art-barrera

Member Since: May 29, 2008

English
art-barrera commented on 702W and Prime 2.2 in Getting Started with Wireless 1 year ago

Update: This feature is currently not supported on Prime 2.2TAC has created an internal Bug Id:...

art-barrera commented on Microsoft NLB and Cisco 4500 VSS in LAN, Switching and Routing 2 years ago

Found that I was hitting bug CSCuf69779  Upgraded and problem went away.Thx //art

art-barrera commented on Microsoft NLB and Cisco 4500 VSS in LAN, Switching and Routing 2 years ago

Hi Rick,I know this post is dated but I ran into this exact same issue yesterday and I've hit a...

art-barrera commented on Access Port / CDP Output w/LAP in Getting Started with Wireless 2 years ago

Thx Scott - appreciate the response.//art

art-barrera commented on WLC 7.5 Bonjour/mDNS at multiple sites in Other Wireless - Mobility Subjects 3 years ago

Thanks Scott...that's consistent with what I've observed for wireless clients.With reference to any...

art-barrera commented on WLC 7.5 Bonjour/mDNS at multiple sites in Other Wireless - Mobility Subjects 3 years ago

Absolutely subscribed to this one.  Very interested in any results, findings or opinions.  Thx! //...

art-barrera commented on Can't access prime ncs via web interface in Security and Network Management 3 years ago

This process worked for me today.  My appliance had a 10.1.1.118 ip address in that file which was...

art-barrera commented on Poor wireless performance on 1142 in Getting Started with Wireless 3 years ago

Thbk you for the information. I think I asked for the wrong output. What I wanted to verify was the...

art-barrera commented on Poor wireless performance on 1142 in Getting Started with Wireless 3 years ago

While your connected to the new 1142 ap, can you capture the output from the sho dot11 associations...

art-barrera commented on 1242 bridge mode problem in Getting Started with Wireless 3 years ago

Once you converted the ap to "bridge" mode it reloads and tries to come up on the network as a Mesh...

art-barrera commented on Compatible APs for Cisco WLC 2504 in Wireless IP Voice and Video 3 years ago

Really you should look at it more from a question of what software version is compatible for the...

art-barrera commented on 40 wide channel question in Security and Network Management 3 years ago

I would ask them to send you the ouput from their analysis.  Perhaps they saw x2 different ap's...

art-barrera commented on Wireless Bridge Deauthenticationing in Other Wireless - Mobility Subjects 3 years ago

Agreed, check output of "sho dot11 associations" and look for signal strength and signal to noise...

art-barrera commented on Cisco Aironet AIR-AP1142N-E-K9 5ghz problem in Other Wireless - Mobility Subjects 3 years ago

Given the filename of the code running "w7" indicates  standalone deployment.  Your interface...

art-barrera commented on Poor wireless performance on 1142 in Getting Started with Wireless 3 years ago

Hey Scott - quick question while OP competes his testing.  I'm accustomed to using the ip default-...

art-barrera commented on Ask the Expert: Cisco Unified Wireless and Cisco Unified Access in Getting Started with Wireless 3 years ago

Hi everyone and thanks for your time in this forum.  Couple of quick questions:  I've not had the...

art-barrera commented on Cisco WLC 5508 - NPS Radius in Security and Network Management 3 years ago

You don;t by chance have any Radius configured on the controller do you?  Nothing local?  //art

art-barrera commented on Wireless Authentication and Windows 8 in Security and Network Management 3 years ago

You mentioned you were running both WPA-TKIP and WPA2-AES (should prbably reconsider that).  In the...

art-barrera commented on AP LED Problem in Wireless IP Voice and Video 3 years ago

I think the bug was for something similar on the 3500 and 1260's:·         AP may be unable to boot...

art-barrera commented on Detecting rogue AP messages in syslog? configuring WLC. in Security and Network Management 3 years ago

RLDP and an ap in Roge Detector mode can be turned on using just the controller.  Both will tell...

art-barrera commented on Power injector or power adapter? in Getting Started with Wireless 3 years ago

Agreed - no connection back to switch required; however, 802.3af standards still apply.  Here is a...

art-barrera commented on Two Network Connections and One Wireless Controller in Security and Network Management 3 years ago

Wow - that is crazy!  Good to know and thanks for the info.  I've used two ports (typically on 2504...

art-barrera commented on AP join to NAT:ed controller? in Security and Network Management 3 years ago

Hi j-tagesson,I'm assuming that since you are "allowed" to create an internal network z.z.z.z (...

art-barrera commented on Requirements for VLAN select feature in 5508 WLC in Security and Network Management 3 years ago

Thx L - as usual, I need to read before speaking Interesting topic though.  I would assume that the...

art-barrera commented on Requirements for VLAN select feature in 5508 WLC in Security and Network Management 3 years ago

I'm not sure about the memory requirements and the affects of not meeting them; however, I would...

art-barrera commented on Radio Policy 802.11g only vs 802.11b/g only in Getting Started with Wireless 3 years ago

Wow!!  This was about a phone?   Holiday cocktails and Cisco Support Community don't mix...

art-barrera commented on Radio Policy 802.11g only vs 802.11b/g only in Getting Started with Wireless 3 years ago

So let me start by apologizing for not "getting" what you're saying because I see a few different...

art-barrera commented on Radio Policy 802.11g only vs 802.11b/g only in Getting Started with Wireless 3 years ago

Cool - I'd like to see one of your captures with the WLAN Radio Policy set to 802.11g only.  Can...

art-barrera commented on WiSM2 7.4 and WCS in Other Wireless - Mobility Subjects 3 years ago

Understood - thanks leo. Screenshot below of what I was talking about with regard to 1.3.Priority...

art-barrera commented on Radio Policy 802.11g only vs 802.11b/g only in Getting Started with Wireless 3 years ago

I digress but the word "policy" apears in MANY places in the controller config........anyway.The...

art-barrera commented on WLC Up But will not Respond in Getting Started with Wireless 3 years ago

Hi cbellinger-Console Port - just like the guys have said.  Not much to contribute to that not...

art-barrera commented on How to export the guest user accounts on the WLC5508? in Getting Started with Wireless 3 years ago

Hi Robert - from the Main WCS dashboard, select the Configure command, then controllers.  You will...

art-barrera commented on WLC 2504, Multicast Stub & Apple TV in Getting Started with Wireless 3 years ago

Cool - just curious.....who was the carrier with the MPLS offering? I know a couple of the big ones...

art-barrera commented on WiSM2 7.4 and WCS in Other Wireless - Mobility Subjects 3 years ago

Hey Leo - what happened to PI 1.3 mentioned at the top of the Download Page after selecting 7.4.100...

art-barrera commented on Problems with macbooks/air , vWLC+AP2602I in Security and Network Management 3 years ago

Hi azore2007 - I hate to be the pessimist but I think you're getting further away from resolving...

art-barrera commented on Problems with macbooks/air , vWLC+AP2602I in Security and Network Management 3 years ago

Were the MacBook's that were having problems running Mountain Lion (10.8.2)? There was a keychain...

art-barrera commented on Wireless Bridging in Security and Network Management 3 years ago

Hi George - would you still recommend that if you only had a single MAP scenario?  It's just so...

art-barrera commented on problem with configuring 40mhz width channel on Aironet 1141 in Getting Started with Wireless 3 years ago

I'm new to this community but I have a new "love for Mr. leo //art

art-barrera commented on problem with configuring 40mhz width channel on Aironet 1141 in Getting Started with Wireless 3 years ago

Good catch leo....actually, VERY important catch!First, understand that 802.11n supports both 2....

art-barrera commented on Site Survey Hardware - Looking for Recommendations/Opinions in Other Wireless - Mobility Subjects 3 years ago

Tried them all over a number of surveys.  Sometimes comparing both outputs over the same survey...

art-barrera commented on 2504 controller died in Getting Started with Wireless 3 years ago

Thx.  BTW, did you upgrade a 2504 to 7.4?  If so, I assume no issues with the 1.8 FUS for that...

art-barrera commented on 2504 controller died in Getting Started with Wireless 3 years ago

Just to close the loop.  Called TAC and they issued RMA today.Hate not knowing root cause but...

art-barrera commented on problem with configuring 40mhz width channel on Aironet 1141 in Getting Started with Wireless 3 years ago

Please change the encryption used to AES. Here is more information: http://www.cisco.com/en/US/...

art-barrera commented on WLC 7.4 release date? in Security and Network Management 3 years ago

Woohoo!!  Perfect timing as I can use the Holidays / downtime to mess around in the lab with it....

art-barrera commented on 2504 controller died in Getting Started with Wireless 3 years ago

Weird ... File name I used was different. Name was AIR-CT2504-K9-7. Etc.....Different than what I...

art-barrera commented on 2504 controller died in Getting Started with Wireless 3 years ago

Thanks! I've done many up and down on different platforms and I would have bet a paycheck on...

art-barrera commented on Apple TV over Wireless in Other Wireless - Mobility Subjects 3 years ago

What mode are the ap's set to?//artSent from Cisco Technical Support iPhone App

art-barrera commented on 5508 WLC Upgrade from 7.0.116 to 7.2.111.3 in Other Wireless - Mobility Subjects 3 years ago

I would believe that windows 8 clients and windows 8 wireless NIC drivers not connecting has to do...

art-barrera commented on WCS and WLC WLAN Config not fully in sync in Security and Network Management 3 years ago

Also make sure you are doing a template based audit and not just a basic.//artSent from Cisco...

art-barrera commented on WCS and WLC WLAN Config not fully in sync in Security and Network Management 3 years ago

Have you first created the security server on WCS and then apply to controller. Then apply your WCS...

Bio












art-barrera's Stats

Points37
Discussion started 6
Answers marked as Correct 4
Endorsed 0
Content Rated 3