andrea.meconi@compaq.com

Member Since: Jan 09, 2002

English
andrea.meconi@compaq.com's Activity on Cisco Support Community
Currently displaying 50 results

andrea.meconi@compaq.com has commented on Migrate standalone 6500 switch to VSS.

2 months 1 week ago
Hello Christian.Yes, you need to change one ID.When VSS is enabled, two...

andrea.meconi@compaq.com has created Cisco Secure Access Control System 5.5, device limit.

3 months 3 weeks ago
Hello.What happens when my ACS 5.5 deployment reaches the devices limit?Thanks....

andrea.meconi@compaq.com has commented on 2960 switches stop responding.

4 months 4 days ago
Maybe Leo!For one of these switches, I was able to login using local account...

andrea.meconi@compaq.com has commented on 2960 switches stop responding.

4 months 4 days ago
Many thanks for your time Leo.Uptime? Some days only.I changed five switches...

andrea.meconi@compaq.com has commented on 2960 switches stop responding.

4 months 4 days ago
Vasilli,I think I need to power off the switches.Regards.Andrea

andrea.meconi@compaq.com has commented on 2960 switches stop responding.

4 months 4 days ago
Hello Leo.No, I don't get any message, only the banner!Thanks.Andrea 

andrea.meconi@compaq.com has commented on 2960 switches stop responding.

4 months 1 week ago
Hello Vasilii.All switches use AAA with Cisco Secure ACS, which works fine for...

andrea.meconi@compaq.com has created 2960 switches stop responding.

4 months 1 week ago
Hello.I have four 2960 running 12.2(55)SE7.These switches stop responding at...

andrea.meconi@compaq.com has created RADIUS, auhentication failed.

4 months 3 weeks ago
Hello at all.We have a PIX running 8.0.We registered two authentication on our...

andrea.meconi@compaq.com has created Cisco Secure Access Control System 5.5, how to install UCP.

5 months 1 week ago
Hello.Where can I find detailed informations to install this service?Thanks....

andrea.meconi@compaq.com has commented on More info about WS-X6148A-GE-45AF.

5 months 3 weeks ago
Many thanks.Regards.Andrea

andrea.meconi@compaq.com has commented on More info about WS-X6148A-GE-45AF.

5 months 3 weeks ago
Thanks Inayath.So, one block has one gigabit ASIC available. Where can I find...

andrea.meconi@compaq.com has created More info about WS-X6148A-GE-45AF.

5 months 3 weeks ago
Hello.I'm looking for more info about WS-X6148A-GE-45AF and channel. I do...

andrea.meconi@compaq.com has commented on OSPF and redistribute connected subnets.

6 months 23 hours ago
Hello.I appreciate your suggestions.My mistake is a network entry on OSPF...

andrea.meconi@compaq.com has created OSPF and redistribute connected subnets.

6 months 1 day ago
Hello.I’m using a Catalyst with a hybrid configuration. MSFC3 is running...

andrea.meconi@compaq.com has created Migrading an ACS deployment from 4.2 to 5.3.

7 months 1 week ago
Hello.Last year I migrated from ACS 4.2 to 5.3 using the migration utility.Now...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

9 months 2 weeks ago
Many thanks Abdul but that post doesn't help me.I'm using ACS version 5...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

9 months 2 weeks ago
Many thanks Abdul but that post doesn't help me.I'm using ACS version 5...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

9 months 2 weeks ago
Many thanks for your help.Done, but the service doesn't restart anyway....

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

9 months 2 weeks ago
Many thanks for your help.Done, but the service doesn't restart anyway....

andrea.meconi@compaq.com has created Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

9 months 2 weeks ago
Hello at all.I'm restoring a 5.3 backup to a new ACS 5.5 patch 3.Restore...

andrea.meconi@compaq.com has commented on Cisco ACS 5.3, restore issue.

9 months 3 weeks ago
Hello Mohana and many thanks for your help.I solved my issue using another and...

andrea.meconi@compaq.com has commented on Cisco ACS 5.3, restore issue.

9 months 3 weeks ago
Hello Mohana and many thanks for your help.I solved my issue using another and...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

9 months 4 weeks ago
Many thanks Jatin.I'm able to access to GUI using my browser, Firefox. But...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

9 months 4 weeks ago
Many thanks Jatin.I'm able to access to GUI using my browser, Firefox. But...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

9 months 4 weeks ago
Many thanks Jatin.I'm able to access to GUI using my browser, Firefox. But...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

9 months 4 weeks ago
Many thanks Jatin.I'm able to access to GUI using my browser, Firefox. But...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 day ago
Edward,GUI doesn't come up so I'm going to open a case.Many many thanks...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 day ago
Edward,GUI doesn't come up so I'm going to open a case.Many many thanks...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 3 days ago
Many many thanks Edward.I'm using this attribute to configure a VPN...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 3 days ago
Many many thanks Edward.I'm using this attribute to configure a VPN...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 3 days ago
Hello Edward.I turn on debug with this command acsuno/admin# acs-...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 4 days ago
Hello Edward.I turn on debug with this command acsuno/admin# acs-...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 4 days ago
Edward, many many thanks for your help.I have changed the debug level. Now I...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 4 days ago
Edward, many many thanks for your help.I have changed the debug level. Now I...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 5 days ago
Sorry Edward, is it related to bug ID CSCum67932? If so, this bug is resolved...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 5 days ago
Sorry Edward, is it related to bug ID CSCum67932? If so, this bug is resolved...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 6 days ago
Backup comes from 5.3, patch 9 and Pointed-PreUpgrade.Restore to 5.5, fresh...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 6 days ago
Backup comes from 5.3, patch 9 and Pointed-PreUpgrade.Restore to 5.5, fresh...

andrea.meconi@compaq.com has commented on Question about TACACS source interface.

10 months 6 days ago
Hello Edward!  aaa new-model!!aaa group server tacacs+...

andrea.meconi@compaq.com has created Question about TACACS source interface.

10 months 6 days ago
Hello.I'm reading more posts about the "ip tacacs source-interface...

andrea.meconi@compaq.com has commented on Question about TACACS source interface.

10 months 6 days ago
Hello Edward!  aaa new-model!!aaa group server tacacs+...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 6 days ago
Edward,I'm trying to reimage. After a successfully restore, application is...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 6 days ago
Edward,I'm trying to reimage. After a successfully restore, application is...

andrea.meconi@compaq.com has created Question about TACACS source interface.

10 months 6 days ago
Hello.I'm reading more posts about the "ip tacacs source-interface...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 week ago
Yes Edward.I try starting it manually also.Reimage maybe the solution....Thanks...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 week ago
Yes Edward.I try starting it manually also.Reimage maybe the solution....Thanks...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 week ago
After the upgrade, runtime process is not monitored and application doesn't...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 week ago
After the upgrade, runtime process is not monitored and application doesn't...

andrea.meconi@compaq.com has commented on Upgrading an ACS deployment from 5.3 to 5.5.

10 months 1 week ago
Many thanks Edward.So with my deployment, where the primary server also...

Bio












andrea.meconi@compaq.com's Stats

Points38
Discussion started 267
Answers marked as Correct 1
Endorsed 1
Content Rated 60