etamminga

Member Since: May 29, 2002

English
etamminga commented on CLI Output to Local SNMP oid value in EEM Scripting 7 months ago

Can you please point me to the document that shows me how? A simple search on Expression-mib in...

etamminga commented on Arabic installer in Jabber Clients 7 months ago

Cool eh!

etamminga commented on Jabber for iPhone cannot call over Expressway. Expressway says: Bad Extension in Jabber Clients 1 year ago

Yes, I got an answer from TAC and it is was the solution to my problem.It had to do with announcing...

etamminga commented on ASA 9.3 - Multiple Context - IPv6 between contexts in Firewalling 1 year ago

Hi,It turns out to be not supported on ASA 9.3. The IPv6 neighbor mechanism relies on multicasting...

etamminga commented on Extension Mobility User Assign in IP Telephony 1 year ago

Hi Manish,What should a customer do with 100 Phones, 100 ENHP licenses, 100% Extension Mobility and...

etamminga commented on ASA 9.3 - Multiple Context - IPv6 between contexts in Firewalling 1 year ago

Hi,Thanks. I suspected something like this. All IPv6 manual pages say it is supported in multi-...

etamminga commented on Jabber for iPhone cannot call over Expressway. Expressway says: Bad Extension in Jabber Clients 1 year ago

Thanks.I've created a TAC case to get some assistance with this. Waiting for the TAC engineer ....

etamminga commented on CUCM: Cleanup TFTP server content. Tool available? in IP Telephony 1 year ago

Manish,Thank you. I'll proceed and write me a tool that does this via CLI. I didn't know CLI had...

etamminga commented on CUCM 10.5 LDAP question in IP Telephony 1 year ago

Hi,Yes you can! Just specify an LDAP filter to each cluster that only matches users from a specific...

etamminga commented on AnyConnect NAM does not remember my WiFi settings in AAA, Identity and NAC 2 years ago

Hi,I can confirm that in version 3.1.05170 the problem has NOT been fixed.We stopped using NAM for...

etamminga commented on Cisco 9951/9971, VPN, MTU, Fragmentation: how does it work? in IP Telephony 2 years ago

Hi,We also have a case open (for months now). SR 627971355 We think we loose the packets at our...

etamminga commented on Federation and security / DMZ in Jabber Clients 2 years ago

Hi Martin,I managed to get the federation working, but not via a DMZ. Static NAT translations on...

etamminga commented on Cisco 1841 Max 1.5MB/s between Fa0/0 and Fa0/1 in LAN, Switching and Routing 2 years ago

Hi,Try removing all statements from your Fa interfaces except the IP address and NAT statements an...

etamminga commented on DRS on Publisher in IP Telephony 2 years ago

Did you perhaps also change IP addresses on the boxes? Any chance DNS is out of sync?Regards,...

etamminga commented on CUCM 8 change in Hunt name display in IP Telephony 2 years ago

Cisco, Any update on this? Is it possible to see the Original Dialed Number as well as the...

etamminga commented on Restrict Access to one Particular number from PSTN and Inside cluster in IP Telephony 2 years ago

You can do this by passing al traffic from the pstn to the meetme number through a CSS that has...

etamminga commented on UC licensing issue in IP Telephony 2 years ago

If i recall correctly, the minimum number of cuwl/std/pro/enh licenses is 50 for new systems.Sent...

etamminga commented on CUCM 9 Directory Enhancement question in IP Telephony 2 years ago

Hi,Once you enable LDAP Directory integration on CUCM all existing users with the same username as...

etamminga commented on CUCM 9.1 & Android Phones in Jabber Clients 3 years ago

Install it on all nodes in the clusterRegards,ErikSent from Cisco Technical Support iPad App

etamminga commented on + sign support for UCCX and Unity Connection in IP Telephony 3 years ago

Users do not need access to the CTI port if you configure the CTI RP to be able to call the CTI...

etamminga commented on + sign support for UCCX and Unity Connection in IP Telephony 3 years ago

Hi,We have 99% +E164 configuration CUCM clusters running with 1% not being e164, on uccx.We use...

etamminga commented on EIGRP for IPv6 in Firewalling 3 years ago

Thanks for the response!Sent from Cisco Technical Support iPad App

etamminga commented on EIGRP for IPv6 in Firewalling 3 years ago

Hi,That network has all kinds of redundant links and we engineered eigrp metrics all throughout the...

etamminga commented on Polycom HDX8000 and Cisco ASA 5512 in Video Over IP 3 years ago

the "deny tcp (no connection)" message is triggered by an incoming packet for a tcp connection that...

etamminga commented on Cost effective FXO device? in IP Telephony 3 years ago

Hi,I didn't have much difficulty with it.It is located at one of our customers so I cannot check...

etamminga commented on WAE and WAVE in Wide Area Application Services (WAAS) 3 years ago

Hi,NME's and SRE's will not work in ASR1000.If I'm informed correctly; use a separate WAVE device...

etamminga commented on SMB or CIFS ver 5.1 in Wide Area Application Services (WAAS) 3 years ago

Use smb if you are dealing with windows 2008 servers only (SMB2), use CIFS if you need to handle...

etamminga commented on SRE module PT in progress in Wide Area Application Services (WAAS) 3 years ago

Hi PT In Progress, means the waas accelerator did not see the TCP handshake at the start of the...

etamminga commented on Cant Access GUI on new WAAS Device in Wide Area Application Services (WAAS) 3 years ago

Dit you do a "cms enable" after configuring the cm role?Regards,ErikSent from Cisco Technical...

etamminga commented on WCCP Redirection on a GRE Tunnel in Wide Area Application Services (WAAS) 3 years ago

Hi,Yes, it will work.Regards,ErikSent from Cisco Technical Support iPad App

etamminga commented on Container High Load on Cisco 2611XM (MPC860P) in LAN, Switching and Routing 3 years ago

Hi,Get a 870 of 880 or asa5505 for home use. These will be laughing at the 2611 and will do at...

etamminga commented on Weird problem in Phones with CUCM 7.1.3 (Muted/one way call) in IP Telephony 3 years ago

Hi,We have seen 6941's do one-way audio (6941 not sending). We have a case open. Do you have this...

etamminga commented on Cisco Sip vrs SCCP in IP Telephony 3 years ago

Make sure you have a look at the 6941/45. I think they are great 7911 replacements. And they run...

etamminga commented on Ability to force deskphone mode at first launch in Jabber Clients 3 years ago

Hi,Yes, CUCM 9 has the settings for it, but the current version of Jabber for Windows doesn't do...

etamminga commented on Ability to force deskphone mode at first launch in Jabber Clients 3 years ago

Hi,Yes, we need this very badly. We have rolled out jabber to a customer where users have an...

etamminga commented on EDI directory lookup, is overruled by local Outlook contacts in Jabber Clients 3 years ago

Hi,Thanks for that! 5pnts.I personally think EDI is more authoritative than outlook, at least for...

etamminga commented on EDI directory lookup, is overruled by local Outlook contacts in Jabber Clients 3 years ago

Hi fabio,The bug id is not visible on CCO. (Partner login)I'm interested in the bug details. The...

etamminga commented on Connecting USB Hub through a Cisco IP Phone 7942 in IP Telephony 3 years ago

Please tell us what you are seeing on the switch. Do the logs complain about (re-)authentication on...

etamminga commented on WebEx and CUWL in IP Telephony 3 years ago

Hi,Okay, that's a little different. Standards based video doesn't mix that well with webex web...

etamminga commented on WebEx and CUWL in IP Telephony 3 years ago

Well, there is a whole lot of documentation on the subject. What aspects do you want more...

etamminga commented on WebEx and CUWL in IP Telephony 3 years ago

Hi,It means both. You get one year of free webex services with CUWL pro. Once activated you can use...

etamminga commented on Mobile Challenge 2/25/2013 – 3/8/2013 in Cisco Support via Mobile 3 years ago

C it is.Regards,ErikSent from Cisco Technical Support iPad App

etamminga commented on 6941 firmware 9.3(3) - Web access disabled in IP Telephony 3 years ago

Thanks, but I think it would be better to put the required devicepack version (in full detail, not...

etamminga commented on 3, 4, 5 digit translation patterns in IP Telephony 3 years ago

Make use of this opportunity and tell the users to dial 5 digits instead of the old 3! They will...

etamminga commented on 6941 firmware 9.3(3) - Web access disabled in IP Telephony 3 years ago

Before I installed the devicepack I made sure all phones had a local load configured. So the phones...

etamminga commented on Corporate Directory for Jabber for Windows in Jabber Clients 3 years ago

Hi David,The jabber application (and any other Im/presence application) is not designed to take/...

etamminga commented on 6941 firmware 9.3(3) - Web access disabled in IP Telephony 3 years ago

Hi,In the mean time we installed the devicepack released in December and it also gave us the web...

etamminga commented on Jabber 9.1.3 Visual Voicemail Credentials in Jabber Clients 3 years ago

Glad I could help. Thanks for the rating,ErikSent from Cisco Technical Support iPad App

etamminga commented on Jabber 9.1.3 Visual Voicemail Credentials in Jabber Clients 3 years ago

This can be configured via the Jabber-config.xml file that you can upload to the tftp servers. It...

Bio

CCNP-, CCNP Voice & CCDP Certified
Cisco Partner










etamminga's Stats

Points188
Discussion started 61
Answers marked as Correct 16
Endorsed 0
Content Rated 23
Website: