Andrea Florio

Member Since: Oct 26, 2010

User Badges:

English
Andrea Florio commented on Access List (ACL) to Block Russian and Chinese Nets From Routers in Other Security Subjects 3 months ago

thanks. i'm going trough the document but i can't understand why you don't summarize. :) 

Andrea Florio commented on IPv6 Migration example using LISP in IPv6 Integration and Transition 5 months ago

If you are using LISP with a Proxy xTR (use-petr) what considerations needs to be done in regards...

Andrea Florio commented on RADIUS authentication SF300-24P in Small Business Switches 5 months ago

Solution was easy for me. Service-Type needs to be set to Administrative-User a.florio Auth-Type...

Andrea Florio commented on Using otv with Microsoft NLB in LAN, Switching and Routing 10 months ago

Did you ever managed to solve this?  it seems like i have the same problem as you have.

Andrea Florio commented on WAP-371 Radio disappear after firmware upgrade in Small Business Wireless 2 years ago

i managed to make it work. after two downgrades/upgrades It started to work. What I had to do, was...

Andrea Florio commented on WAP4410N wireless traffic locks up even when running latest firmware update in Small Business Wireless 3 years ago

i didn't see any answer from you, so i guess the work around worked...i'm using the latest firmware...

Andrea Florio commented on Multicast over DMVPN,IPSEC,GRE in WAN, Routing and Switching 3 years ago

i just found this post and i might be late any way, DMVPN is a NBMA network, therefore you need on...

Andrea Florio commented on IPv6 Tunnel Input Wedged on 15.1(4)M4/M5 in IPv6 Integration and Transition 3 years ago

looks like that it wasn't fixed with M7 ...http://www.cisco.com/en/US/docs/ios/15_1/release/notes/...

Andrea Florio commented on Dyndns Update Script in EEM Scripting 3 years ago

Hello Joseph,Thank you so much, it's working that's how the whole script would look like:::cisco::...

Andrea Florio commented on IPv6 Tunnel not working from 15.0M to 15.1M in IPv6 Integration and Transition 4 years ago

it's a bug!https://supportforums.cisco.com/message/3860601

Andrea Florio commented on IPv6 Tunnel Input Wedged on 15.1(4)M4/M5 in IPv6 Integration and Transition 4 years ago

yes, it's incredibly easy to reproduce and it takes just few seconds. yes correct, 15.1(4)M3 is no...

Andrea Florio commented on IPv6 Tunnel Input Wedged on 15.1(4)M4/M5 in IPv6 Integration and Transition 4 years ago

i have got exactly the same issue... how did you solved ? (if you did) running M3 ? Gateway#sh int...

Andrea Florio commented on IPv6 Tunnel not working from 15.0M to 15.1M in IPv6 Integration and Transition 4 years ago

still no luck.. it works for a while, then dies..Gateway#ping google.com repeat 1000Type escape...

Andrea Florio commented on IPv6 Tunnel not working from 15.0M to 15.1M in IPv6 Integration and Transition 4 years ago

Thank you, i will try to remove the config and apply it again, following your template...what i am...

Andrea Florio commented on IPv6 Tunnel not working from 15.0M to 15.1M in IPv6 Integration and Transition 4 years ago

also i do not use any zbf configuration.  my lan interface:Gateway#sh run int fa0/0Building...

Andrea Florio commented on IPv6 Tunnel not working from 15.0M to 15.1M in IPv6 Integration and Transition 4 years ago

i have the same problem! but i believe is a bug. the same configuration works with the T train.my...

Andrea Florio commented on basic cisco 837 adsl configuration : slow connectivity in LAN, Switching and Routing 6 years ago

the problem was the mtu!no ip mtuinto the DIaler interface solved the issue.for people how's...

Andrea Florio commented on AP 1242 AG in Other Wireless - Mobility Subjects 6 years ago

the instructions looks great but.. where can i get c1200-k9w7-tar.122-15.JA.tar or equivalent for...

Bio

User Badges:

Andrea Florio's Stats

Points5
Discussion started 6
Answers marked as Correct 0
Endorsed 0
Content Rated 2