e-chuah

Member Since: Jul 16, 2002

English
e-chuah commented on fabricpath HSRP localization for DCI in Other Data Center Subjects 2 years ago

Hi Amit,  Thanks for the reply.  Any idea if Anycast HSRP is supported in N5K or N6K ?  THanks  Eng...

e-chuah commented on fabricpath HSRP localization for DCI in Other Data Center Subjects 2 years ago

Just realised that anycast HSRP feature is available in NXOS 6.2. But not sure if it can be used...

e-chuah commented on Unicast OTV deployment experience in Server Networking 4 years ago

Hi Al,  Other than the bugs i mentioned above, we also hist memory leak issues with 5.2.1. So i...

e-chuah commented on NTP problem on Nexus 7000 in Server Networking 4 years ago

Hi Andrew,  configure the below in the default vdc, the "clock protocol ntp vdc x" command is...

e-chuah commented on NTP problem on Nexus 7000 in Server Networking 4 years ago

Hi Prkrishn,  THanks for the reply. You are correct. Manage to get it working by some trial and...

e-chuah commented on Data Center Interconnect - Layer 2 Extension using vPC in Server Networking 5 years ago

this will work if it is *only* layer2 between the two pairs of N7K. You cannot create a L3 SVI and...

e-chuah commented on QoS between 5k+2k in Server Networking 5 years ago

Hi,  The better one ican find is this... hope it helps.  http://www.cisco.com/en/US/docs/switches/...

e-chuah commented on N5k Peer keepalive path in Server Networking 5 years ago

Alternatively, for your option B, you can have a direct link between the two 5548 for vpc keepalive...

e-chuah commented on vpc system priority in Server Networking 5 years ago

Hi Vinayak, Thanks for the explanation. I have two more questions. (Question1) - If i have less...

e-chuah commented on Nexus 5k - vpc to vpc in LAN, Switching and Routing 5 years ago

Hi, I am just wondering if the setup will work when you have only two links between the two vpc (i....

e-chuah commented on Display Jumbo frame statistics in N7K in Server Networking 5 years ago

Hi Just an update. I opened a TAC case and according to TAC, it's a bug. There was a bug filed (...

e-chuah commented on Nexus 7000 table map in Server Networking 5 years ago

just an update. I was told by TAC the default-map cannot be displayed. But the switch will copy the...

e-chuah commented on Viewing QoS statistics in N7K in Server Networking 5 years ago

Just an update. I checked with Cisco TAC and was told that there is no command to verify egress...

e-chuah commented on Nexus 5000 mls qos trust DSCP on Fabric Extender ports in Server Networking 5 years ago

Hi Jeye, Thanks for the clarification. Rgds Eng Wee

e-chuah commented on Nexus 5000 mls qos trust DSCP on Fabric Extender ports in Server Networking 5 years ago

Hi Jeye, This is from the N5K qos config guide. (1) By default, all Ethernet interfaces are trusted...

e-chuah commented on N5K and N2K in Server Networking 5 years ago

Hi Lucien, Thanks for your help. After configuring both the N5K identically, everything works !...

e-chuah commented on multiple FC link from FI to MDS switch in Unified Computing 6 years ago

Hi Jeremy,  >the vHBAs from each blade are suppose to be automatically pinned to an FC uplink in...

e-chuah commented on Fabric Interconnect uplink failure in Unified Computing 6 years ago

Hi Ferreira,  Thanks for the reply.  The uplink LANSwitch is actually a VSS.  If i connect the two...

e-chuah commented on Fabric Interconnect uplink failure in Unified Computing 6 years ago

Forgot to mention that FI-A and FI-B is configured as switch mode.

e-chuah commented on blade to IO module port for B-250 in Unified Computing 6 years ago

Hi..  Just an update. Did a test in the lab. The workaround that i sent in the previous post works...

e-chuah commented on blade to IO module port for B-250 in Unified Computing 6 years ago

Hi Ken I did a check with the Cisco account team and the workaround is as follows: Slot 1 B250...

e-chuah commented on blade to IO module port for B-250 in Unified Computing 6 years ago

Hi Ken,  Thanks for the clarification. So if i my B250M has only one Mezz card, then IOM link2 and...

e-chuah commented on Palo in Unified Computing 6 years ago

thanks Chris,   I think you are right. I also got hold of some internal cisco doc that explains...

e-chuah commented on 6120 Fixed Port License Usage in Unified Computing 6 years ago

Hi..  I have a similar output in my lab setup. In my lab setup, i did not purchase any license and...

e-chuah commented on FWSM memory partitions in Firewalling 6 years ago

kusankar & Jon,  Thanks for the reply. I managed to get hold of a FWSM and downloaded 4.x to...

e-chuah commented on FWSM on VSS, interchassis link. in Firewalling 6 years ago

Hi..I don't think u can use the 1G link in the Sup720 to build a GEC for the failover pair.THis is...

e-chuah commented on H-REAP and SSID in Other Wireless - Mobility Subjects 6 years ago

Hi,for the "Employee" SSID, i mapped it to the Employee interface.For the "Employee-H" SSID, i...

e-chuah commented on tx-power questions in Other Wireless - Mobility Subjects 6 years ago

Hi jerome,i was referring to http://www.cisco.com/en/US/docs/wireless/access_point/channels/lwapp/...

e-chuah commented on PEAP intermittent problem in Other Wireless - Mobility Subjects 6 years ago

Hi Robert, thanks for the reply.At the client, it got stucked at "Pls wait while windows connect to...

e-chuah commented on H-REAP vs local AP in Other Wireless - Mobility Subjects 7 years ago

Hi...Another disadvantage of H-REAP local switching is that it can only support L2 roaming. I don't...

e-chuah commented on H-REAP vs local AP in Other Wireless - Mobility Subjects 7 years ago

Hi Jeff,Thanks for the comments. I totally agree on your points.That's also what i know so far......

e-chuah commented on Sup2/msfc2 from Hybrid to native, disk0: problem in LAN, Switching and Routing 7 years ago

Hi..Thanks for all the reply. my rommon version is 7.1(1). I managed to get it working when i do...

e-chuah commented on QoS show commands in Cat4500 in LAN, Switching and Routing 7 years ago

HiEdison,Thanks for the reply. But it looks like it is only applicable when u use policing. If i...

e-chuah commented on Cat6500 QoS - priority-queue queue-limit in LAN, Switching and Routing 7 years ago

attached is the "show queueing interface" output using IOS with 12.2.18SXF2 and below. It does not...

e-chuah commented on Cat 3560 voice vlan problem in LAN, Switching and Routing 7 years ago

Hi..It's the same with other switches.Duplex and speed setting is auto.It is not the phone that is...

e-chuah commented on Cat 3560 voice vlan problem in LAN, Switching and Routing 7 years ago

Hi,The command is already there. But still same problem.Rgds

e-chuah commented on Cat 3560 voice vlan problem in LAN, Switching and Routing 7 years ago

Hi Mahmood,Yes, there is a switchport access vlan in that port. Sample config of the portint fa0/0...

e-chuah commented on Follow QoS SRND even if don't have so many classes? in LAN, Switching and Routing 7 years ago

Hi Joseph,Thanks for the reply. I also read this in the documentation and have concerns on the...

e-chuah commented on Ezvpn problem with Xauth auto connect in VPN 7 years ago

Yes, i log a case with TAC, it is a bug + config issue.If you are using 2800/3800 platform, upgrade...

e-chuah commented on Cat 6500 QoS - bandwidth allocation ratios in LAN, Switching and Routing 7 years ago

Hi Jon,thanks for the reply. THe URL does answer my question on WRR.If i have a 1p7q8t that uses...

e-chuah commented on Ezvpn problem with Xauth auto connect in VPN 7 years ago

Hi Farrukh,i checked that as well, it indicates not allowed.I tested this in GNS3..but i believe...

e-chuah commented on Ezvpn problem with Xauth auto connect in VPN 7 years ago

Hi...I saw this message EZVPN(EZ) Server does not allow save password optionin the ezvpn client (...

e-chuah commented on QoS MIB in ME3400 in Network Management 9 years ago

Hi Davistan,So does the CISCO-PORT-QOS-MIB allows u to see per class policing statistics ?ThanksEng...

e-chuah commented on QoS MIB in ME3400 in Network Management 9 years ago

u can go to MIBs locator in CCO. Key in the platform as ME3400, IOS 12.2.25EX1 and IP metro access...

e-chuah commented on GEC - odd and even number of ports ? in LAN, Switching and Routing 9 years ago

Hi guys,Thanks for the reply. I did a further search in CCO documents as well, what both of u said...

e-chuah commented on ISC 4.2 Sybase Backup/Restore Tool in Network Management 9 years ago

Hi..I think u need to source the correct environment.e.g.,. /opt/isc-4.2/bin/vpnenv.shI encountered...

e-chuah commented on IP Phone 7912 and 7936 in IP Telephony 9 years ago

Hi Axel,Thanks for the reply. Both 7912G and 7936 can support multicast. We tested this in customer...

e-chuah commented on How to see the size of mls cache on Sup1 CatOS in LAN, Switching and Routing 9 years ago

I saw the below in CCO document, i think this command should show the active mls entries.Console...

e-chuah commented on Codec issue with ICT and IP-IVR in Other Collaboration, Voice, and Video Subjects 9 years ago

Hi..We encountered a few more problems in the actual deployment when the MTP box is cheked:(1) fax...

e-chuah commented on H323 gateway and codec in Unified Communications Applications 10 years ago

just an update, it works now. I have a couple of voip statements and the matching one happens not...

Bio












e-chuah's Stats

Points18
Discussion started 93
Answers marked as Correct 1
Endorsed 0
Content Rated 11