Carlos de Armas

Member Since: Dec 16, 2013

User Badges:

English
Carlos de Armas commented on vpn 2 peers to 1 peer in VPN 1 month ago

I was thinking the same thing, to translate the traffic. But i dont see how to do it. Do you have...

Carlos de Armas commented on vpn 2 peers to 1 peer in VPN 1 month ago

Thank Rahul for your answer. That still has one problem. I need to have both vpn at the same time...

Carlos de Armas commented on ip secondary vpn. in WAN, Routing and Switching 1 month ago

Right now i dont have the config (not at the office) but i can tell you that R2 uses two identicall...

Carlos de Armas commented on Static routes problem. in WAN, Routing and Switching 2 years ago

Dont worry Jon, if you want to do it, it would be a fun lab to do i guess! Running Eigrp is not...

Carlos de Armas commented on Static routes problem. in WAN, Routing and Switching 2 years ago

Jon, thats correct.I missed that part when writing the explanation.The b.b.b.b network is of the v....

Carlos de Armas commented on Static routes problem. in WAN, Routing and Switching 2 years ago

JonThanks for your patience!Here is the exact situation:Normal scenario: R1-Spoke-1Vlan1ip address...

Carlos de Armas commented on Static routes problem. in WAN, Routing and Switching 2 years ago

JonThanks for your answerMy bad. Sorry let me try to explain better.The routing protocol we are...

Carlos de Armas commented on CISCO 881GW profile Inactive in WAN, Routing and Switching 2 years ago

Sry about the delay! the profile goes inactive due to lack of traffic. Try making a ping with...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

I´ve never used that debug sry so i cant tell.In the previous debug you show that the client sw is...

Carlos de Armas commented on Cisco 867VAE no console comms after reset in LAN, Switching and Routing 2 years ago

Can you add a capture or copy the boot ? did you try to enter in rommon mode?Regards!

Carlos de Armas commented on Very basic initial configuration question. in Getting Started with LANs 2 years ago

Also if you are adding a new sw to the network i recommend you to reset the vtp in that sw (if your...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

Hello!Can you configure a password for vtp v3 and re configure the domain in the server and re...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

Sure that´s a good point it was just a suggestion but if you want that feature its ok. Discard the...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

Ok, just a brief question. You really need to use vtp v3? i think that you might resolve the issue...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

I´m assuming that you have the VTP server on the root switch. The config imo looks good at least to...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

Can you show the output of the "show interfaces trunk" and "show spanning-tree interface <the ...

Carlos de Armas commented on problem cisco network assistant in LAN, Switching and Routing 2 years ago

Hello there, Check the permissions of the folder/users by right clicking on it and then "...

Carlos de Armas commented on VTP (revision numbers) and one client not getting updates in LAN, Switching and Routing 2 years ago

Hello,Do you have any vtp server configured? did you check if there is any password configured?...

Carlos de Armas commented on Tool to Collect Inventory of Cisco devices in Network in Technical Documentation Ideas 2 years ago

For windows i only used the trial of solarwinds (wich is really good.) it also has free tools.If...

Carlos de Armas commented on CISCO 881GW profile Inactive in WAN, Routing and Switching 2 years ago

No problem :)Maybe you can use keep alive or ipsla Regards

Carlos de Armas commented on How to reduce or eliminate output queue drop? in WAN, Routing and Switching 2 years ago

Hello,Check the output queue size and if you have any QoS that could be the cause.Also you might...

Carlos de Armas commented on CCNP Exam in Seattle Cisco User Group (SEACUG) 2 years ago

Hello, you can take the v1 and then take a v2 to complete the certification. I´m pretty sure....

Carlos de Armas commented on CISCO 881GW profile Inactive in WAN, Routing and Switching 2 years ago

Hello,I think your problem might be here:Profile 1 = INACTIVE*--------PDP Type = IPv4Access...

Carlos de Armas commented on Tool to Collect Inventory of Cisco devices in Network in Technical Documentation Ideas 2 years ago

Hello there.Just to name a few:ZenossCactiZabbixNagiosRegards. 

Carlos de Armas commented on Inter vlan ACL in LAN, Switching and Routing 2 years ago

I think your best bet is to deny the traffic before its proccesed by the router, so you save cpu...

Carlos de Armas commented on root user logged on SSH connections in WAN, Routing and Switching 2 years ago

i think it might be the old sessions that remain there without time out configured.

Carlos de Armas commented on Stp Monitoring in LAN, Switching and Routing 2 years ago

Thanks Peter for taking your time to answer my question. Best regards,Carlos

Carlos de Armas commented on Ripv2 convergion improvement in WAN, Routing and Switching 3 years ago

Thanks Joseph, im gonna keep trying, if anyone knows other solution for routing please let me know

Carlos de Armas commented on Ripv2 convergion improvement in WAN, Routing and Switching 3 years ago

Thanks Joseph for your response.the IOS is: Cisco IOS Software, C860 Software (C860-UNIVERSALK9-M...

Bio

User Badges:

Carlos de Armas's Stats

Points10
Discussion started 5
Answers marked as Correct 2
Endorsed 0
Content Rated 6