ciscojoe837

Member Since: Aug 15, 2008

English
ciscojoe837's Activity on Cisco Support Community
Currently displaying 50 results

ciscojoe837 has commented on Cisco 867 - cisco867vae - dual wan - backup wan

4 months 5 days ago
Thanks for that.I checked and I do have the advip ios image.  However,...

ciscojoe837 has commented on Cisco 867 - cisco867vae - dual wan - backup wan

4 months 6 days ago
Thanks for that Mark.Seems like a lot of work for such a simple feature though...

ciscojoe837 has created Cisco 867 - cisco867vae - dual wan - backup wan

4 months 6 days ago
Does the cisco867vae-k9 support dual wan such that the VDSL is the primary WAN...

ciscojoe837 has commented on 1921 Router

4 months 1 week ago
Thanks Mark.

ciscojoe837 has commented on 1921 Router

4 months 1 week ago
Thanks for that.Would you get the non-sec if the 1921 was not going to face the...

ciscojoe837 has created 1921 Router for CCNA

4 months 1 week ago
Can a these routers be used to study for CCNA and would I have to get a serial...

ciscojoe837 has created 1921 Router

4 months 1 week ago
What's the SEC license function on a 1921 router vs. not getting it...

ciscojoe837 has created C2911 Router

4 months 2 weeks ago
The C2911 has 3 integrated 10/100/1000 Ethernet ports (RJ-45 only).Can these...

ciscojoe837 has commented on EOL notice for WLC 2504

4 months 3 weeks ago
Why did you think there was an EOL on the WLC 2504 (just curious)?

ciscojoe837 has commented on CUE on ISR4000

4 months 3 weeks ago
Is that then end of CUE then?  Is that the end of CME too?

ciscojoe837 has created CUE on ISR4000

4 months 3 weeks ago
What is needed to run CUE on the new 4321 ISR? The ISRG2 2911 used  ...

ciscojoe837 has commented on Cisco configuration professional - new versions

4 months 4 weeks ago
I agree.  I am searching for an answer to this as well.

ciscojoe837 has commented on That key is not active here on 7975g=

5 months 1 day ago
I'm using Call Manager Express 8.6 not Call Manager.  The Enable/...

ciscojoe837 has commented on That key is not active here on 7975g=

5 months 2 days ago
I did that and the VPN Enable key still is still greyed out for example. ...

ciscojoe837 has commented on That key is not active here on 7975g=

5 months 2 days ago
I have call manager express 8.6.

ciscojoe837 has created That key is not active here on 7975g=

5 months 3 days ago
I'm trying to edit some settings on the 7975g= phone using SCCP and CME,...

ciscojoe837 has commented on 2901 Router - C2901-VSEC/K9

5 months 1 week ago
Thanks for that.Can you review what I have below and let me note any...

ciscojoe837 has commented on UC560 MOH static

5 months 1 week ago
Convert the MP3 to AU with the format 8 bit ulaw.

ciscojoe837 has created 2901 Router - C2901-VSEC/K9

5 months 1 week ago
I'm looking to get the C2901-VSEC/K9 router with voice bundle under this...

ciscojoe837 has created Cisco 4321 - ISR4321-SEC/K9 - Web Gui

9 months 3 weeks ago
Is there a web GUI for configuration on the new 4321 router?I looked at CNA...

ciscojoe837 has created Call Waiting CID not working - SPA122 - SPA232D

1 year 3 weeks ago
Is there a fix for the Call Waiting Caller ID for these units?  When a...

ciscojoe837 has commented on Skype for Sip Incoming Calls Using Skype Name

1 year 3 weeks ago
I haven't used it in a while ... but what's your specific issue and...

ciscojoe837 has commented on SPA302 /SPA232 and UC500

2 years 10 months ago
It's okay.  I think I got it.

ciscojoe837 has commented on SPA302 /SPA232 and UC500

2 years 10 months ago
Mark, Could you supply the config to get the SPA232 working with the UC540/...

ciscojoe837 has commented on ASA5505 Internal traffic between two subnets

3 years 4 months ago
The 192.168.1.80 is just an inside endpoint on the ASA.  I can ping both ways...

ciscojoe837 has created ASA5505 Internal traffic between two subnets

3 years 4 months ago
How do I allow traffic between two internal subnets behind a router on an ASA?I...

ciscojoe837 has commented on 7941 7975 not registering

3 years 4 months ago
If you didn't save the config just reload and the original startup-config will...

ciscojoe837 has commented on SA540 Security Certificate

3 years 4 months ago
Under key length I selected 2048 (from a list of 512,1024, and 2048).  I can...

ciscojoe837 has created SA540 Security Certificate

3 years 4 months ago
I'm trying to install a security certificate from Geotrust/RapidSSL (and it...

ciscojoe837 has created UC320W Caller-ID

3 years 4 months ago
I'm using only one SIP account (no analog lines) and I want to be able to send...

ciscojoe837 has commented on Telco based voicemail and MWI

3 years 6 months ago
I'm still looking for the full CLI example that shows the MWI indicator of a...

ciscojoe837 has commented on Telco based voicemail and MWI

3 years 6 months ago
How many MWI methods are there?  Please list.  I would take any known, working...

ciscojoe837 has commented on Telco based voicemail and MWI

3 years 6 months ago
I'm looking for the specific CLI to accomplish this though.  So if anyone has...

ciscojoe837 has commented on Telco based voicemail and MWI

3 years 6 months ago
I'm looking to do the same thing but with a SIP-based voicemail.  I need the...

ciscojoe837 has commented on Caller ID with SNR

3 years 9 months ago
I only have VoIP lines (no analog or FXO) and the SNR Caller-ID does not pass...

ciscojoe837 has commented on Caller ID with SNR

3 years 9 months ago
I only have VoIP lines (no analog or FXO) and the SNR Caller-ID does not pass...

ciscojoe837 has commented on Issues that need to be fixed in Smart CallConnector Toolbar 2.2

3 years 11 months ago
Actually the opposite is true: Adding dialing rules to Windows is not a fix. ...

ciscojoe837 has commented on Issues that need to be fixed in Smart CallConnector Toolbar 2.2

3 years 11 months ago
Actually the opposite is true: Adding dialing rules to Windows is not a fix. ...

ciscojoe837 has commented on Issues that need to be fixed in Smart CallConnector Toolbar 2.2

3 years 11 months ago
I totally agree about the 9 (or access number).  I brought this up in another...

ciscojoe837 has commented on Issues that need to be fixed in Smart CallConnector Toolbar 2.2

3 years 11 months ago
I totally agree about the 9 (or access number).  I brought this up in another...

ciscojoe837 has commented on Skype for Sip Incoming Calls Using Skype Name

4 years 3 days ago
Hi Bob,Yes I did.  I can help you with that if you like.

ciscojoe837 has commented on Skype for Sip Incoming Calls Using Skype Name

4 years 3 days ago
Hi Bob,Yes I did.  I can help you with that if you like.

ciscojoe837 has commented on UC320 Babytel Sip Trunks

4 years 3 weeks ago
Yes, BabyTEL works on the UC320W and I've successfully test it.

ciscojoe837 has commented on UC320 Babytel Sip Trunks

4 years 3 weeks ago
Yes, BabyTEL works on the UC320W and I've successfully test it.

ciscojoe837 has commented on How to pass multiple subnets through VPN?? SA520

4 years 4 months ago
I have a similar problem.  I have an SA540 and another firewall doing a site-...

ciscojoe837 has commented on Multisite Deployments

4 years 4 months ago
I should have added that I wanted the two security appliances to do the site-to...

ciscojoe837 has created Multisite Deployments

4 years 4 months ago
Is there any documentation on multisite deployments (2-site in this case) with...

ciscojoe837 has commented on SSL VPN

4 years 5 months ago
Yes, I did run the debug in the previous post and got those type of errors. ...

ciscojoe837 has commented on SSL VPN

4 years 5 months ago
I checked another UC box and it was doing the same thing.  The certificate...

ciscojoe837 has commented on SSL VPN

4 years 5 months ago
I have the latest IOS from the latest SWP and it's been going on for at least...

Bio

B.Sc., Cisco Select Certified, MCP, i-Net+, Network+, A+










ciscojoe837's Stats

Points25
Discussion started 43
Answers marked as Correct 0
Endorsed 0
Content Rated 2
Website: