Rudy Rucker

Member Since: Dec 02, 2011

English
Rudy Rucker commented on OSPFv3 IPv6 in WAN, Routing and Switching 2 years ago

We assign our loopbacks as a /128 and pull them from one /64 block.  Makes it easy to spot a...

Rudy Rucker commented on OSPF on 3750 with IP Base? in LAN, Switching and Routing 2 years ago

Just an update, version 15.0(2)SE5 supports OSPFv3 iwth IPBASE.  I was turning up IPv6 and IP...

Rudy Rucker commented on ip helper-address with two dhcp server in Other Network Infrastructure Subjects 3 years ago

We use isc-dhcpd for our DHCP server here at MonkeyBrains.  Some tips:  http://www.madboa.com/geek/...

Rudy Rucker commented on Failing 3560CG - %PLATFORM-1-CRASHED errors in LAN, Switching and Routing 4 years ago

3 days uptime.  I do have a Tunnel device... perhaps that was crashing 3560C on 12.2(55) -- is the...

Rudy Rucker commented on Failing 3560CG - %PLATFORM-1-CRASHED errors in LAN, Switching and Routing 4 years ago

I've achieved a record 1.5 days uptime and counting!  The solution was to upgrade to 15.0(2)....

Rudy Rucker commented on Failing 3560CG - %PLATFORM-1-CRASHED errors in LAN, Switching and Routing 4 years ago

In case anyone says try upgrading to 15.0, I am updating to c3560c405ex-universalk9-tar.150...

Rudy Rucker commented on How to fix high CPU on 3650C in WAN, Routing and Switching 4 years ago

Updating OS didn't help that much.  Really, it took chaning the device to an NSSA. Looks like the...

Rudy Rucker commented on How to fix high CPU on 3650C in WAN, Routing and Switching 4 years ago

Ah!  Found another one... will just update IOS this time (already disabled unused SFP port) and see...

Rudy Rucker commented on How to fix high CPU on 3650C in WAN, Routing and Switching 4 years ago

Maybe it was just the EX2 that came on the device.  Made it through the day, and...

Rudy Rucker commented on What is this error mean? %PLATFORM_IPC-3-COMMON: Unknown IPC message type in LAN, Switching and Routing 4 years ago

If you are upgrading from 12.2(46)SE to either 12.2(58)SE or 15.0(1)SE  microcodes are part of this...

Rudy Rucker commented on What is this error mean? %PLATFORM_IPC-3-COMMON: Unknown IPC message type in LAN, Switching and Routing 4 years ago

Cisco needs to get an answer out on this one...  If I shut down my te1/1 the errors go away (and...

Rudy Rucker commented on ARP Table & VLANs on a Catalyst Switch in LAN, Switching and Routing 4 years ago

sh mac address-table If you have many vlans, you can use this:...

Rudy Rucker commented on What is this error mean? %PLATFORM_IPC-3-COMMON: Unknown IPC message type in LAN, Switching and Routing 4 years ago

I tried removing dampening, logging event link-status, and...

Rudy Rucker commented on How to find the IP address of a device connected to a specific port in cisco 2960?? in LAN, Switching and Routing 4 years ago

There is a trick for finding IP addresses on Layer 2 only switches.  ... only works if the client...

Rudy Rucker commented on What is this error mean? %PLATFORM_IPC-3-COMMON: Unknown IPC message type in LAN, Switching and Routing 4 years ago

piojo#show version Cisco IOS Software, C3560E Software (C3560E-IPBASEK9-M), Version 15.0(1)SE,...

Rudy Rucker commented on What is this error mean? %PLATFORM_IPC-3-COMMON: Unknown IPC message type in LAN, Switching and Routing 4 years ago

Here is some more info... I can shutdown a port and it stops the IPC messages (of type unknown...

Bio












Rudy Rucker's Stats

Points0
Discussion started 3
Answers marked as Correct 0
Endorsed 0
Content Rated 1