battanc

Member Since: Jul 22, 2002

English
battanc commented on WLC DCA 2,4 GHz in Other Wireless - Mobility Subjects 4 months ago

Hi, I don't remember the default (channel 1,6, 11 ?). So you suggest not to enable all channels, so...

battanc commented on ASA CX failover in Firewalling 2 years ago

Thanks for the answer.I find this choice of Cisco really mad.I understand that Cisco wants to "...

battanc commented on ASA-CX management in Security Management 2 years ago

It works.I just add a static route in the INSIDE, for the <IP-PRSM> routing to the "inside...

battanc commented on ASA-CX management in Security Management 2 years ago

I have management on a separate VLAN and I have configured management and CX on the same VLAN, on...

battanc commented on ASA-CX management in Security Management 2 years ago

OK, now it's much clearer. But a few more questions:1. PRSM is only accessible from one interface (...

battanc commented on ASA-CX management in Security Management 2 years ago

Thank's Marvin.Let me stay on the first solution, which is the right one for me in this situation. ...

battanc commented on AnyConnect with LDAP-S in VPN 2 years ago

However, this does NOT answer my question, that maybe it was not very clear.The question is: can I...

battanc commented on Switch 6500 VSS in LAN, Switching and Routing 2 years ago

Some questions, but not the mail question: is there an upgrade for the 720-3B or my client must...

battanc commented on UCS Fabric Interconnect in Unified Computing 2 years ago

You are right: I talk about 10 G copperMy client has two Nexus 2232 with RJ45 ports (10G-base-T),...

battanc commented on AnyConnect on Android mobile in VPN 2 years ago

Obviously the mobile license is installed - without licence the message I have received is other.I...

battanc commented on Wireless controller for Branches in Getting Started with Wireless 2 years ago

Thanks,The Aironet 1600 Series do support H-REAP ?About the controller: mostly of the lines are...

battanc commented on Wireless controller for Branches in Getting Started with Wireless 2 years ago

Thanks for solution.Two more questions:- Do Aironet 600 Series support H-REAP ?- Do the Virtual...

battanc commented on L2L-VPN with inbound NAT in VPN 2 years ago

OK, thanks for the solution - it looks like a well working one .Now I just have to convince the...

battanc commented on L2L-VPN with inbound NAT in VPN 2 years ago

It will be a brand new one (9.1.x).Now there is a Zywall I want to replace

battanc commented on Manage ASA from remote in Security Management 2 years ago

Several versions, from 7.0.8 to 8.4.2, someone already with ASDM (and here is it easy to upgrade).I...

battanc commented on WLC - block MAC Address in Security and Network Management 3 years ago

But also with the block, I keep getting reports of "Signature attack detected"And the client get...

battanc commented on VPN IPsec with NAT in VPN 3 years ago

Very helpfulSolved, Thanks a lotClaudio

battanc commented on ASA-5500 with double NAT in Firewalling 3 years ago

Hi,The ASA is running 8.4.4.1The purpose for the "double" NAT is to have TWO ways for access to...

battanc commented on ASA-5500 with double NAT in Firewalling 3 years ago

I had already thought of such a thingAnd if it was so easy I did not need to ask the forum ......

battanc commented on VPN failover and balancing in VPN 4 years ago

Do you have some example of configuration?

battanc commented on VPN failover and balancing in VPN 4 years ago

But doing so, only Site-B has high-availability (using two interfaces, based on different provider...

battanc commented on VPN failover and balancing in VPN 4 years ago

OK, suppose in Site-A I configure 2 different remote peer (only by CLI, right?)What about the...

battanc commented on ASA5510 standy by failover in Firewalling 4 years ago

You can have the connection or direct or though a switch - I have succesfully tested both the...

battanc commented on ASA5510 standy by failover in Firewalling 4 years ago

why waste two interfaces, when you can have the same statefull failover with only ONE interface,...

battanc commented on LAN Bridging in LAN, Switching and Routing 5 years ago

In the "main" office I need only one IP class, this is the problem.I have to NAT - on the Router in...

battanc commented on LAN Bridging in LAN, Switching and Routing 5 years ago

Paolo, of course I can ...But for my custom this is a BIG trouble, so he prefer not to change.I...

battanc commented on ASA-5510 - how to block p2p & IM in Firewalling 5 years ago

Thank'sI have just read the upper part of the document ...

battanc commented on ASA-5510 - how to block p2p & IM in Firewalling 5 years ago

I already know this document, but - as I wrote 2 posts before - it don't work with 8.4 (http-map is...

battanc commented on ASA-5510 - how to block p2p & IM in Firewalling 5 years ago

Some news?I find some suggestion:http-map inbound_http content-length min...

battanc commented on Lightweight access point - cold reset in Security and Network Management 6 years ago

Starting with 5.2.x, You can not enable Telnet nor SSH.I can perform Reset from the WLC, but I am...

battanc commented on VPN with NAT on PIX in VPN 6 years ago

I allready know this document.But in the example a STATIC NAT is been used for the whole LAN 1:1I...

battanc commented on VLAN connection in LAN, Switching and Routing 7 years ago

1) So there is no ISP between.>> Right - NO VPN, there are only DIRECT leased line2) What...

battanc commented on 857 remote management in WAN, Routing and Switching 10 years ago

I try Telnet, SSH and SDM - allways NO access.

battanc commented on ISDN on 1841 in WAN, Routing and Switching 10 years ago

!interface BRI0/0/0 description linea ISDN no ip address encapsulation ppp no ip route-cache cef no...

battanc commented on PIX Site to Site VPN with ISDN Backup Dial? in Other Security Subjects 10 years ago

One more question from me: while main line down (VPN via ISDN) the ISDN line is allways UP,...

battanc commented on VPN PIX-857 in Other Security Subjects 11 years ago

Right! For this new location, I wish to use ONLY the 857, without PIX.Problems?

battanc commented on Privileged/limited access in Network Management 11 years ago

This is OK, but how to limit the access to only some configuration commands?I have to give avvess...

battanc commented on Catalyst 2950 in Other Network Infrastructure Subjects 11 years ago

OK about Multicast.Do I realy need Spanning-Tree in my network?I don't have duplicate connection...

battanc commented on DHCP problems with 1720 in Other Network Infrastructure Subjects 14 years ago

1) Why do I need to use NAT? When in a "closed" network, without connection to InterNet, I usually...

battanc commented on DHCP problems with 1720 in Other Network Infrastructure Subjects 14 years ago

!version 12.1no service single-slot-reload-enableno service padservice timestamps debug...

battanc commented on DHCP problems with 1720 in Other Network Infrastructure Subjects 14 years ago

OBVIOUSLY I use IP Helper-address on the LAN interface (FastEthernet) ...I used the same...

Bio












battanc's Stats

Points0
Discussion started 71
Answers marked as Correct 0
Endorsed 0
Content Rated 23