Dan Lukes

This user profile is private

This user will need to follow you before you can view personal information about the user
English
Dan Lukes's Activity on Cisco Support Community
Currently displaying 50 results

Dan Lukes has commented on SPA504G softkey visibility

2 hours 34 min ago
SIP-B is proprietary (Sylantro Systems) extension to SIP protocol. It's...

Dan Lukes has commented on SPA504G Subscriptions timing out

2 hours 39 min ago
So smart devices with insufficient documentation are rather evil than helpful...

Dan Lukes has commented on CISCO SPA5XX Speed Dial with Asterisk: Not working?

2 hours 46 min ago
Better to know, than believe. It's almost impossible that sub=*095 will...

Dan Lukes has commented on Reason Code 33

3 hours 5 min ago
I'm trying to do my best to help you to found one. At the first, you need...

Dan Lukes has commented on How to create a SIP URI speed dial

8 hours 30 min ago
OK, I'm back in my lab for today.in.callcentric.com doesn't exist. I...

Dan Lukes has commented on CISCO SPA5XX Speed Dial with Asterisk: Not working?

9 hours 16 min ago
I'm unsure how the SD feature is implemented on your's Asterisk. There...

Dan Lukes has commented on Cisco SPA232D and PSTN line

13 hours 54 sec ago
Read SPA232D & SPA302D: From Getting Started to Advanced Call Routing...

Dan Lukes has commented on Cisco SPA232D and PSTN line

22 hours 22 min ago
It's up to you to configure how the calls are routed during casual...

Dan Lukes has commented on Cisco SPA232D and PSTN line

1 day 10 hours ago
The hardwired passthru of PSTN line to internal line is emergency feature...

Dan Lukes has commented on Reason Code 33

1 day 22 hours ago
Yes, my Samsung mobile generated such system error in the past..And, again,...

Dan Lukes has commented on CCIE LAB EXAM FOR Non US Imigrants

2 days 8 hours ago
Community Feedback Forum is dedicated to "Tell us your opinions,...

Dan Lukes has commented on SPA122 and Music on Hold (MoH)

2 days 12 hours ago
Read CME 10.5's Cisco Unified IP Phone Support table. 6921 as well as 7931...

Dan Lukes has commented on SPA122 and Music on Hold (MoH)

3 days 17 hours ago
I never tried to configure an ATA device to be MOH source. Our MOH is...

Dan Lukes has commented on SPA122 and Music on Hold (MoH)

3 days 22 hours ago
SPA122 will not play it. It will just claim the phone requested on hold. The...

Dan Lukes has commented on SPA504G softkey visibility

3 days 22 hours ago
It has been asked here several times. Unfortunately, no, it is not possible to...

Dan Lukes has commented on How can I reboot a remote SPA112?

4 days 3 hours ago
It depend on your's ability to create smart scripts. You didn't...

Dan Lukes has commented on 3750X IOS

4 days 4 hours ago
Community Feedback Forum is dedicated to "Tell us your opinions,...

Dan Lukes has commented on Assigning public ip address to the computer which is in office network.

4 days 4 hours ago
Community Feedback Forum is dedicated to "Tell us your opinions,...

Dan Lukes has commented on Cannot send Notify to Cisco SPA with PJSIP driver

5 days 11 hours ago
You need not to wait for Asterisk's team patch. The software sources are...

Dan Lukes has commented on SPA IP Phone: Extracting Configuration with spacfg.xml

5 days 11 hours ago
This document is dedicated to SPA IP Phones, so it doesn't apply to SPA112...

Dan Lukes has commented on Cannot send Notify to Cisco SPA with PJSIP driver

5 days 11 hours ago
So you confirmed the PJSIP authorization is wrong. There's nothing you can...

Dan Lukes has commented on Missing discussions from community feedback forum

5 days 22 hours ago
I'm no longer receiving notification for messages for unpublished threads....

Dan Lukes has created Broken source editing in thread/comment editor (superlong line)

6 days 6 hours ago
The latest CSC release contain the broken source editing feature. The content...

Dan Lukes has commented on Call Manager Masking In Coming Caller-ID number through a manual forward on ATA

6 days 6 hours ago
Even it's forbidden by your's telco ? No.

Dan Lukes has commented on SPA IP Phone: Extracting Configuration with spacfg.xml

6 days 7 hours ago
There's neither xuser nor xpassword parameter mentioned in this document....

Dan Lukes has commented on Cannot send Notify to Cisco SPA with PJSIP driver

6 days 11 hours ago
I'm not early adopter, so I can't confirm the PJSIP is working. I'm...

Dan Lukes has commented on How to create a SIP URI speed dial

1 week 14 hours ago
OK. You can either:1. try to solve the issue by self. Google as well as capture...

Dan Lukes has commented on SPA504G group call pickup working intermittently

1 week 15 hours ago
It may be phone's issue, but according your's description it seems to...

Dan Lukes has commented on SPA525G2 latest firmware to work with UC320W (v7.5.7 ok to use?)

1 week 1 day ago
UC5xx is EOL as well.

Dan Lukes has commented on SPA525G2 latest firmware to work with UC320W (v7.5.7 ok to use?)

1 week 2 days ago
Yes, it will be downgraded. As far as I know.If it is not possible to downgrade...

Dan Lukes has commented on ICM scripting - Capture agent ID and populate variable

1 week 2 days ago
Community Feedback Forum is dedicated to "Tell us your opinions,...

Dan Lukes has commented on SPA525G2 latest firmware to work with UC320W (v7.5.7 ok to use?)

1 week 2 days ago
Firmware version of the phone is driven by UC320 and is locked to the one...

Dan Lukes has commented on How to create a SIP URI speed dial

1 week 2 days ago
As I claimed above, I'm out of my lab. So I can't try. But try to...

Dan Lukes has commented on SPA504G softkey visibility

1 week 2 days ago
There is nothing like "park" feature defined on SIP. So there is NO...

Dan Lukes has commented on SPA500 Series Documentation

1 week 2 days ago
I was really looking for something that said the options for fnc= are......

Dan Lukes has commented on SPA504G Subscriptions timing out

1 week 2 days ago
[Mar 20 09:01:17] WARNING[27958]: chan_sip.c:4103 retrans_pkt: Retransmission...

Dan Lukes has commented on How to create a SIP URI speed dial

1 week 3 days ago
I'm unable to test it now, but if I remember correctly, it's not matter...

Dan Lukes has commented on SPA504G softkey visibility

1 week 3 days ago
All at all, If you defined the key on both Missed_Call and Idle screens, it...

Dan Lukes has commented on Cisco SPA 112 S/N SNMP

1 week 3 days ago
Printed on the device. WWW UI. From CDP request. From embedded certificate. So...

Dan Lukes has commented on SPA504G softkey visibility

1 week 3 days ago
Multiple conditions needs to be meet together to particular PSK become...

Dan Lukes has commented on SPA500 Series Documentation

1 week 3 days ago
... call waiting tone ... I would like to change it, I know where to change...

Dan Lukes has commented on SPA504G Subscriptions timing out

1 week 3 days ago
*_Expires - the proposed expiration time embedded into outgoing registration/...

Dan Lukes has commented on DTMF from SPA502G is not recognized by some IVRs, presumably because they are interrupted too quickly

1 week 4 days ago
Three years passed from original dialog. I assume you have latest firmware...

Dan Lukes has commented on Calling ID number being forwarded to Cell Phone

1 week 4 days ago
I assume the outgoing leg of forwarded call is initiated by Call Manager. So...

Dan Lukes has commented on Calling ID number being forwarded to Cell Phone

1 week 4 days ago
I have a client ... So their ATA is connected to PBX maintained by you ?...

Dan Lukes has commented on SPA525G2 - can't transfer calls, just drops out

1 week 5 days ago
It seems to be provider issue, but it may be triggered by method of transfer...

Dan Lukes has commented on SPA122 backdoor for firmware update?

1 week 5 days ago
I asked because of known issue SPA1xx Firmware Upgrade: No Browse ButtonBut it...

Dan Lukes has commented on How to disconnect a call that is not hung up

1 week 5 days ago
Note the original question is wrong. SPA112 is the server side of the analog...

Dan Lukes has commented on SPA8800 Dail Plan

1 week 5 days ago
No one is oracle here as far as I know. Describe your issue in details, then...

Dan Lukes has commented on How to use the 'next' softkey in XML Directory - SPA504G

1 week 5 days ago
Do I need to program the next softkey to send a URL or something? Yes,...

Dan Lukes's Stats

Points900
Discussion started 64
Answers marked as Correct 98
Endorsed 1
Content Rated 122