andywi928

Member Since: May 08, 2011

English
andywi928's Activity on Cisco Support Community
Currently displaying 26 results

andywi928 has commented on rv320 - port forwarding from a specific WAN IP

9 months 2 weeks ago
I have the same problem, and have already tried creating a Access Rule without...

andywi928 has commented on rv320 - port forwarding from a specific WAN IP

9 months 2 weeks ago
I have the same problem, and have already tried creating a Access Rule without...

andywi928 has commented on RV180W - cannot add any AP to network

1 year 9 months ago
Hello Folks,I have far too much experience with this exact issue on the RV180w...

andywi928 has commented on Clarification on SIP Forwarding in Greyfield Deployments

2 years 1 week ago
Hello Nagaraja,All of these customers use some form of DSL or ATT Uverse. In...

andywi928 has created Clarification on SIP Forwarding in Greyfield Deployments

2 years 1 week ago
I have a number of customers using the RV180w Small Business Firewall/Router in...

andywi928 has commented on Greyfield Deployment of UC320w with RV120w

2 years 7 months ago
Based on this info, I tried disabling the DMZ and adding an access rule at the...

andywi928 has created Greyfield Deployment of UC320w with RV120w

2 years 7 months ago
I have a number of customers using the RV120w Small Business Firewall/Router in...

andywi928 has commented on UC320w wrong name displayed when calling extension

2 years 8 months ago
I have a customer experiencing this exact issue as well. There have been no...

andywi928 has created SPA500s End-User Programming of Speed Dials

3 years 2 months ago
Hello Folks,I have installed several SPA500s sidecars on various SPA525G2...

andywi928 has created Port Forwarding Delete Not Working

3 years 3 months ago
Hello Folks,I have a customer running 2.1.4 (3) firmware that has requested...

andywi928 has created FXS Problems

3 years 5 months ago
Hello Folks,I have recently installed two UC320 systems for customers, each...

andywi928 has commented on NexVortex Call Routing and Headers

3 years 5 months ago
Hello Navin, Thanks for the update. My customers can work around this issue...

andywi928 has commented on Re-display Speed Dial Labels on SPA50x Mid-Call

3 years 5 months ago
Hello Chris,Yes, that's what we needed. I tried left/right buttons, but must...

andywi928 has created Re-display Speed Dial Labels on SPA50x Mid-Call

3 years 5 months ago
Is there a way to re-display the speed dial button labels on a SPA509g in the...

andywi928 has created NexVortex Call Routing and Headers

3 years 5 months ago
Hello Folks,I have begun using NexVortex as a SIP trunk provider for my UC320,...

andywi928 has commented on UC320 Blocking Long Distance from Some Extensions

3 years 5 months ago
Hello Chris,Thanks for the update. This will defintely be a request from...

andywi928 has created UC320 Blocking Long Distance from Some Extensions

3 years 6 months ago
Hello Folks,I have a customer that needs to block dialing of long distance...

andywi928 has commented on New FW v2.1.1 CLID Option Problems and Questions

3 years 6 months ago
OK, I think I see the difference between your scenario and some of my customer...

andywi928 has commented on New FW v2.1.1 CLID Option Problems and Questions

3 years 6 months ago
Hello Chris,I agree that the system should work as you describe. However, per...

andywi928 has commented on New FW v2.1.1 CLID Option Problems and Questions

3 years 6 months ago
Hello Chris,The scenario is several of my small business customers that have...

andywi928 has created New FW v2.1.1 CLID Option Problems and Questions

3 years 6 months ago
I have conducted testing of the new v2.1.1 CLID option that allows a customer...

andywi928 has created SIP Providers and Disaster Recovery Call Forwarding to Cell Phone

3 years 6 months ago
I am beginning to install the UC320 into my small business customer...

andywi928 has created UC320W Caller ID Forwarding to Cell Phone

3 years 9 months ago
Hello Folks,I need the ability to forward calls to my cell phone and have the...

andywi928 has commented on Apply Configuration Hangs

3 years 10 months ago
I too am having the same problem on the current 2.0.6 (10) General Release. I...

andywi928 has commented on UC320 Wireless Blocking?

3 years 10 months ago
Hello Jeff,Yes, Topology 3 is being used currently. I am currently using a very...

andywi928 has created UC320 Wireless Blocking?

3 years 10 months ago
I am working with a UC320 test system in my office prior to an upcoming...

Bio












andywi928's Stats

Points0
Discussion started 12
Answers marked as Correct 0
Endorsed 0
Content Rated 1