Brad Martin

Member Since: Nov 20, 2006

English
Brad Martin's Activity on Cisco Support Community
Currently displaying 50 results

Brad Martin has commented on Trunk Configuration

6 days 21 hours ago
When we built our trunk between Callmanager and Lync, the Lync side didn't...

Brad Martin has created Sip address in Callmanager directory

6 days 21 hours ago
Running Callmanager version 10.5.2. Trying to enter our video endpoints (...

Brad Martin has commented on 3850x VLAN Switch Port Active but no MAC or IP Address

2 weeks 1 day ago
What version are you running. We are running 3.3.5 and are seeing similar...

Brad Martin has commented on Cisco 8861 - Packet loss from PC port

1 month 4 weeks ago
Thanks. We disabled the wi-fi on the phones and it helped for a while, but...

Brad Martin has commented on Cisco 8861 - Packet loss from PC port

2 months 2 days ago
They experience total loss of connection.

Brad Martin has commented on Cisco 8861 - Packet loss from PC port

2 months 2 days ago
All set to auto negotiate. No errors showing on switch interface. 

Brad Martin has created Cisco 8861 - Packet loss from PC port

2 months 2 days ago
We've recently started installing Cisco 8861 phones (UCM version 10.5.2)...

Brad Martin has commented on Trace collection question

3 months 1 week ago
Thank you all for your input. All very helpful. I was able to get exactly the...

Brad Martin has commented on Trace collection question

3 months 1 week ago
I'm trying to prove that I'm sending calling number caller-id to our...

Brad Martin has created Trace collection question

3 months 1 week ago
We are running callmanager v10.5.2 that has a sip trunk to VPI recording system...

Brad Martin has created Verint recording failing on new sip phones

3 months 3 weeks ago
We are using old-school Verint recording system (uses CiscoTSP.exe client on...

Brad Martin has commented on ELM to PLM upgrade

4 months 6 days ago
I'm talking about Unity Connections and not Contact Center Express. I...

Brad Martin has created ELM to PLM upgrade

4 months 1 week ago
Planning on upgrading CUCM, CUCX & CIMP v. 9.1.2 to 10.5.2. I've read...

Brad Martin has commented on Cisco 8861 corporate directory issue

4 months 1 week ago
We have found that it is the format of the phone number (synced from active...

Brad Martin has created LDAP integration question

4 months 1 week ago
Running v9.1.2 callmanager. Currently using active directory syncronization. Is...

Brad Martin has commented on Cisco 8861 corporate directory issue

4 months 1 week ago
No. Only when using the corporate directory. All other dialing (keypad, speed...

Brad Martin has created Cisco 8861 corporate directory issue

4 months 2 weeks ago
Just started using some 8861 phones with Callmanager 9.1.2. Installed cmterm-...

Brad Martin has commented on Cisco Prime Collaboration Provisioning ldap error

4 months 2 weeks ago
I used the distinguished name format. (Actually tried both). I also had...

Brad Martin has created Cisco Prime Collaboration Provisioning ldap error

4 months 2 weeks ago
Running Cisco Prime Collaboration Provisioning standard (v10.6). Trying to...

Brad Martin has commented on Deleting old callmanager certs

5 months 1 week ago
Thanks for the reply. Both services were stopped on all four callmanagers...

Brad Martin has created Deleting old callmanager certs

5 months 1 week ago
Running callmanager version 9.1.2.10000-28 with one pub and three subs. There...

Brad Martin has commented on CWMS inactive users suddenly

5 months 4 weeks ago
I think the certificate is still valid as active users can access system. What...

Brad Martin has commented on CWMS inactive users suddenly

6 months 3 days ago
Same behavior after upgrade.

Brad Martin has commented on CWMS inactive users suddenly

6 months 4 days ago
Yes. That is what I am seeing. I updated to version 2.5.1.132.B-AE yesterday....

Brad Martin has commented on CWMS inactive users suddenly

6 months 2 weeks ago
A manuel resync (version 2.5) with no changes to users on CCM end user page...

Brad Martin has commented on CWMS inactive users suddenly

6 months 2 weeks ago
I am running version 2.5.1.29.B-AE with CUCM LDAP integration (no filter groups...

Brad Martin has created Finding Line Expansion Module in use

6 months 3 weeks ago
Does anyone know how to find working Line Expansion Module's (7914, 7916)?...

Brad Martin has commented on Release notes for CWMS MR5

8 months 2 weeks ago
Applyed 2.0 MR5 for bash vulnerability and now showing vulnerable for POODLE...

Brad Martin has created Release notes for CWMS MR5

8 months 3 weeks ago
Has anyone seen the release notes for MR5? Want to make sure it has the bash...

Brad Martin has created Cisco 819 4g lte problem

9 months 1 week ago
I have a Cisco 819 4g lte router that worked great before we had is...

Brad Martin has commented on 911 call went out secondary MGCP gateway

9 months 1 week ago
Did you check distribution algorithm on the route group? Top Down vs. Circular.

Brad Martin has commented on Cisco 3850 bundle mode

10 months 3 days ago
Thanks for the info. I will try it when I am on-site next week.

Brad Martin has commented on Cisco 3850 bundle mode

10 months 1 week ago
Ran this command with this result.software expand running to flash-6:% Failed...

Brad Martin has commented on Cisco 2821, add 8 FXO

10 months 1 week ago
Two VWIC2-4FXO cards.

Brad Martin has commented on Cisco 3850 bundle mode

10 months 1 week ago
The "software auto-upgrade" command says no switches are running...

Brad Martin has created Cisco 3850 bundle mode

10 months 1 week ago
I have a stack of six 3850 switches. One is in BUNDLE mode and the others are...

Brad Martin has commented on Cisco 2821, add 8 FXO

10 months 1 week ago
It is possible if you have enough dsp resources. You can calculate hardware...

Brad Martin has commented on CUCM 9.1.2 isolate administration and voice services

10 months 1 week ago
I don't think CUCM can be configured that way. One of the best practice...

Brad Martin has commented on CWMS Upgrade - 1.1 to 2.0

11 months 2 weeks ago
I had to do add disk to upgrade CWMS using Cisco UCS-C220-M3 servers and was...

Brad Martin has created CWMS ldap users disabled

11 months 2 weeks ago
After the weekly ldap sync with Callmanager, all users have been set inactive...

Brad Martin has commented on Cisco 2911 VIC2-FXO card is not comming up (No lights) even when i connect the line to it!!

1 year 1 week ago
Check to see if you have the voice license bundle for the router.show...

Brad Martin has commented on Managing vty ACLs with Prime Infrastructure?

1 year 3 weeks ago
I am also interested in this topic. We have vty ACLs in place but with...

Brad Martin has commented on Managing vty ACLs with Prime Infrastructure?

1 year 3 weeks ago
I am also interested in this topic. We have vty ACLs in place but with...

Brad Martin has commented on CWMS upgrade from 1.5 to 2.0 error

1 year 2 months ago
Thanks for the replies. I will wait to hear from the UCS group and hopefully...

Brad Martin has commented on CWMS upgrade from 1.5 to 2.0 error

1 year 2 months ago
Thanks for the replies. I will wait to hear from the UCS group and hopefully...

Brad Martin has commented on CWMS upgrade from 1.5 to 2.0 error

1 year 2 months ago
No snapshots on that server. I've also posted a question in Unified...

Brad Martin has commented on CWMS upgrade from 1.5 to 2.0 error

1 year 2 months ago
No snapshots on that server. I've also posted a question in Unified...

Brad Martin has commented on CWMS upgrade from 1.5 to 2.0 error

1 year 2 months ago
I have a 250 user CWMS setup with Admin & Media on one UCS C220-M3 (four...

Brad Martin has commented on CWMS upgrade from 1.5 to 2.0 error

1 year 2 months ago
I have a 250 user CWMS setup with Admin & Media on one UCS C220-M3 (four...

Brad Martin has created Add/Remove HDD from Raid5 array with UCS C220-M3

1 year 2 months ago
I have two UCS C220-M3 stand alone servers each with 4 500GB drives configured...

Bio












Brad Martin's Stats

Points106
Discussion started 32
Answers marked as Correct 11
Endorsed 1
Content Rated 26