ashleyreed4218

Member Since: Jul 26, 2012

English
ashleyreed4218 commented on IPsec Security Associations in LAN, Switching and Routing 3 years ago

Thank you for your response, Mohammad. They continue to be created, is that normal behavior? Also,...

ashleyreed4218 commented on Spanning-Tree : MST & PVST in LAN, Switching and Routing 3 years ago

Thank you, Peter.

ashleyreed4218 commented on ip ospf flood-list in LAN, Switching and Routing 3 years ago

Thanks, but do you have any input on how to find the other router with that router ID? I tried to...

ashleyreed4218 commented on Duplicate IP addresses on my network? in LAN, Switching and Routing 3 years ago

You can help find the offender? How? I know what the offender IP address is, but I can't find it....

ashleyreed4218 commented on Duplicate IP addresses on my network? in LAN, Switching and Routing 3 years ago

Gregory:It's just a small network with 2 servers, 2 switches and a router. The switches are layer 3...

ashleyreed4218 commented on %HSRP-4-BADAUTH in LAN, Switching and Routing 3 years ago

Thank you, the error is gone and now I have: %HSRP-5-STATECHANGE: Vlan30 Grp 30 state Speak ->...

ashleyreed4218 commented on %HSRP-4-BADAUTH in LAN, Switching and Routing 3 years ago

Thank you,But do I need to have authentication on both switches? 

ashleyreed4218 commented on %HSRP-4-BADAUTH in LAN, Switching and Routing 3 years ago

Thanks John:How can I change the authentication? (Sorry I have never really worked with HSRP)Here...

ashleyreed4218 commented on Banner MOTD Banner Exec Banner Login in LAN, Switching and Routing 3 years ago

I was using a Cisco 3560 in Packet Tracer - I think my problem is Packet Tracer. Because, when I...

ashleyreed4218 commented on Banner MOTD Banner Exec Banner Login in LAN, Switching and Routing 3 years ago

Thanks, yes I am asking how to do it. When I try to do banner exec nothing happens?

ashleyreed4218 commented on Enable Mode (Cisco 2911) in LAN, Switching and Routing 3 years ago

Thank you!

ashleyreed4218 commented on Unused ports - how to protect my stuff in LAN, Switching and Routing 3 years ago

Thank you everyone. I guess it is unfortunate that I can't really stop someone from getting in with...

ashleyreed4218 commented on Multicast Routing Pim-Sparse-Mode in LAN, Switching and Routing 3 years ago

Thank You John,I tried to go into global:ROUTER1(config)#ip pim sparse ?It wont let me issue the...

ashleyreed4218 commented on Failed ping test in LAN, Switching and Routing 3 years ago

Thank you,I have tried to set the speed and duplex to auto. The cables have been examined and they...

ashleyreed4218 commented on Half vs FULL Duplex in LAN, Switching and Routing 3 years ago

Hi,I am trying to get into the WAN side. I have yet to determine things on our end, since I am in...

ashleyreed4218 commented on OSPF - duplicate router ID in LAN, Switching and Routing 4 years ago

Thanks John and Kyle.But if I clear the ospf process is it going to cancel all ospf in my area? As...

ashleyreed4218 commented on 4/port Serial Async/Sync (HWIC 4 A/S) in LAN, Switching and Routing 4 years ago

I take it back what I said, the other router has 12.4 IOS, so it is the IOS12.3 and the hwic?

ashleyreed4218 commented on 4/port Serial Async/Sync (HWIC 4 A/S) in LAN, Switching and Routing 4 years ago

But check this out, I put the card in another 2811 I have, and I think it is the same IOS, it reads...

ashleyreed4218 commented on 4/port Serial Async/Sync (HWIC 4 A/S) in LAN, Switching and Routing 4 years ago

Yea, same issue:Router#sh diagSlot 0:        C2811 Motherboard with 2FE and integrated VPN Port...

ashleyreed4218 commented on 4/port Serial Async/Sync (HWIC 4 A/S) in LAN, Switching and Routing 4 years ago

Thanks Alessio:Router#sh diagSlot 0:        C2811 Motherboard with 2FE and integrated VPN Port ad...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Hi Rick,I was finally able to ping. You were correct. The issue was that I was using HDLC on my...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Alright. I will go back and re-configure the other device for ppp as well as the 2911. For the...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Router#show controllers serial 0/0/0:23Interface Serial0/0/0:23Hardware is HDLC32HDLC32 resource...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Rick,Thank you for this. I still cannot ping. I am not sure how to correctly use the show cdp...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

I was able to get in and configure the interfaces, but now I cannot ping :-(

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Rick, Here is the config from yesterday:Router(config)#controller ?T1  T1 controllerRouter(config)#...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Rick,I was able to issue the card type command. I'm kind of  blurry on understanding the Serial...

ashleyreed4218 commented on VWIC3 - 4MFT-T1/E1 in LAN, Switching and Routing 4 years ago

Alright, I'll try that. Thank you.Cheers

Bio












ashleyreed4218's Stats

Points0
Discussion started 37
Answers marked as Correct 0
Endorsed 0
Content Rated 30