dbuckley77

Member Since: Jul 25, 2013

User Badges:

Canada - Français
dbuckley77 commented on Can't access single host on vlan from other vlans in LAN, Switching and Routing 6 months ago

Have not tried another port on the switch. I'm thinking it's host related.  It is a Buffalo NAS.

dbuckley77 commented on Can't access single host on vlan from other vlans in LAN, Switching and Routing 6 months ago

DPW-MDF1-2960#sh int gi0/37GigabitEthernet0/37 is up, line protocol is up (connected) Hardware is...

dbuckley77 commented on Portfast and BDPUguard on Trunk Ports conected to vmware in LAN, Switching and Routing 10 months ago

They are not nexus switches they are 4506. Should we enable portfast and or bdpuguard?

dbuckley77 commented on Does LACP or PAGP Aggregate bandwidth in LAN, Switching and Routing 1 year ago

So we're currently seeing traffic on a gig link routinely hitting 800mbps.  Would a creating an...

dbuckley77 commented on Port Channel Between Two 3560s flashing orange lights in LAN, Switching and Routing 1 year ago

The port-channel appears to be functioning properly and we're having no STP issues with this vlan...

dbuckley77 commented on Port Channel Between Two 3560s flashing orange lights in LAN, Switching and Routing 1 year ago

Switch1 DPW-SAN1-3560#sh runBuilding configuration...Current...

dbuckley77 commented on 3560 Etherchannel Ports are orange in LAN, Switching and Routing 1 year ago

This is the output from the switch with the orange ports. DPW-SAN2-3560#sh etherchannel  sumFlags...

dbuckley77 commented on Inter-vlan data transfer crashed network in LAN, Switching and Routing 1 year ago

I issued a no shut and it took down some switches.

dbuckley77 commented on Inter-vlan data transfer crashed network in LAN, Switching and Routing 1 year ago

I did not notice that.   I checked our other core and it has the same config showing shutdown(below...

dbuckley77 commented on Slow data transfer in one direction in WAN, Routing and Switching 1 year ago

I'm just going by what windows is telling me.  I'm copying from share to share.

dbuckley77 commented on Slow data transfer in one direction in WAN, Routing and Switching 1 year ago

As I said they are on different subnets so this is how they connect.  We have redunandt layer 3...

dbuckley77 commented on Configuring port spanning on a 2960 in LAN, Switching and Routing 1 year ago

monitor session 1 source interface Gi0/34monitor session 1 destination interface Gi0/24...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

I'm not sure what you mean by NAT exemption?  The traffic will be coming from the 10.98.3.0 network...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

I think the line is there because there was no need to translate them.  That network (10.98.3.0)...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

config below: CON-ASA5510# sh run: Saved:ASA Version 8.2(5) !hostname CON-ASA5510domain-name...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

CON-ASA5510# sh natNAT policies on Interface dmz:  match ip dmz 71.181.12.224 255.255.255.224...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

I have attached the nat rules. 

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

I have added a diagram of the firewalls if it would help a little.

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

So I removed the static route and this is the routing table now:  I have bolded the route for the...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

sh route: CON-ASA5510# sh routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

SO I added a route for the 10.98.3.0/24 LAN but it's not working.  I'm not sure I created the route...

dbuckley77 commented on Route Internet traffic across a P2P between two firewalls in LAN, Switching and Routing 1 year ago

On the sonicwall it's not a default route pointing to 10.99.0.2 but a rout policy because we only...

dbuckley77 commented on Setting Up Netflow on Internet Router in LAN, Switching and Routing 1 year ago

I put in place very broad based allow IP for both source and destination in both directions and it...

dbuckley77 commented on Proper way to implement DMZ in Firewalling 1 year ago

SO currently we have a /27 given to us by the ISP for use on our outside interface and another,...

dbuckley77 commented on Proper way to implement DMZ in Firewalling 1 year ago

I'm still confused.  We currently have all the DMZ hosts using public IPs with the gateway for them...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

I got it working.  All I did was delete the NAT rule and re-create it exactly as it had been and it...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

So I ran the packet trace on the NAT rule with the inside address and port 10.1100.30.10:80 as the...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

I moved the NAT rule to the top and the ACL is not below any deny rules. I'm confused as to how to...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

I already tried that but when I did a message popped up saying "this is the ip address of the...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

Below is a screenshot of the packet trace.  Not sure if I did it correctly: CLI text reads: ...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

Where do I run PT from?

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

I have posted an image below of the NAT rule screen from the asdm 8.2It should be fairly...

dbuckley77 commented on Proper NAT Config with port number for public IP in Firewalling 1 year ago

Yes the ACL has been created.  the ACL was created before the original NAT rule was deleted and it...

dbuckley77 commented on Power Injector not working in Other Wireless - Mobility Subjects 1 year ago

As it is now there is a 90 foot cable going directly from the switch to the WAP.  There is no power...

dbuckley77 commented on Link down on one side and up/up on the other in LAN, Switching and Routing 1 year ago

Yes, the side that shows up/up is the side with the media converter and the copper to the switch. ...

dbuckley77 commented on Link down on one side and up/up on the other in LAN, Switching and Routing 1 year ago

We own the fiber.  This is how it goes: Side a switch to 10/100 media converter via copper ethernet...

dbuckley77 commented on Power Injector not working in Other Wireless - Mobility Subjects 1 year ago

The cable has been tested to be good and the cable works without the power injector.

dbuckley77 commented on Verify image on Nexus 3000 in LAN, Switching and Routing 1 year ago

SO I get this CH-SAN2-NX3K# show file bootflash:n3000-uk9.6.0.2.U6.1.bin...

dbuckley77 commented on LACP Etherchannel member port STP blocking in LAN, Switching and Routing 1 year ago

I tried typing it in even though it was not in the help list so what I did was configure another...

dbuckley77 commented on LACP Etherchannel member port STP blocking in LAN, Switching and Routing 1 year ago

I tried that and it won't work. If I get into config on that interface and do a ? it won't even...

dbuckley77 commented on LACP Etherchannel member port STP blocking in LAN, Switching and Routing 1 year ago

So I have LACP etherchannel configured with two ports at each end between two Nexus 3000.  I...

dbuckley77 commented on Port-channel physical interface not up in LAN, Switching and Routing 1 year ago

I have Nexus 3000 series at both ends of the link.

dbuckley77 commented on Port-channel physical interface not up in LAN, Switching and Routing 1 year ago

I'm not sure what you mean by fex or vpc but I have posted the sh runs for the po and member...

dbuckley77 commented on Port-channel physical interface not up in LAN, Switching and Routing 1 year ago

Neither end had graceful-convergence disabled so I disabled it at both ends and the interface that...

dbuckley77 commented on Native vlan question in LAN, Switching and Routing 2 years ago

I'm just getting started myself and appreciate all your help Jon.I have been reading a lot of the...

dbuckley77 commented on Native vlan question in LAN, Switching and Routing 2 years ago

So when you say make the native vlan something other than 1 on the switch I'm inferring that there...

dbuckley77 commented on How to boot with no IOS in flash in LAN, Switching and Routing 2 years ago

I was able to change the Baud on the switch to 115200 successfully but when I changed the session...

dbuckley77 commented on No SSH Capability on 3550 in LAN, Switching and Routing 2 years ago

Thanks. I scrolled down below the image I had originally downloaded and found the K9 image.  I...

dbuckley77 commented on AAA and vty questions in LAN, Switching and Routing 2 years ago

Yes.  Thanks for the help

Bio

User Badges:

dbuckley77's Stats

Points0
Discussion started 42
Answers marked as Correct 0
Endorsed 0
Content Rated 16