edwardwaithaka

Member Since: Apr 08, 2006

English
edwardwaithaka's Activity on Cisco Support Community
Currently displaying 50 results

edwardwaithaka has commented on WAE 674 Disk based software not installed.

2 months 4 weeks ago
What steps did you take to resolve the issue? I have the same issue on WAVE 594...

edwardwaithaka has created WAVE 594 running version 4.4.5 - "Disk based software not installed" Error

2 months 4 weeks ago
Hi,We have a bunch of WAVE 594 devices with below error message when you telnet...

edwardwaithaka has commented on WAAS Upgraded Failed - Disk Based Software not Installed

2 months 4 weeks ago
Hi Zach,I have the same issue on a WAVE 594 running 4.4.5. Any commands I can...

edwardwaithaka has commented on Looping Authentication Page after Successful Login - Cisco ISE Guest Access with WLC (Anchor+Foreign)

3 months 2 weeks ago
send me the link to this Bug ID.

edwardwaithaka has created Looping Authentication Page after Successful Login - Cisco ISE Guest Access with WLC (Anchor+Foreign)

3 months 3 weeks ago
Hi,Our setup is as follows;1) Cisco ISE Policy Nodes within Internal Network2)...

edwardwaithaka has commented on Cisco Web Security Appliance Licensing for High Availability

5 months 1 day ago
Hi,The licensing portal allows you to generate different licenses for the two...

edwardwaithaka has created Cisco ISE & NAC Agent in a Vmware View VDI Environment

10 months 1 week ago
Hi,Anyone deployed Cisco ISE NAC agent on a vmware view virtual desktop...

edwardwaithaka has commented on OpenLdap Cisco ISE 1.2

11 months 8 hours ago
Hi Jeroen,We are using Zentyal which is based on OpenLDAP. We can connect to...

edwardwaithaka has created Cisco 6500 VSS with unequal number of modules

1 year 6 months ago
Hi,I have a VSS config with unequal number of switching modules as follows;...

edwardwaithaka has created Cisco Web Security Appliance Licensing for High Availability

1 year 7 months ago
Hi,I would like to deploy Cisco S170 Web Security Applicance in HA mode.My...

edwardwaithaka has created FCoE between Nexus 5596UP and IBM BNT Virtual Fabric 10Gb Switch Module for BladeCenter

1 year 7 months ago
Hi,Anyone confugured FCoE between Nexus 5596UP and IBM BNT Virtual Fabric 10Gb...

edwardwaithaka has commented on ASA5585-SSP-IPS20 Default passowrd ?

1 year 8 months ago
Thanks, that worked.

edwardwaithaka has created Cisco NAM2320 SFP+/Twinax compatibility

1 year 9 months ago
Hi,Is the NAM2320 Compatible with the below Twinax Cables?SFP-H10GB-CU1MSFP-...

edwardwaithaka has commented on EtherChannel between Nexus 5596UP and IBM BNT Virtual Fabric 10Gb Switch Module for BladeCenter

1 year 9 months ago
Hi Steve,Thanks for your feedback. I had seen that section of the redbook....

edwardwaithaka has created EtherChannel between Nexus 5596UP and IBM BNT Virtual Fabric 10Gb Switch Module for BladeCenter

1 year 9 months ago
Hi, Is it possible to connect the Nexus 5596UP (NX-OS 5.2+) to the IBM BNT...

edwardwaithaka has commented on Server Load-balancing Across Two Data centers on Layer 3

1 year 11 months ago
Hi Cesar,I would like to avoid the complexities of policy based routing to...

edwardwaithaka has commented on Server Load-balancing Across Two Data centers on Layer 3

1 year 11 months ago
Hi Soren,The CAS servers will be in two different DCs in two different subnets...

edwardwaithaka has created Server Load-balancing Across Two Data centers on Layer 3

1 year 11 months ago
Hi,I have a customer who would like to load balance two Microsoft Exchange 2010...

edwardwaithaka has commented on Configuring the nV Edge System on the Cisco ASR 9000 Series Router

2 years 1 month ago
Hi Igor,The ASR9006 will be used as a BNG gateway. From the IOS side, the bng...

edwardwaithaka has commented on Configuring the nV Edge System on the Cisco ASR 9000 Series Router

2 years 1 month ago
Hi,Will two routers with the below specs form an nV?Sup EngineA9K-RSP440-SE...

edwardwaithaka has created Configuring the nV Edge System on the Cisco ASR 9000 Series Router

2 years 1 month ago
Hi,What are the hardware requirements for the nV Edge system?Im still not very...

edwardwaithaka has commented on Is 7600-SIP-400= & SPA-1XOC12-POS Supported on Old Cisco 7609?

2 years 1 month ago
Thanks.

edwardwaithaka has commented on Is 7600-SIP-400= & SPA-1XOC12-POS Supported on Old Cisco 7609?

2 years 1 month ago
Hi Raj,There is a conflicting statement;• Requires Supervisor Engine 720-3B or...

edwardwaithaka has created Is 7600-SIP-400= & SPA-1XOC12-POS Supported on Old Cisco 7609?

2 years 1 month ago
Hi,Is the 7600-SIP-400= & SPA-1XOC12-POS still supported in the old models...

edwardwaithaka has created Cisco UCM 8.6 Business Edition 6000 Video integration with Radvision Video Conferencing

2 years 2 months ago
Hi,I am in the process of installing CallManager 8.6 business edition and the...

edwardwaithaka has created Cisco UCM 8.6 Business Edition 6000 Video integration with Radvision Video Conferencing

2 years 2 months ago
Hi,I am in the process of installing CallManager 8.6 business edition and the...

edwardwaithaka has created Cisco UCM 8.6 Business Edition 6000 Video integration with Radvision Video Conferencing

2 years 2 months ago
Hi,I am in the process of installing CallManager 8.6 business edition and the...

edwardwaithaka has created Cisco UCM 8.6 Business Edition 6000 Video integration with Radvision Video Conferencing

2 years 2 months ago
Hi,I am in the process of installing CallManager 8.6 business edition and the...

edwardwaithaka has commented on Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
IOS upgrade worked

edwardwaithaka has commented on Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
Upgrade of IOS resolved the issue.Sent from Cisco Technical Support Android App

edwardwaithaka has commented on Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
I will schedule an upgrade and see if it helps. Thank you.

edwardwaithaka has commented on Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
I will schedule an upgrade and see if it helps. Thank you.

edwardwaithaka has commented on Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
------------------ show inventory ------------------NAME: "CISCO3945-CHASSIS",...

edwardwaithaka has created Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
Hi,We have installed a VWIC3-2MFT card on a Cisco 3945 voice gateway but the...

edwardwaithaka has created Cisco 3945 Router not detecting VWIC3-2MFT-T1/E1 Voice Card

2 years 2 months ago
Hi,We have installed a VWIC3-2MFT card on a Cisco 3945 voice gateway but the...

edwardwaithaka has created Cisco VPN client 5.0 issues on windows 7 64bit

2 years 3 months ago
HiVPN client is misbehaving. It connects and authenticates well but pc has no...

edwardwaithaka has created Cisco ONS15310 Virtual Circuit (VC) Configuration

2 years 12 months ago
Hi,I have a couple of questions on ONS15310 Virtual Circuit (VC) configuration;...

edwardwaithaka has created Cisco ONS15310 Virtual Circuit (VC) Configuration

2 years 12 months ago
Hi,I have a couple of questions on ONS15310 Virtual Circuit (VC) configuration;...

edwardwaithaka has commented on "Forbidden" message when trying to access LMS 4.0

3 years 6 days ago
Hi Kimberly,How did you resolve the 403 Forbidden Error Message?

edwardwaithaka has commented on "Forbidden" message when trying to access LMS 4.0

3 years 6 days ago
Hi Kimberly,How did you resolve the 403 Forbidden Error Message?

edwardwaithaka has commented on DCNM 5.2.2 installation in CentOS 5.5

3 years 6 days ago
Tested and its not possible.

edwardwaithaka has commented on DCNM 5.2.2 installation in CentOS 5.5

3 years 6 days ago
Tested and its not possible.

edwardwaithaka has created DCNM 5.2.2 installation in CentOS 5.5

3 years 1 week ago
Hi,Is it possible to install DCNM 5.2 in CentOS 5.5?

edwardwaithaka has created ASA/FWSM Cut-Through Proxy Login Page HTML Customization

3 years 4 months ago
Hi,Is it possible to customize the cut through proxy login page?Any pointers/...

edwardwaithaka has created CiscoWorks LMS 4.0.1 High Memory Utilization on Windows 2K8 R2

3 years 4 months ago
Hi,What causes LMS 4.1 to have high memory utilization?

edwardwaithaka has commented on Authorization in ACS 5.2

3 years 7 months ago
Hi Marc,I resolved my issue. Apparently it was an issue with my AAA configs on...

edwardwaithaka has commented on Authorization in ACS 5.2

3 years 7 months ago
Hi Marc,Rename the file to 5-2-0-26-5.tar.tar and try to unzip it.In short,...

edwardwaithaka has commented on Authorization in ACS 5.2

3 years 7 months ago
Hi Marc,What version are you running? 5.2.0.26.x?I wanted to try and upgrade to...

edwardwaithaka has commented on Authorization in ACS 5.2

3 years 7 months ago
Hi Nic,I am also facing the same challenge. When I check the "AAA Protocol ->...

edwardwaithaka has commented on Cisco IP Solution Center - Error when creating reports, Deleting SR jobs manually from cli, ISC auto start after boot

3 years 9 months ago
For 1. Maybe it is a licensing issue (NBI licenses), which version are you? I'...

Bio












edwardwaithaka's Stats

Points5
Discussion started 65
Answers marked as Correct 0
Endorsed 0
Content Rated 21