anilrs3

Member Since: Jul 02, 2009

English
anilrs3 commented on Unable to ping between IPV6 addresses within the same LAN in WAN, Routing and Switching 3 years ago

Hello Harold,I have tried IOS Ver 15.1(4)M5 and can perform IPV6 via the switch ports . Works fine...

anilrs3 commented on Unable to ping between IPV6 addresses within the same LAN in WAN, Routing and Switching 3 years ago

Hello Harold,Many thanks for the update . At present I am using IOS - 15.1(4)M2. I will try with...

anilrs3 commented on (S,G) entry in RP in WAN, Routing and Switching 4 years ago

Sorry from my side , as i think i made some confusion here !! . Ok , there is unicast route back to...

anilrs3 commented on (S,G) entry in RP in WAN, Routing and Switching 4 years ago

There is no RPF interface for this source inorder to send reg stop msg. Here RP will fail in RPF...

anilrs3 commented on (S,G) entry in RP in WAN, Routing and Switching 4 years ago

RPF lookup will not be performed for the unicast source reg msg. Once RP decapsulate uni source reg...

anilrs3 commented on (S,G) entry in RP in WAN, Routing and Switching 4 years ago

Hi Peter,You are right. But  i don't want to use default mroute for RPF check , instead i use...

anilrs3 commented on Set AS-PATH prepend by matching RT value during import in MPLS 4 years ago

Hi Ashish,I also did the same , it worked after setting local pref while impporting. Many thanks...

anilrs3 commented on Multicast capacity planning in WAN, Routing and Switching 4 years ago

Can provide BW reservation for this on the CPE, also need to set IPP value so that the PEs can use...

anilrs3 commented on Multicast capacity planning in WAN, Routing and Switching 4 years ago

Thanks for the info. Also i am searching . how to configure end to end  QOS for multicast within...

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

. i know it is not a good solution , still i need to check the possibilities to use this. I don't...

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

Hi Frank,Very much appriciate your input. Basically we don't want to enable multicast in the core....

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

Hi Frank,We are the service providers and we are managing the CPEs for the customers. But we don't...

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

Hi Frank,I think iperf should be fine for me as i have few laptops which can simulte sender and few...

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

Hi Dan/Frank,Thanks for the suggetions. I would like to try iPERF as i think this is quite easy...

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

Hi Dan,Thanks for the good info. I tried to stream video in VLC player and the client within the...

anilrs3 commented on Multicast Testing tool for windows in MPLS 4 years ago

Hi Dan,I need to create multicast streams using some applications so can't use ping or IGMP to test...

anilrs3 commented on NG-MVPN support in Cisco in WAN, Routing and Switching 4 years ago

Hi Giuseppe,I can understand that while using NG-MVPN , no need to enable multicast within the core...

anilrs3 commented on QOS on Etherchannel in Cisco 3560 in WAN, Routing and Switching 4 years ago

No, this is etherchannel with FE interfaces. QOS i need here is to match the packets and assign...

anilrs3 commented on QOS on Etherchannel in Cisco 3560 in WAN, Routing and Switching 4 years ago

Hi Riccardo,Thanks for the mail. I am just thinking about configuring QOS service-policy under the...

anilrs3 commented on HSRP tracking IPSEC session status in WAN, Routing and Switching 4 years ago

Yes, i am going to do that only now. Object tracking with HSRP.Thanks,Anil.

anilrs3 commented on HSRP tracking IPSEC session status in WAN, Routing and Switching 4 years ago

Hi Rick,Thanks Rick, i thought about the object tracking as you said. Was searching for some thing...

anilrs3 commented on VRF aware muliple GRE tunnel over one IPSEC site to site VPN in WAN, Routing and Switching 5 years ago

Many thanks for all replied for my query. I have managed to do this design by using two diffrent...

anilrs3 commented on VRF aware muliple GRE tunnel over one IPSEC site to site VPN in WAN, Routing and Switching 5 years ago

Hi Vikram & Konstantin,Thanks for your valuable suggestions. The slight difference from your...

anilrs3 commented on VRF aware muliple GRE tunnel over one IPSEC site to site VPN in WAN, Routing and Switching 5 years ago

Thanks Andrew. Running BGP over GRE which is running over IPSEC tunnel is a common design. This...

anilrs3 commented on QOS in VPLS in MPLS 5 years ago

Done ..

anilrs3 commented on QOS in VPLS in MPLS 5 years ago

Hi Smitesh,Sorry , i was looking for the option to close this tread but could't find. Can you...

anilrs3 commented on QOS in VPLS in MPLS 5 years ago

Thanks -Anil

anilrs3 commented on QOS in VPLS in MPLS 5 years ago

So on the CE i need to mark based on the L2 COS values and i think i need to set 802.1p priority...

anilrs3 commented on QOS in VPLS in MPLS 5 years ago

Hi Varma,Thanks for your reply. I am not sure how we can deply the QOS in Layer 2 in the case of...

anilrs3 commented on VPLS MTU requirement in MPLS 5 years ago

Many thanks Riccardo   -Anil

anilrs3 commented on VPLS MTU requirement in MPLS 5 years ago

Hi Riccardo,Many thanks for the  detailed info. So just to confirm in the example MTU calculation...

Bio












anilrs3's Stats

Points0
Discussion started 11
Answers marked as Correct 0
Endorsed 0
Content Rated 15