anikas

Member Since: Oct 14, 2003

English
anikas commented on errors after upgrade CIMC from ver 1.4.7b to1.5.1b in Unified Computing 3 years ago

What is happening is that the JNLP (Java Network Launch Protocol) files are being downloaded to the...

anikas commented on No FC4-TYPE feature 6140 and MDS9148 in Unified Computing 4 years ago

Dulmer,     Have a look at the following link:https://supportforums.cisco.com/docs/DOC-6186Please...

anikas commented on UCS Exam question in Unified Computing 4 years ago

Tanmay,This is not the forum for answering exam questions. The intent is to maintain the integrity...

anikas commented on Power Consumption in UCS in Unified Computing 4 years ago

Amit,Again Jeremy is correct. given your illustration grid is the way to go.The best way to figure...

anikas commented on Callmanager 8.6 and modify called number in Unified Computing 4 years ago

Dennis,     I am not a call manager expert, but I know that this possible as when we dial 11 digits...

anikas commented on Power Consumption in UCS in Unified Computing 4 years ago

Amit,     Jeremy is correct. I have included an excerpt from the documentation explaining the...

anikas commented on Power Consumption in UCS in Unified Computing 4 years ago

Amit, Please have a look at the following document. I think it will answer your questions.Managing...

anikas commented on New UCS C210 problem with Video Monitor Output in Unified Computing 4 years ago

I'm glad I was able to help.Here are the instructions for setting up the CIMChttp://www.cisco.com/...

anikas commented on New UCS C210 problem with Video Monitor Output in Unified Computing 4 years ago

Ok the fans spinning up and then down along with the lights on the front would indicate to me the...

anikas commented on [ITP7613] Can i disable this notice ? in WAN, Routing and Switching 4 years ago

Sangrae,     It looks like you are running into the following defect. CSCtg35799    Bogus notice...

anikas commented on New UCS C210 problem with Video Monitor Output in Unified Computing 4 years ago

Ramon,Have you tried booting the server with the monitor removed first and wait 5 minutes and plug...

anikas commented on Fabric Manager and UCS FI in Storage Networking 4 years ago

I'm not an expert in Fabric Manager but I know there is limited support for the UCS. I have looked...

anikas commented on UCS 200 M1 Power On Hang @ "Configuring and testing memory, please wait..." in Unified Computing 4 years ago

I'm glad that I was able to help. AndreasSent from Cisco Technical Support iPhone App

anikas commented on UCS 200 M1 Power On Hang @ "Configuring and testing memory, please wait..." in Unified Computing 4 years ago

Also I forgot to mention that the beeps are probably just your USB related devices, like a mouse....

anikas commented on UCS 200 M1 Power On Hang @ "Configuring and testing memory, please wait..." in Unified Computing 4 years ago

The host upgrade utility is not supported until release 1.2.This may have been the cause of some of...

anikas commented on DC PSU's for Nexus 5548UP in Other Data Center Subjects 4 years ago

Sorry but that was the best I could find. Hope it helps.Sent from Cisco Technical Support iPhone App

anikas commented on UCS210M2 doesnt boot after failed CIMC upgrade in Unified Computing 4 years ago

You can try one more thing to reset the CIMC. It requires the removal of the power cords at the...

anikas commented on Nexus 1010 CIMC interface and management 0: same or different in Other Data Center Subjects 4 years ago

Yes they are different. The management address is used for the 1010 itself where the CIMC is like...

anikas commented on UCS210M2 doesnt boot after failed CIMC upgrade in Unified Computing 4 years ago

Can you ssh into the server? If you can try to reboot the CIMC. If that does not help you can try...

anikas commented on DC PSU's for Nexus 5548UP in Other Data Center Subjects 4 years ago

This is what I was able to find. Hope this helpsI was only able to see it In the DCNM release notes...

anikas commented on Nexus 1010 CIMC interface and management 0: same or different in Other Data Center Subjects 4 years ago

The CIMC is the Cisco Integrated Management Controller. It is the GUI interface that allows you to...

anikas commented on Why 3rd-party servers vendors for UC on VMWare is not supported? in Unified Computing 4 years ago

I'm not a UC expert but i have included two links that i feel should answer your questions. The...

anikas commented on UCS 2.0(1s) - b200-m2 - remove hard disk - constant error in Unified Computing 4 years ago

Excellent news looks like it was that defect and the deep discovery did the trick. Thanks for the...

anikas commented on Fabric Interconnect 6120xp question in Unified Computing 4 years ago

On the FI with the 0.0.0.0 ipaddress  run the sho npv inter info | inc IP.Next go into UCSM and...

anikas commented on PGW 2200 events alerts (auto) alerts over email in Other Service Provider Subjects 4 years ago

The Pgw is not setup to send these type of alerts via email. You can however use SNMP to monitor...

anikas commented on UCS 2.0(1s) - b200-m2 - remove hard disk - constant error in Unified Computing 4 years ago

What is the local disk policy set to. Is it set to none?Sent from Cisco Technical Support iPhone App

anikas commented on UCS 2.0(1s) - b200-m2 - remove hard disk - constant error in Unified Computing 4 years ago

I'm sorry I thought you had the error before esxi was loaded. I have found some instances of this...

anikas commented on Nexus 7K, getting invalid SSH key format allways in Other Data Center Subjects 4 years ago

Have you looked at these documents?http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os...

anikas commented on Cisco UCS -Network, etc. in Unified Computing 4 years ago

In 2.0 end host mode supports disjoint L2 networks.There are a number of links that detail this and...

anikas commented on UCS 2.0(1s) - b200-m2 - remove hard disk - constant error in Unified Computing 4 years ago

There is a defect out there that may explain your issue.CSCtt87598 Incorrect fault "local disk...

anikas commented on Ip conflict issue of UCS B server in Unified Computing 4 years ago

Try shutting down the server and ping the ip address. If it still works you have a duplicate.Sent...

anikas commented on CCIE Datacenter in Certifications 4 years ago

It was mentioned at the last cisco live.Sent from Cisco Technical Support iPhone App

anikas commented on nexus switches - is the commands different than IOS in Other Data Center Subjects 4 years ago

Here is a great link detailing a comparison of the two.http://docwiki.cisco.com/wiki/Cisco_NX-OS/...

anikas commented on ERSPAN on nexus1000v in Server Networking 4 years ago

It is my understanding that wireshark will do what you are looking for.http://www.wireshark.org/....

anikas commented on Moving Service Profile Template and Service Profiles to new Organization? in Unified Computing 4 years ago

...I have never tried the XML method that you described bit can tell you that you can not move the...

anikas commented on Relocating blade from Chassis to Chassis in Unified Computing 4 years ago

That is exactly correct

anikas commented on Relocating blade from Chassis to Chassis in Unified Computing 4 years ago

Nick,     If you are trying to just physically move the servers from one chassis to another and you...

anikas commented on Upgrading Cisco UCS from Release 1.4(2b) to Release 1.4(3) in Unified Computing 4 years ago

Gaurav,          While it is not mandatory to upgrade, I wanted to point out that 1.4(2b) is a...

anikas commented on PGW2200 Called pty status modification in ACM in Voice over IP 5 years ago

I have listed some other options for you to try, but be warned that they  may cause some...

anikas commented on DCNM in Other Data Center Subjects 5 years ago

I have been able to find the following information for DCNM and SNMP version.I was not able to find...

anikas commented on I am looking for specific documentation in Other Data Center Subjects 5 years ago

The closest thing that have been able to find is the following PDF. Please let me know if this...

anikas commented on Nexus 1000V Serial Number in Other Data Center Subjects 5 years ago

Looks like the host id is your serial number according to the following url:Obtaining a Permanent ...

anikas commented on PGW2200 Called pty status modification in ACM in Voice over IP 5 years ago

If you are using a nailed PGW this means that the GW is not sending you an alerting. Normally ACM...

anikas commented on UCS Server BIOS update Linux in Unified Computing 6 years ago

Have you been able to do this using the EFI interface?Updating the BIOS Firmware by Using the EFI...

anikas commented on Help with PGW in call control mode in Voice over IP 6 years ago

Have a look at the following  sample configs.Cisco PGW 2200 Provisioning Exampleshttp://www.cisco....

anikas commented on PGW:Integrated SLT fails to get ss7 alignment with itu2LSC_LinkFailure reason=0x5 (Two or three invalid BSNs) in Voice over IP 6 years ago

I looked at the debug and this could be any number of things that would caise the BSN failures....

anikas commented on need help cisco products. in Other Service Provider Subjects 7 years ago

Shala, This product is the Cisco PGW2200.Specifically, it is running the 9.7(3) software release...

anikas commented on Recognize these ports? in Voice over IP 7 years ago

Looking at the RFC I do not see those defined.

anikas commented on Lawfull intercept with PGW2200 & AS5400 in Voice over IP 7 years ago

Sohail-khan, Please have a look at the following URL:http://www.cisco.com/en/US/docs/...

anikas commented on mtp2 not stable in Voice over IP 7 years ago

I am glad that it was resolved. These are the most common causes of these issues.

Bio

Voice, SS7, STP and call agent support for the past 13 years and 7 more in telecom.
Currently support the Cisco UCS Datacenter products.











anikas's Stats

Points69
Discussion started 0
Answers marked as Correct 5
Endorsed 1
Content Rated 0