branfarm1

Member Since: Feb 09, 2005

English
branfarm1 commented on ASDM and Windows 10 - Display issues in Firewalling 1 month ago

I've run into this issue in the past when I switch my laptop from external monitors to the built-in...

branfarm1 commented on Nexus Data Broker (NDB) Configuration in Other Data Center Subjects 9 months ago

Thanks, Kevin - that's helpful to know.

branfarm1 commented on Nexus Data Broker (NDB) Configuration in Other Data Center Subjects 9 months ago

Well I gave that a try but still no luck.  I'll have to open a case and see what happens. Thanks...

branfarm1 commented on Nexus Data Broker (NDB) Configuration in Other Data Center Subjects 9 months ago

What version are you on?  I'm on 2.2 and it looks like they've added that drop rule by default now...

branfarm1 commented on Nexus Data Broker (NDB) Configuration in Other Data Center Subjects 9 months ago

Thanks, Charles.  I was missing a couple of key elements so I'm a little further a long now. Did...

branfarm1 commented on Nexus Data Broker (NDB) Configuration in Other Data Center Subjects 9 months ago

Any luck on this?  I'm just getting started with NDB and am also running into problems. The...

branfarm1 commented on NX-OS - OSPF route filtering by route-map deny "match tag" failing to match inbound routes in WAN, Routing and Switching 1 year ago

Yeah, you're right -- distribute lists are not supported in NX-OS. I didn't realize that. This page...

branfarm1 commented on NX-OS - OSPF route filtering by route-map deny "match tag" failing to match inbound routes in WAN, Routing and Switching 1 year ago

With the MPLS network in the middle, your Branch and HQ are effectively in two separate OSPF...

branfarm1 commented on Monitoring tool for our external public IP address in WAN, Routing and Switching 1 year ago

There are a lot of options out there, depending on what functions you're looking for.  Over the...

branfarm1 commented on MAC address flapping in and out of MAC table on 3750X stack in LAN, Switching and Routing 1 year ago

Just wanted to provide an update --  I opened up a case with TAC and worked with an engineer to try...

branfarm1 commented on MAC address flapping in and out of MAC table on 3750X stack in LAN, Switching and Routing 1 year ago

That's not necessarily true -- It covers about 8 hours of time and while the log only contains SSH...

branfarm1 commented on MAC address flapping in and out of MAC table on 3750X stack in LAN, Switching and Routing 1 year ago

Here are the requested outputs. This is a stack of four 3750X, connected to a pair of 4500-X in VSS.

branfarm1 commented on Removed Fex that are still showing up in startup-config. in LAN, Switching and Routing 2 years ago

Thanks for the update.  I figured it was cosmetic only, but like you said, the configuration...

branfarm1 commented on HSRP hardware limitation on catalyst 4500-X in LAN, Switching and Routing 2 years ago

Still 256 ---4500X-1(config-if)#standby ?  <0-255>         group number  authentication ...

branfarm1 commented on Removed Fex that are still showing up in startup-config. in LAN, Switching and Routing 2 years ago

Just curious if you ever got this issue resolved, or if a reboot solved your issue.  I'm having the...

branfarm1 commented on Cant set up Voicemail on Cisco Jabber Mac 8.6.6 in Jabber Clients 3 years ago

I'm seeing the same thing and I can't seem to find any information on this particular problem.   ...

branfarm1 commented on Changing voicemail server settings in Jabber Clients 3 years ago

On my PC Jabber clients, I have to manually set the voicemail server information, directing it to...

branfarm1 commented on VPN phone with incorrect time display in CM 9.1 in IP Telephony 3 years ago

We found the issue.The ASA address pool was not giving out TFTP addresses, so the phones did not...

branfarm1 commented on VPN phone with incorrect time display in CM 9.1 in IP Telephony 3 years ago

Actually, I took the VPN phone off the network, and now when I browse to the phone it doesn't list...

branfarm1 commented on VPN phone with incorrect time display in CM 9.1 in IP Telephony 3 years ago

I enabled web-access and browsed to the device, and it shows the correct time zone as specified in...

branfarm1 commented on VPN phone with incorrect time display in CM 9.1 in IP Telephony 3 years ago

Ah -- so you mean exactly what you mean   I tried browsing to the address before my last reply but...

branfarm1 commented on VPN phone with incorrect time display in CM 9.1 in IP Telephony 3 years ago

Thanks for the reply.   It's a SCCP phone, no mobility is configured. It's in the same DP as the...

branfarm1 commented on CME transfer SIP call to SCCP phone on same system in IP Telephony 4 years ago

Hi Alex,Thanks for the response.   I added the config you suggested, but I'm still seeing the same...

branfarm1 commented on 1GB port connectivity on a Cisco 4900M in LAN, Switching and Routing 4 years ago

Hi,Not to take away from Leolaohoo's response, but to clarify -- you can only use the TwinGig on...

branfarm1 commented on ERSPAN on Catalyst 6500 in LAN, Switching and Routing 4 years ago

Hi Steve,I was seeing this exact issue between a 5010 and 6500 this week -- I was seeing the...

branfarm1 commented on Dual ISP without BGP and a firewall in LAN, Switching and Routing 4 years ago

I think the only way you'll avoid doing NAT on the router itself is if you can use one of your /29...

branfarm1 commented on Redistribution routing loop not forming when it should.... in LAN, Switching and Routing 4 years ago

Hi Steven,Lets assume that both R1 and R2 have the RIP routes before you activate OSPF.   When you...

branfarm1 commented on Erspan causing high CPU on 6500 in LAN, Switching and Routing 4 years ago

Any ideas on this one?  Is it possible to do a normal rspan session from a Nexus over to a 6500?

branfarm1 commented on Layer3 Switch, or Router and unmanaged switches in LAN, Switching and Routing 4 years ago

Let me clarify my statement -- I didn't mean to suggest using unmanaged vs managed devices. I...

branfarm1 commented on IPAD 3 cannot VPN Calling on the Experts again. in LAN, Switching and Routing 4 years ago

Sorry -- I'm not trying to cloud the issue here. I'm sure you'll be able to get this working on...

branfarm1 commented on IPAD 3 cannot VPN Calling on the Experts again. in LAN, Switching and Routing 4 years ago

If you do decide to go with the ASA, dont forget that you'll need an extra license to support...

branfarm1 commented on PIM Joins not switching through catalyst 3560G in LAN, Switching and Routing 4 years ago

Hi There,PIM is a layer 3 function, so I dont think your 3560 would be interfering with it if its...

branfarm1 commented on Layer3 Switch, or Router and unmanaged switches in LAN, Switching and Routing 4 years ago

In my experience, the less devices you have to manage, the easier it is to run things.   So if a L3...

branfarm1 commented on CME international calls failing and using wrong dial-peer in IP Telephony 4 years ago

Hi Java,Thanks for the response.  So are you saying that the other end just isn't answering?  I...

branfarm1 commented on ACE rserver with weight 0 in Application Networking 4 years ago

Hi Ajay,Thanks for the response. That did the trick!  Thanks again!

branfarm1 commented on Understanding GSS proximity decisions in Application Networking 4 years ago

Maybe the better question is -- how many people are actually using proximity on their GSS?  Is...

branfarm1 commented on WCCP & Bluecoat bad rcv_id in LAN, Switching and Routing 4 years ago

Were you ever able to find a solution to this issue? I am seeing the same debug messages on a 4510...

branfarm1 commented on 7916 blue screen in IP Telephony 4 years ago

Hi guys,I'm having this exact issue with a 7975G + 7916 and I'm wondering if there are any other...

branfarm1 commented on 6500 booting into rommon in LAN, Switching and Routing 4 years ago

Well it seems like reformatting the sup-bootdisk did the trick.  I was hesitant to do this because...

branfarm1 commented on 6500 booting into rommon in LAN, Switching and Routing 4 years ago

Thanks for the replies:I definitely have space available:Directory of disk0:/    1  -rw-       ...

branfarm1 commented on ACE backup serverfarm failover question in Application Networking 4 years ago

Hi Marko,Unfortunately that didn't work either.   I just don't think this is going to be possible....

branfarm1 commented on ACE Module - RADIUS authentication against Microsoft NPS in Application Networking 4 years ago

Found this thread very helpful in diagnosing a similar Radius authentication issue with Microsoft...

branfarm1 commented on Cat6500 w/Sup-720 sup-bootdisk error in LAN, Switching and Routing 4 years ago

I was able to boot the device by bringing in another CF card with an image installed on it.  I did...

branfarm1 commented on Cat6500 w/Sup-720 sup-bootdisk error in LAN, Switching and Routing 4 years ago

Hi guys,While I do appreciate the responses, my issue is currently not resolved.  Although I was...

branfarm1 commented on Cat6500 w/Sup-720 sup-bootdisk error in LAN, Switching and Routing 4 years ago

Thanks for the replies. I tried reformatting the sup-bootdisk and that appeared to work -- I was...

branfarm1 commented on Cat6500 w/Sup-720 sup-bootdisk error in LAN, Switching and Routing 4 years ago

Hi,I haven't been able to run the MD5 verify on this particular device, but I did run it on another...

branfarm1 commented on remote connection closed - ssh in LAN, Switching and Routing 4 years ago

What size modulus are you using for your keys?  I recently ran into a problem with some 7201's...

branfarm1 commented on Port Blocking in LAN, Switching and Routing 4 years ago

Alain is right -- the default port-security is for 1 allowed MAC and shutdown on violation. But I...

branfarm1 commented on Port Blocking in LAN, Switching and Routing 4 years ago

You can set BPDUGuard on the global level or on a per port level.  Similarly, I believe you could...

branfarm1 commented on Port Blocking in LAN, Switching and Routing 4 years ago

I'm sure there are better answers out there, but two things that come to mind are BPDU guard and...

Bio

I studied Microbiology in college, where for 4 years my life were centered around studying the tiniest elements in cells and viruses. Naturally, I carried these interests out of college and directly into a career in networking. Actually, my interests have always centered around systems and how the complex interactions between various elements are manifest in the functions they seek to carry out. As in the life sciences, networking is about understanding the interactions between various systems, and controlling this behavior to allow optimal interaction.










branfarm1's Stats

Points179
Discussion started 105
Answers marked as Correct 14
Endorsed 0
Content Rated 89