esomarriba

Member Since: Aug 02, 2005

English
esomarriba's Activity on Cisco Support Community
Currently displaying 50 results

esomarriba has commented on Pb to reach ISE Guest portal due to DNS constraints

10 months 1 week ago
Hey Travis, Can you share a little more details on how you fix this issue...

esomarriba has commented on Pb to reach ISE Guest portal due to DNS constraints

10 months 1 week ago
I'm having the same issue here. Our guest users need to use IP address to...

esomarriba has created ISE 1.2 - Guest Services

1 year 1 month ago
Hi All,I'm planning to setup Cisco ISE - GNAC services and I want to know...

esomarriba has created Nexus DC-to-DC: Connectivity

1 year 2 months ago
Hi All,I am currently working on a project where the goal is to connect two...

esomarriba has commented on Nexus 5020 Global statistics disabled

2 years 1 week ago
Did Cisco give you a Bug ID by any chance?

esomarriba has created UCS B440 M2

2 years 1 month ago
Hi All,Is the new UCS B440 M2 supported on 2.0(3a) version or do we need to...

esomarriba has commented on Setting Up vPC between 6K and 5K

2 years 8 months ago
No, I don't have them on VSS and don't plan to.- I'm thinking of doing LACP(...

esomarriba has created Setting Up vPC between 6K and 5K

2 years 8 months ago
Hi All,I would like to know if Cisco has any documentation pointing to best...

esomarriba has commented on Port-channel Problem between Fabric Interconnect and N7K vPC

2 years 10 months ago
Hi Nguyen Duc Trung,Can you share your N7K vPC configuration with UCS-M? If...

esomarriba has commented on Dynamic Configuration Tools

2 years 11 months ago
Same here,

esomarriba has commented on Dynamic Configuration Tools

2 years 11 months ago
Same here,

esomarriba has commented on dot1q and 6248 Interconnects Connectivity

2 years 11 months ago
I want to connect a 6248 FI to a 6500 using WS-X6716-10GE, what SFP should I...

esomarriba has commented on dot1q and 6248 Interconnects Connectivity

2 years 11 months ago
I want to connect a 6248 FI to a 6500 using WS-X6716-10GE, what SFP should I...

esomarriba has commented on NCS TACACS+ with ACS 4.2

3 years 1 month ago
Hi Dominic,I'm having the same issue, I'm trying to configure ACS with NCS but...

esomarriba has commented on NCS TACACS+ with ACS 4.2

3 years 1 month ago
Hi Dominic,I'm having the same issue, I'm trying to configure ACS with NCS but...

esomarriba has created Unsupported module

3 years 5 months ago
Hi All,We ordered the wrong part number for a Cisco 4506 non-E chassis, the...

esomarriba has commented on More DHCP Snooping Questions

3 years 7 months ago
Hi Mike,Check the following link: http://www.cisco.com/en/US/docs/switches/lan/...

esomarriba has commented on CPU Utilization spikes because of SNMP

3 years 7 months ago
Hi Edison,Do you have an access-list for your SNMP community string?

esomarriba has commented on CPU Utilization spikes because of SNMP

3 years 7 months ago
Hi Edison,I agree with Joseph, go back to your monitoring software and check...

esomarriba has commented on More DHCP Snooping Questions

3 years 7 months ago
Hi Mike,You should be fine enabling DHCP Snooping on your primary switch and...

esomarriba has commented on Problem with spanning tree on one VLAN only

3 years 7 months ago
Hi bridgepartners,I would recommend Layer 2 hardening on the network to prevent...

esomarriba has commented on Switching Design for a big Network

3 years 7 months ago
As a side note, make sure you are not over subscribing your uplinks. As part of...

esomarriba has commented on Switching Design for a big Network

3 years 7 months ago
Hi Zain,If you are going to use the 3560 platform you will need to upgrade your...

esomarriba has commented on dhcp snooping issues with phone

3 years 7 months ago
Hi Carl,Try the following best practice:interface FastEthernet 0/X description...

esomarriba has commented on lan switching

3 years 7 months ago
Hi Kumar,Try: show ip arp | include (insert MAC here); that will output the IP...

esomarriba has commented on Switching Design for a big Network

3 years 7 months ago
Hi Zain,Before you start buying gear, I would recommend setting up some...

esomarriba has commented on Dot11Radio0 Interface in reset/down status

3 years 8 months ago
Thank you very much sr.!

esomarriba has commented on Dot11Radio0 Interface in reset/down status

3 years 8 months ago
Hi Surendra,I'm getting: The bug ID CSCtc23789 does not exist. Please verify...

esomarriba has commented on Dot11Radio0 Interface in reset/down status

3 years 8 months ago
Do you have the Bugs ID ?

esomarriba has created Dot11Radio0 Interface in reset/down status

3 years 8 months ago
Hi All,We have two autonomous access point 1142 series running 12.4(21a)JA1 and...

esomarriba has commented on Campus Switching Design

3 years 9 months ago
Do you have a network design for this?

esomarriba has commented on Question on QoS ...

3 years 10 months ago
Hi Sanjay,One more thing, make sure you don't have any rate-limit or bandwidth...

esomarriba has commented on Question on QoS ...

3 years 10 months ago
Mahesh is right. The command "bandwidth" is use only for reference for routing...

esomarriba has commented on interface macro's

3 years 10 months ago
you can still find the command on 12.2 (35) SE5; Compiled Thu 19-Jul-07 18:15...

esomarriba has commented on Catalyst 2950

3 years 11 months ago
Hi lordyrichie,Did you get the Cisco 2950 to work?Regards,Elyinn.-

esomarriba has commented on Enabling NBAR on switches???

3 years 11 months ago
Hi blarkins1,We don't have support for NBAR on 3560 platform. HTH,Elyinn.-

esomarriba has commented on BGP Confederation Config help!

3 years 11 months ago
Hi Mike,Do you have a network diagram you can share with us?To configure a BGP...

esomarriba has commented on OSPF stub area bug

3 years 11 months ago
Hi Geert Nijs,Try debugging the ospf process:— Command: debug ospf packet (...

esomarriba has commented on Advice needed on switch purchase for new network.

3 years 11 months ago
Hi Sean,You should be A-OK using 2960S-24TS-L, keep in mind, Cisco 2960 is...

esomarriba has commented on SPT Root priorities - which way is best?

3 years 11 months ago
Hi lsimancek,Both Cisco commands accomplish the same final goal. Try using root...

esomarriba has commented on Windows 7 machines not getting DHCP IP !!!!URGENT!!!!!!

3 years 12 months ago
Hi Muhammad,At this point I would recommend opening a SEV 1 Cisco TAC case and...

esomarriba has commented on CISCO881GW and IPS

4 years 4 days ago
Yes Adv Services is going to cost you more. With IOS 15 you have the option to...

esomarriba has commented on %LTL-SP-2-LTL_PARITY_CHECK: LTL parity check request for xxxxxx

4 years 1 week ago
reduce you syslog history buffered, you should get rid of this msg. I had the...

esomarriba has commented on Converter from ethernet to serial

4 years 1 week ago
a very good company is RAD.com, the best in the industry, pretty expensive but...

esomarriba has commented on Packet drop in tunnel branch

4 years 1 week ago
Hi,- Are you having packet loss from the physical interface that's connected to...

esomarriba has commented on Ethernet bundling !!

4 years 2 weeks ago
this will not be possible using your current situation.-

esomarriba has commented on ISP - Migrated But I cannot get Ping

4 years 2 weeks ago
Hi vipin,The blacklisted IP address has nothing to do with your current issue....

esomarriba has commented on 2 Meg Serial Circuit issue.

4 years 2 weeks ago
Hi Amjad,What problems are you facing? packet-loss?

esomarriba has commented on OSPF functions. Load balancing.

4 years 1 month ago
What was your solution?

esomarriba has commented on How to check internet leased line speed connected to cisco router.

4 years 1 month ago
If you have the budget, get SolarWinds Toolset Eng Edition. They have great...

Bio

I'm a Senior Network Engineer working for Tetra Pak, Inc. Denton, Texas










esomarriba's Stats

Points49
Discussion started 6
Answers marked as Correct 4
Endorsed 0
Content Rated 3
Website: