Brendan Marmont

Member Since: Nov 24, 2009

English
Brendan Marmont commented on AP2802L-Z-K9 APs power requirement + 3650 in Security and Network Management 6 days ago

Ended up enabling LLDP on 3650 - Radio came UP! LLDP run Thanks Leo for your time

Brendan Marmont commented on AP2802L-Z-K9 APs power requirement + 3650 in Security and Network Management 3 weeks ago

Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ----* 1 28 WS-...

Brendan Marmont commented on AP2802L-Z-K9 APs power requirement + 3650 in Security and Network Management 3 weeks ago

We are able to connect AP into Cisco 4507 successfully. Power consumption is 26W and class 4. 3650...

Brendan Marmont commented on AP2802L-Z-K9 APs power requirement + 3650 in Security and Network Management 3 weeks ago

The input power requirements for the AP are as below. -  802.3at PoE+, Cisco...

Brendan Marmont commented on AP2802L-Z-K9 APs power requirement + 3650 in Security and Network Management 3 weeks ago

Module Available Used Remaining (Watts) (Watts) (Watts)------ --------- -------- ---------1 390.0...

Brendan Marmont commented on [TCP Out-of-Order] and [TCP Dup ACK] - Whats going on??? in WAN, Routing and Switching 9 months ago

Plot thickens... When switching local subnets on the same machine the circuit to performs as...

Brendan Marmont commented on [TCP Out-of-Order] and [TCP Dup ACK] - Whats going on??? in WAN, Routing and Switching 10 months ago

Thanks Richard, checked other site config for flow control, they are all cookie cut. There are no...

Brendan Marmont commented on [TCP Out-of-Order] and [TCP Dup ACK] - Whats going on??? in WAN, Routing and Switching 10 months ago

Each site has 500M Ethernet connection, DC site 2GB. MPLS I can see drop on the input queue 68878...

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

It reeks of WAN ** WAN provider has said there is no issue they can see. ** Added diagram ** I...

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

Local site, server to server, server to workstation. Connected directly to 4507.

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

An example of same segment test local to affected site

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

NID - Network Interface Device (That's what our provider calls them) Alcatel 7210 SAS-T I'll...

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

UDP to other site has huge packet failure C:\Iperf>iperf -c x.x.8.101 -u -d -b 500m...

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

HP Laptops connected directly into 4507 core. So Laptop - Core - NID --> NID - Core - Laptop...

Brendan Marmont commented on Degraded service - 1 Direction (Not the band) in Small Business Switches 10 months ago

Checked end to end, no Duplex mismatch. Tests show affect is only egress to one site. Other remote...

Brendan Marmont commented on WAP551 DHCP issue in Small Business Wireless 1 year ago

Looks like we could enable bridged mode on the WAP561, clients access the same subnets as the local...

Brendan Marmont commented on WAP551 DHCP issue in Small Business Wireless 1 year ago

Thanks Eric, max 10 users, purpose to allow smartphone/tablets access to internet. We have a local...

Brendan Marmont commented on WAP551 DHCP issue in Small Business Wireless 1 year ago

Hello Eric, I was looking at putting a WAP551 into a remote office, they are connected to our...

Brendan Marmont commented on 3560 4507 MTU in LAN, Switching and Routing 1 year ago

Thanks for your reply. If I enable 'system mtu jumbo 9000' on the 3560G, all GB interfaces globally...

Brendan Marmont commented on 3560 switch support with BGP and OSPF in LAN, Switching and Routing 1 year ago

Do we require a SAL to utilise advanced routing features? ThanksBrendan

Brendan Marmont commented on AP unable to find controller when using Power Injector in LAN, Switching and Routing 1 year ago

Interface Speed Local pair Pair length        Remote pair Pair status...

Brendan Marmont commented on AP unable to find controller when using Power Injector in LAN, Switching and Routing 1 year ago

Yes it is "WS-C3560G-48TS" The original switch was a "WS-C3560V2-48PS" I am simply taking the feed...

Brendan Marmont commented on Wireless clients re-association disconnects in Other Wireless - Mobility Subjects 2 years ago

Thanks Leo, I had a quick read through the revision notes, there is nothing there that points to...

Brendan Marmont commented on Getting disconnected randomly (5508 controller, 3300 series LAPs) in Security and Network Management 2 years ago

Did you ever get a resolution for this, we are having the same issue? ThanksBrendan

Brendan Marmont commented on Switch management access in LAN, Switching and Routing 2 years ago

Should read 10.10.60.1 is the core switch, directly connected by trunk      10.0.0.0/24 is...

Brendan Marmont commented on Switch management access in LAN, Switching and Routing 2 years ago

Thanks Paul, L3 and both default-gateway and ip routing enabled ip default-gateway 10.150.60.1 ...

Brendan Marmont commented on NCS appliance upgrade 1.1.1.24 - 1.3 in Getting Started with Wireless 3 years ago

I tried that prior to getting the reference to https://supportforums.cisco.com/docs/DOC-26972It...

Brendan Marmont commented on NCS appliance upgrade 1.1.1.24 - 1.3 in Getting Started with Wireless 3 years ago

Thanks that link was helpfull, I now get another error regarding the install failing due to...

Brendan Marmont commented on Flowcontrol - Throughput issues in LAN, Switching and Routing 3 years ago

I've tried a MTU 9000 and the throughput still performs like a 10MB link.Thanks

Brendan Marmont commented on Wireless guest accounts - how many concurrent sessions per account? in Getting Started with Wireless 3 years ago

Problem is we create a guest account for a group to use, first couple of users can login fine,...

Brendan Marmont commented on Wireless guest accounts - how many concurrent sessions per account? in Getting Started with Wireless 3 years ago

I expect them to login, we have a webpage that the client is redirected to, they enter the guest...

Brendan Marmont commented on Wireless guest accounts - how many concurrent sessions per account? in Getting Started with Wireless 3 years ago

Sorry can you elaborate on how we do this? How does the AD account link to the WLC guest account?...

Brendan Marmont commented on Wireless guest accounts - how many concurrent sessions per account? in Getting Started with Wireless 3 years ago

Attached now... It was in the posted reply content

Brendan Marmont commented on Wireless guest accounts - how many concurrent sessions per account? in Getting Started with Wireless 3 years ago

Thanks Scott, the maximum is set to 0. When the client trys to connect we get the screen...

Brendan Marmont commented on Cisco UC Virtualised Apps - Attendant console in IP Telephony 4 years ago

ARC is not accepting registrations just at the minute, but thanks for your suggestion, I will try...

Brendan Marmont commented on %C4K_RKNOVA-4-INVALIDTOKENEXPIRED in LAN, Switching and Routing 4 years ago

Hi, I have the same entry appearing in my logs, did you find a resolution for this topic?Cheers,...

Brendan Marmont commented on InvalidTokenExpired - Help in LAN, Switching and Routing 4 years ago

Thanks... Version 03.02.00.XO

Brendan Marmont commented on InvalidTokenExpired - Help in LAN, Switching and Routing 4 years ago

Thanks Nikolay,WCCP is not enabled.cat4500e-UNIVERSALK9-M 1    48  10/100/1000BaseT UPOE E Series...

Brendan Marmont commented on Cisco Soft phone traffic path in IP Telephony 4 years ago

Chris, what does SCCP port TCP 2000 do as a description for our rule? We don't use SIP from this...

Brendan Marmont commented on Cisco Soft phone traffic path in IP Telephony 4 years ago

Thanks guys thats what I was after! I will add the ports mentioned and see how we go.

Brendan Marmont commented on Max EAPOL-key M5 retransmissions exceeded for client in Other Wireless - Mobility Subjects 4 years ago

As I am the only one making configuration changes I am a tad miffed as why it's all gone to custard...

Brendan Marmont commented on 4507R+E command query in WAN, Routing and Switching 4 years ago

Thanks Vivek, SUP 7, I take it from your comment the 7 will not supprt the command either. There...

Brendan Marmont commented on Priming APs connection failure in Getting Started with Wireless 4 years ago

I have found the problem, there was an AP policy setup, all I needed to do was add the MAC to the...

Brendan Marmont commented on Priming APs connection failure in Getting Started with Wireless 4 years ago

I set the timezone and it has not helped. I've tried to download the latest IOS for the 3500s but...

Brendan Marmont commented on Priming APs connection failure in Getting Started with Wireless 4 years ago

Pings are sucessfull.AP70ca.9b6b.4f51#sh capwap ip configLWAPP Static IP ConfigurationIP Address...

Brendan Marmont commented on Priming APs connection failure in Getting Started with Wireless 4 years ago

Thanks for the replies, I can plug another AP and it configures up fine.Tried to reset the...

Brendan Marmont commented on Priming APs connection failure in Getting Started with Wireless 4 years ago

Better correct what I said... There are 4 interfaces are in one port channel.LWAPP image version 7....

Brendan Marmont commented on Priming APs connection failure in Getting Started with Wireless 4 years ago

Sorry, there are 4 ports in a channel on the WLC. AP: 3502iCode on WLC, what exactly do you...

Bio












Brendan Marmont's Stats

Points0
Discussion started 53
Answers marked as Correct 0
Endorsed 0
Content Rated 22