalityYes, I understand.But I don't...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

Can the SP provide a trunk instead of one specific VLAN ?No. We had talked about many times, but...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

If you are connecting  L3 Switch from Internet cloud or service provider ISP,would be easy to...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

Here's a good exampleThanks.But I have some specific: I have NO customer switch. My switches would...

alexandrfedchenko commented on What switches should be used? in LAN, Switching and Routing 6 years ago

Here are Ciscos products for Metro ethernet CPEBut there are ROUTERS not switches. Do I really need...

alexandrfedchenko commented on Are the ACLs in Cat3560 statefull or stateless? in LAN, Switching and Routing 6 years ago

i'm not sure the 3560 supports reflexive aclsNo, it isn't.The switch does not support these Cisco...

Bio












alexandrfedchenko's Stats

Points5
Discussion started 7
Answers marked as Correct 1
Endorsed 0
Content Rated 8