Doug Maxfield

Member Since: Feb 03, 2011

Canada - Français
Doug Maxfield commented on On prem ESA and Office 365 in Email Security 1 week ago

Libin, I can confirm that I only have 1 SMTP route.  Currently it is set for our current mail...

Doug Maxfield commented on On prem ESA and Office 365 in Email Security 1 week ago

Libin, Thanks for the response. The message was never queued up in the ESA.  It got delivered to...

Doug Maxfield commented on Scan revealed weak ssl cipher. in Email Security 6 months ago

Thanks for the info.  No expert on ciphers either.  I know that I was able to pass our PCI testing...

Doug Maxfield commented on Scan revealed weak ssl cipher. in Email Security 6 months ago

The error that I was seeing in my logs was "Network Error".  As soon as I put in 3DES in my ciphers...

Doug Maxfield commented on Scan revealed weak ssl cipher. in Email Security 6 months ago

I'll give that a shot.  Not sure of what the other system is running.  The person I'm dealing with...

Doug Maxfield commented on Scan revealed weak ssl cipher. in Email Security 6 months ago

Just an update.  We had to add back in :DES on our Outbound SMTP.  Had a mail server that we could...

Doug Maxfield commented on ESA TLS configuration between 2 mail relays in Email Security 6 months ago

Under Mail Policies, Destination Controls, you can add a Destination to enforce TLS.  Select Add...

Doug Maxfield commented on Scan revealed weak ssl cipher. in Email Security 7 months ago

We just had a TAC opened a couple of weeks ago about the same issue.  This is what was recommended...

Doug Maxfield commented on Incoming Email Final verdict using engine: CASE spam suspect in Email Security 8 months ago

I would recommending opening a TAC on the problem.  You will need to be able to forward the email...

Doug Maxfield commented on Filter my domain as external sender in Email Security 1 year ago

We used the "filters" command from the CLI.spoofing: if (recv-listener == "IncomingMail...

Doug Maxfield commented on Problems sending to access.ironport.com in Email Security 1 year ago

Robert,It appears to be up now.  I just ran the diagnostic test from the CLI and the test completed...

Doug Maxfield commented on Problems sending to access.ironport.com in Email Security 1 year ago

It appears that maybe it started working for a bit this morning.  My backlog went from 25 messages...

Doug Maxfield commented on CSCug73383 - IronPort ESA version 8.0.1-023 in Cisco Bug Discussions 2 years ago

David,Thanks for the info.  We just upgraded to 8.01  about a month ago and this is the first time...

Doug Maxfield commented on CSCug73383 - IronPort ESA version 8.0.1-023 in Cisco Bug Discussions 2 years ago

David,Just received this tonight on one of our ESA.  Would you mind sharing what you have found out...

Doug Maxfield commented on Ironport False Positives in Email Security 2 years ago

Stuart,Here's what we do to get around the same problem.  Create a CLI filter rule similar to this:...

Doug Maxfield commented on Block or Quarantine e-mail from Social Networks in Email Security 3 years ago

Here's what we do:From the CLI, type filtersType newThen add the following:no_facebook_mail: if (...

Doug Maxfield commented on DNS Server Settings Recommendations in Email Security 3 years ago

I would use the default settings(Using the Internet's root DNS servers).  We used for a while our...

Doug Maxfield commented on Marketing emails in Email Security 3 years ago

Robert,Thanks for the reply.I was already aware that there would not be a response back from...

Doug Maxfield commented on Help with CLI filters in Email Security 3 years ago

This is resolved.  Had syntax correct, but just some () in the wrong locations:Correct filter:...

Doug Maxfield commented on Ironport C650. Sophos Anti-Virus Engine update error in Email Security 3 years ago

From the CLI, try "antivirusupdate force".  See if that works.  We have used it in the past when we...

Doug Maxfield commented on Whitelist for CLI created filters in Email Security 3 years ago

When in the CLI, you need to be in cluster mode.  From the prompt, type "clustermode" and select...

Doug Maxfield commented on Spam Detection versus Reputation Filtering Change in Email Security 3 years ago

Daryl,Are you able to confirm that after the reboot that your SBRS updates are happening?  We...

Doug Maxfield commented on How To get low MTW emails to pass? in Email Security 3 years ago

Under Network, Listeners, On your listerner name for Incoming Mail, click on HAT.  From there,...

Doug Maxfield commented on Edit a condition in a Content Filter on IronPort CLI in Email Security 3 years ago

Instead of trying to edit, can you delete the condition and readd it? 

Doug Maxfield commented on Edit a condition in a Content Filter on IronPort CLI in Email Security 3 years ago

Victor,Why can't you edit directly from the GUI?Can you just delete the condition and readd the one...

Doug Maxfield commented on Unable to send emails to particular domain in Email Security 3 years ago

To test, you can use the following CLI tool:CLI: diagnostic (Enter) network (Enter) smtpping (...

Doug Maxfield commented on Howto brand encrypted message notification and the secure envelope in Email Security 4 years ago

Ed,We were able to upload an image for our envelopes.  Thanks for the help.One question, were you...

Doug Maxfield commented on Security Services \ Outbreak Filters - Maximum Message Size to Scan? in Email Security 4 years ago

We have our set to 1M.  The only issue is that it will use more memory to scan.  Other than that,...

Doug Maxfield commented on Howto brand encrypted message notification and the secure envelope in Email Security 4 years ago

We tried using the option for a link to our logo and it kept the Cisco logo in the corner.  But...

Doug Maxfield commented on Howto brand encrypted message notification and the secure envelope in Email Security 4 years ago

Click on Security Services, IronPort Email Encryption, Then click on your Profile.  From there, you...

Doug Maxfield commented on quarantine notification for marketing emails in Email Security 4 years ago

Jaki,To follow up on this, is there a way to create a report of all emails that have been "flagged...

Doug Maxfield commented on Email being dropped by CASE for one user but not others in Email Security 4 years ago

Have you checked your mail logs to see if maybe the sender is "round-robining" the mail through...

Doug Maxfield commented on Reporting on Spam Released from Quarantine in Email Security 4 years ago

Run a Message Tracking report and in the Envelope Recipent put in [email protected]

Doug Maxfield commented on Suspected Spam Rating in Email Security 4 years ago

Starla,All of that can be changed under Incoming Mail Policies, Anti-Virus.  We have our default...

Doug Maxfield commented on Ask the Expert: Best Practices for Configuring the Email Security Appliance in Email Security 4 years ago

Woody,Thanks for the info.  I will review it and see what we can change.Just a quick question on...

Doug Maxfield commented on Ask the Expert: Best Practices for Configuring the Email Security Appliance in Email Security 4 years ago

We have been running the Ironport C370 for over 1 year now and would like to say they are the best...

Doug Maxfield commented on Policy order question in Email Security 4 years ago

The easiest way would be to create a CLI filter for this.  We have similar requirements for...

Doug Maxfield commented on Office 2007/2010 Attachment recognition in 7.5 in Email Security 4 years ago

David,Here's the bug number for the Office Attachment problem:  defect 81190Doug

Doug Maxfield commented on Office 2007/2010 Attachment recognition in 7.5 in Email Security 4 years ago

David,I asked the same questions when 7.6 FCS was released.  The response that I received back was...

Doug Maxfield commented on Trouble with MS Office Attachments in Email Security 4 years ago

The issue is fixed with the 7.6 release.Doug

Doug Maxfield commented on AsyncOS 7.5.1 upgrade in Email Security 4 years ago

Ruveni,I would not upgrade to until 7.6 comes out unless you have a need to.  We installed the 7.5....

Doug Maxfield commented on Office 2007/2010 Attachment recognition in 7.5 in Email Security 4 years ago

Daryl,If you can get access to the AsyncOS 7.6.0 for Email FCS, the Office attachment problem is...

Doug Maxfield commented on Extracting e-mails from quarantine in Email Security 4 years ago

tester,Releasing items from the Quarantine this way does keep all headers intact.  I just verified...

Doug Maxfield commented on Extracting e-mails from quarantine in Email Security 4 years ago

The quarantines have an option when looking at the e-mail to send it to another user.  That way,...

Doug Maxfield commented on Office 2007/2010 Attachment recognition in 7.5 in Email Security 4 years ago

Daryl,I opened a ticket with TAC.  This has been flagged as a bug:The behavior you are reporting is...

Doug Maxfield commented on Trouble with MS Office Attachments in Email Security 4 years ago

Per ticket SR 620476383: The behavior you are reporting is tracked in our bug database as defect...

Doug Maxfield commented on Office 2007/2010 Attachment recognition in 7.5 in Email Security 4 years ago

Daryl,Thanks for the update.That's what I was afraid of.  Doug

Doug Maxfield commented on Office 2007/2010 Attachment recognition in 7.5 in Email Security 4 years ago

Daryl,I'm running into the same problem after the upgrade.  Have you found any solution to the...

Doug Maxfield commented on Reports of Spam at multiple clients in Email Security 5 years ago

Chris,Since you broke down all of the different ways to submit Spam, I though that I would let you...

Bio












Doug Maxfield's Stats

Points53
Discussion started 15
Answers marked as Correct 5
Endorsed 2
Content Rated 9