bret

Member Since: Dec 02, 2004

English
bret's Activity on Cisco Support Community
Currently displaying 50 results

bret has created CIsco Prime New Floor Area Does Not Display

1 week 5 hours ago
Has anyone had an issue where they create a new floor area and it does not...

bret has commented on B22 to HP7000 Best Practice

1 month 2 weeks ago
Thanks for chiming in Mark. I had that portion figured out and configured...

bret has created B22 to HP7000 Best Practice

1 month 2 weeks ago
I currently have 4 - B22's in a HP7k. They are then connected back to 2 -...

bret has commented on BGP wont establish with peer using update-source Loopback0

2 months 1 day ago
So, I guess the update-source, isn't like a logging source-interface l0? As...

bret has commented on BGP wont establish with peer using update-source Loopback0

2 months 1 day ago
Thanks Bilal! So what your saying is if I am not peering with the loopback, the...

bret has commented on BGP wont establish with peer using update-source Loopback0

2 months 1 day ago
CE1#ping 192.168.107.3 source l0Type escape sequence to abort.Sending 5, 100-...

bret has commented on BGP wont establish with peer using update-source Loopback0

2 months 1 day ago
Good eye. I added the update-source loopback 0 to CE 2, not included in the...

bret has created BGP wont establish with peer using update-source Loopback0

2 months 1 day ago
I hope someone can steer me in the right direction. I am working on a BGP lab,...

bret has commented on ISE IOS CLI Authentication Quandry

3 months 1 week ago
Thanks for the reply Neno. I got it worked out and will be submitting a new...

bret has created ISE IOS CLI Authentication Quandry

3 months 1 week ago
Im trying to push the limits of ISE, since tacacs+ isnt supported yet. The goal...

bret has commented on Create new WLAN using PI 2.2

3 months 2 weeks ago
Go figure was missing a few radius attributes that prevented me from...

bret has commented on Create new WLAN using PI 2.2

3 months 2 weeks ago
Unfortunately Sandeep the Classic Theme has been deprecated.

bret has created Create new WLAN using PI 2.2

3 months 3 weeks ago
I recently upgraded to PI 2.2. Now where the heck do you create a new WLAN? I...

bret has commented on Wired Guest Using ISE Interface

4 months 2 weeks ago
Thanks Justin, but thats the problem. Both the foreign and anchor controller...

bret has created Wired Guest Using ISE Interface

4 months 2 weeks ago
Ive scoured the forums for a solution but struck out looking for design tips. I...

bret has commented on How do you Redistribution EIGRP into OSPF and maintain a distance of 250 for a static route?

4 months 2 weeks ago
Jon,Just wanted to drop a quick note saying I got this working after some...

bret has commented on How do you Redistribution EIGRP into OSPF and maintain a distance of 250 for a static route?

4 months 3 weeks ago
Yea, aint going the GRE route. Thanks for the help Jon. 

bret has commented on How do you Redistribution EIGRP into OSPF and maintain a distance of 250 for a static route?

4 months 3 weeks ago
So in the case of a /24. If it were say broken up into /25's? From our...

bret has created How do you Redistribution EIGRP into OSPF and maintain a distance of 250 for a static route?

4 months 3 weeks ago
Ok, I have scoured the forums long enough and have to post. The design is below...

bret has commented on PCoIP and WLAN

4 months 3 weeks ago
Problem fixed. We moved our data centers recently and the pcoip secure gateway...

bret has commented on PCoIP and WLAN

4 months 3 weeks ago
Thanks for chiming in Freerk.Yes there is network connectivity.Between the...

bret has created PCoIP and WLAN

4 months 3 weeks ago
We have MAC's which use VMware Horizon View. When they try connecting to a...

bret has commented on Tri-Bonded T1 taking errors slowly 3925

5 months 3 days ago
Were you able to resolve this problem? I have the same card and getting the...

bret has commented on IGMP Question

5 months 1 week ago
I added ip pim sparse-dense-mode and it did the trick.

bret has created IGMP Question

5 months 2 weeks ago
I have a 3750 running IPSERVICES 12.2(55)SE9. On this single switch I have 2...

bret has commented on VRF Between Routed Boundry

6 months 9 hours ago
Jon,Thanks for all your time. I have decided to scratch the VRF design in lieu...

bret has commented on VRF Between Routed Boundry

6 months 13 hours ago
Jon,Bgp is an option. However, if the sub interfaces are a requirement to work...

bret has commented on VRF Between Routed Boundry

6 months 15 hours ago
I would like to keep the VRF extended between the sites, so adding the routes...

bret has commented on VRF Between Routed Boundry

6 months 1 day ago
Thanks for taking the time John. The tunnel option was a thought but I never...

bret has commented on VRF Between Routed Boundry

6 months 1 day ago
Are the interfaces connecting the routers together also in the VRF ? No.Do you...

bret has created VRF Between Routed Boundry

6 months 1 day ago
I have to provide connectivity for a third party between two locations. I have...

bret has commented on 2602 lightweight AP losing config on reboot

1 year 3 weeks ago
Eric, I had this issue after converting an AAP to LWAP. Once the AP was joined...

bret has commented on Cant ping 1140 from different subnet

1 year 1 month ago
Upon further review of the AP it appears that 15.2 code enables ip routing be...

bret has commented on Cant ping 1140 from different subnet

1 year 1 month ago
Upon further review of the AP it appears that 15.2 code enables ip routing be...

bret has created Cant ping 1140 from different subnet

1 year 1 month ago
I am trouble shooting an AP someone installed. I found that when I tried...

bret has commented on Cisco WLC : AP automatic configuration for flexconnect parameters and ap group

1 year 3 months ago
To my knowledge these features are not available in 7.4, but from what I...

bret has commented on Cisco WLC : AP automatic configuration for flexconnect parameters and ap group

1 year 3 months ago
To my knowledge these features are not available in 7.4, but from what I...

bret has commented on ISE LDAP Password Change

1 year 3 months ago
I fixed my issue. Apparently, when using LDAP or AD the password cannot be...

bret has commented on ISE LDAP Password Change

1 year 3 months ago
I am running 1.2.0.899.

bret has commented on ISE LDAP Password Change

1 year 3 months ago
I am running v 1.2.8 and am using LDAP. The issue is when using LDAP and...

bret has created ISE LDAP Password Change

1 year 3 months ago
I recently changed my LDAP password to trouble shoot a TAC case I have open....

bret has commented on EAP-TLS with ISE

1 year 4 months ago
Thanks that's what I needed thanks. I was closing out of my current policy...

bret has created EAP-TLS with ISE

1 year 4 months ago
I have been reading the Cisco ISE for BYOD and trying to create an...

bret has created Create Multiple Internet Connections with Single ISP

1 year 4 months ago
I have a block of internet addresses and want to create a second internet...

bret has created Create New Guest Internet Connection

1 year 4 months ago
Hi, I hope someone can help. I have limited experiance working with...

bret has commented on Jabber Video to client outside of firewall

1 year 5 months ago
Expressway - no cluster.

bret has created Jabber Video to client outside of firewall

1 year 5 months ago
Im very new to VCS and VCSE, so any help would be greatly appreciated. Recently...

bret has commented on External DHCP for Anchor Controller

1 year 5 months ago
So working with my server guys we found in the logs the dhcp request is making...

bret has commented on External DHCP for Anchor Controller

1 year 5 months ago
Thanks George!

bret has commented on External DHCP for Anchor Controller

1 year 5 months ago
I got the controller working with DHCP- stupid me did not have the helper-...

Bio












bret's Stats

Points10
Discussion started 42
Answers marked as Correct 0
Endorsed 1
Content Rated 13