amar_5664

Member Since: Dec 08, 2008

English
amar_5664 commented on Transparent Mode in Firewalling 1 year ago

that is exactly where i am challenging myself as well Jon... with 65xx FWSM module this would just...

amar_5664 commented on Transparent Mode in Firewalling 1 year ago

Jon/Pranayappreciate your responses, i understand that and agree with you. Its been a great...

amar_5664 commented on Transparent Mode in Firewalling 1 year ago

this is exactly what i am trying to do but the other way round.... i was expecting subint and vlans...

amar_5664 commented on Transparent Mode in Firewalling 1 year ago

Thanks guys for your input much appreciated. This is purely for testing couple of scenarios when...

amar_5664 commented on Transparent Mode in Firewalling 1 year ago

thanks for your responses guys, what i gather is the only way to make it work is to have physically...

amar_5664 commented on GRE + Packet forwarding strange issues in WAN, Routing and Switching 2 years ago

2 things, 29xx wasnt fragmenting and as i enabled content-scan on to forward traffic to ScanSafe...

amar_5664 commented on BGP conditional advertisement + object tracking in WAN, Routing and Switching 3 years ago

Thanks abzal, appreciate your responses.

amar_5664 commented on BGP conditional advertisement + object tracking in WAN, Routing and Switching 3 years ago

Hi Abzal,Appreciate your response, but this will not influence larger part of the Internet...

amar_5664 commented on cisco 6509 error in Other Network Infrastructure Subjects 4 years ago

Thanks for your input leo

amar_5664 commented on Policy based routing qry! in WAN, Routing and Switching 4 years ago

Hi Giuseppe,Please refer below Switch Ports Model              SW Version            SW Image...

amar_5664 commented on incorrect DHCP server address to wireless client in Other Wireless - Mobility Subjects 4 years ago

This is great, thanks George.

amar_5664 commented on incorrect DHCP server address to wireless client in Other Wireless - Mobility Subjects 4 years ago

Thanks Steve, i just came across that document. Appreciate your help.

amar_5664 commented on BGP peer issue in WAN, Routing and Switching 4 years ago

Thanks for your input David, there are no firewalls within the path.

amar_5664 commented on BGP peer issue in WAN, Routing and Switching 4 years ago

Hi Smitesh,Yes we have confirmed with the ISP the password is certainly fine, we are not seeing...

amar_5664 commented on WLC client exclusion in Security and Network Management 4 years ago

any input regarding this question experts???

amar_5664 commented on WLC client exclusion in Security and Network Management 4 years ago

please correct me if i am wrong, as far as i know session timeout if for authenticated user...and...

amar_5664 commented on WLC client exclusion in Security and Network Management 4 years ago

you are right it is set under wlan -> advancedplease refer attached...

amar_5664 commented on wism2 mgmt via wireless in Security and Network Management 5 years ago

my baddd... apologies champ...too many things going on same time!!! i do appreciate your responses...

amar_5664 commented on wism2 mgmt via wireless in Security and Network Management 5 years ago

it does help but i had no intention to repeat what you mentioned... mine is a question and concern...

amar_5664 commented on WiSM2/WLC design in Security and Network Management 5 years ago

Thanks for the input, it is a centralized deployment so all of the traffic will be sent to WISM2s...

amar_5664 commented on multicontext mode shared interfaces in Firewalling 5 years ago

no i have not configured mac-add auto for any contexts, all of my internal traffic is forwarded...

amar_5664 commented on multicontext mode shared interfaces in Firewalling 5 years ago

it actually is entire network... entire network is unable to go through g0/0.10 interface...

amar_5664 commented on Route map issue in WAN, Routing and Switching 6 years ago

192.168.2.8 seems to be your Bluecoat Proxy device. Is your Bluecoat device able to ping Internet?...

amar_5664 commented on Qos Router Cisco With Firewall Fortigate in WAN, Routing and Switching 6 years ago

You probably need to assess how much traffic will be going through the firewall performance of your...

amar_5664 commented on BGP metric for Backup MPLS circuit in WAN, Routing and Switching 6 years ago

hey mate,according to your config i dont see ibgp peering, your neighbour commands only point to...

amar_5664 commented on Site-to-Site VPN as Primary with PtP as backup in an OSPF environment? in WAN, Routing and Switching 6 years ago

hi Jim,you can run OSPF on top of IPSEC using GRE. if the ipsec is not established i dont have any...

amar_5664 commented on BGP metric for Backup MPLS circuit in WAN, Routing and Switching 6 years ago

hey brian,it should have nothing to do with SP, can you post configs of your router. how are you...

amar_5664 commented on BGP metric for Backup MPLS circuit in WAN, Routing and Switching 6 years ago

chetan the highest weight will be preferred ... so it should be the other way round... router bgp...

amar_5664 commented on Point to point connection using E1 network in WAN, Routing and Switching 6 years ago

not sure what you are trying to achieve this is end of life modelyou can use VWIC-1MFT-T1/E1 or...

amar_5664 commented on EIGRP not working on 3560 in LAN, Switching and Routing 6 years ago

i understand that you can ping from switch to 3560... your new diagram includes a link between two...

amar_5664 commented on EIGRP not working on 3560 in LAN, Switching and Routing 6 years ago

do u mean to say u can ping from your 2960 switch to 3560 router..i want to know can you ping from...

amar_5664 commented on EIGRP not working on 3560 in LAN, Switching and Routing 6 years ago

mate,according to your diagram you dont have any interconnect between the switches or the routers....

amar_5664 commented on Routing table/OSPF issue in WAN, Routing and Switching 6 years ago

g'day rick...thanks champ... i was so dug into the issue and annoyed about it but you pointed me in...

amar_5664 commented on Routing table/OSPF issue in WAN, Routing and Switching 6 years ago

Thanks for that, i just ran a debugPlease let me know if require anything else, i tried almost...

amar_5664 commented on Routing table/OSPF issue in WAN, Routing and Switching 6 years ago

I checked that multiple times on all of my routers, the routes that are playing up are stable on...

amar_5664 commented on Cisco VSS in WAN, Routing and Switching 6 years ago

You mean to say if you remove the SUP engine from the chassis will that particular chassis work, it...

amar_5664 commented on How can I release the GSR's memory? in WAN, Routing and Switching 6 years ago

Mate,Recently i had similar issue on my ASR1004. You will need to check memory usage regularly by...

amar_5664 commented on Access Problem in Firewalling 6 years ago

Dont worry guys, i have identified and solved the issue. It is working fine now.

amar_5664 commented on MPLS VPN - CE configuration with static routing in WAN, Routing and Switching 6 years ago

Hi Sunny,As you mentioned you will be using static routing, could you please confirm is static...

amar_5664 commented on Router reboot in Other Network Infrastructure Subjects 6 years ago

Hey mate,Router does not have crashfile subdirectory...version is in the log above....Cisco 2821 (...

amar_5664 commented on OSPF issue in WAN, Routing and Switching 6 years ago

Reza and Jon thanks for your input, the issue is resolved....unfortunately there was a faulty card...

amar_5664 commented on OSPF issue in WAN, Routing and Switching 6 years ago

Hi Jon,Yes it is pingable, but this morning i am dropping some packets and have input errors on...

amar_5664 commented on OSPF issue in WAN, Routing and Switching 6 years ago

Mate below is the config details.....Router Ainterface ATM4/0 description xxxxx no ip address load-...

Bio












amar_5664's Stats

Points5
Discussion started 30
Answers marked as Correct 1
Endorsed 0
Content Rated 9