feisalb

Member Since: Oct 13, 2004

English
feisalb's Activity on Cisco Support Community
Currently displaying 50 results

feisalb has commented on Dynamic vpn over 4G does allow remote initiated traffic in except for ping

1 month 6 days ago
Good old RELOAD did the trick.

feisalb has created Dynamic vpn over 4G does allow remote initiated traffic in except for ping

1 month 1 week ago
Hello All I have created a dynamic vpn over a 4G in a 1921 router and...

feisalb has commented on ip sla will not inject route back to the original default gateway

1 month 1 week ago
Fixed by adding a permanent static route to the icmp echo target.Thanks for...

feisalb has created ip sla will not inject route back to the original default gateway

1 month 1 week ago
Hello All I am trying to run ip sla on a cisco 1921 router on ver 15....

feisalb has created wwan 3G/4G 4G LTE HWIC VPN (with dynamic ip)Configuration assistance to multi context asa

2 months 1 week ago
Hello All I have a customer that has several sites all over the world and they...

feisalb has created wwan 3G/4G 4G LTE HWIC VPN (with dynamic ip)Configuration assistance to multi context asa

2 months 1 week ago
Hello All I have a customer that has several sites all over the world and they...

feisalb has created wwan 3G/4G 4G LTE HWIC VPN (with dynamic ip)Configuration assistance

2 months 1 week ago
Hello All I have a customer that has several sites all over the world and they...

feisalb has created Help with blocking cli on cme 10.5 (Sip Phones)

2 months 3 weeks ago
Hello All I have a customer requirement for blocking cli for certain user...

feisalb has commented on How to choose buttons on 8800 expansion for blf speed dials on cme 10.5

2 months 3 weeks ago
Thanks KKoeper 12.I configured a voice template and button-layout 1-5...

feisalb has created How to choose buttons on 8800 expansion for blf speed dials on cme 10.5

2 months 3 weeks ago
Hello All I have a cme 10.5 with 8851 and 8800 sip expansion module in...

feisalb has created SITE 2 SITE VPN terminating on a natted address,can it be done.

8 months 4 weeks ago
Hello I need to create a site 2 site vpn  between a private ip...

feisalb has commented on Configuring Push to Talk

1 year 3 weeks ago
Hello Leah The link provided does not work. Do you have a working link?...

feisalb has commented on Configuring Push to Talk

1 year 3 weeks ago
Hello Leah The link provided does not work. Do you have a working link?...

feisalb has created PUSH TO TALK PTT ON CME 8.6 GUIDE

1 year 3 weeks ago
Hello AllI am trying to configure PTT and need a step by step guide as the...

feisalb has commented on Overlapping subnets on IPSEC VPN Tunnels and NAT config

1 year 1 month ago
I think I might need to get rid of the route map at the end of the static so...

feisalb has commented on Overlapping subnets on IPSEC VPN Tunnels and NAT config

1 year 1 month ago
I think I might need to get rid of the route map at the end of the static so...

feisalb has commented on Overlapping subnets on IPSEC VPN Tunnels and NAT config

1 year 1 month ago
 Should the interesting traffic acl for the static be ip access-list...

feisalb has commented on Overlapping subnets on IPSEC VPN Tunnels and NAT config

1 year 1 month ago
 Should the interesting traffic acl for the static be ip access-list...

feisalb has created Overlapping subnets on IPSEC VPN Tunnels and NAT config

1 year 1 month ago
Hello All I am trying to create a  ipsec tunnel between to sites that...

feisalb has commented on Help with translation Pattern

1 year 5 months ago
Think I got itvoice translation-rule 1 rule 1 /^545460/ /3600/ rule 2 /^54...

feisalb has created Help with translation Pattern

1 year 5 months ago
I am trying to configure a translation rule so that the last 4 digits on the...

feisalb has created Understanding modem/fax over SIP ITSP PSTN

1 year 6 months ago
Hello AllI am trying to get my head around modem/fax over a sip provider.If I...

feisalb has commented on Cube CME 8.6 And VG 204 with SIP ITSP & Fax/modem Config

1 year 6 months ago
Hello JonathanI think the penny is dropping.I don't think I can use mgcp on the...

feisalb has commented on Cube CME 8.6 And VG 204 with SIP ITSP & Fax/modem Config

1 year 6 months ago
So the document on cco is wrong?https://supportforums.cisco.com/docs/DOC-...

feisalb has commented on FXS Port MGCP Configuration for Fax

1 year 6 months ago
HelloCan someone provide me with the config of the cucme as I can't find any...

feisalb has commented on Cube CME 8.6 And VG 204 with SIP ITSP & Fax/modem Config

1 year 6 months ago
Can you send me a config for the CME as MGCP server  and for the VG2XX as mgcp...

feisalb has commented on Cube CME 8.6 And VG 204 with SIP ITSP & Fax/modem Config

1 year 6 months ago
Hello JonathanSip provide confirms a list of Supported Codecs and...

feisalb has created Cube CME 8.6 And VG 204 with SIP ITSP & Fax/modem Config

1 year 7 months ago
Hello AllI am trying to configure cucme 8.6 and a  2 x vg 204.One vg 204 will...

feisalb has commented on Attendant console and softphone

1 year 10 months ago
I thought that the CUACx Edition family varies on capacity and redundancy but...

feisalb has created Attendant console and softphone

1 year 10 months ago
This maybe a simple question but does the receptionist need a physical phone or...

feisalb has created Multi party video using Jabber

2 years 3 days ago
Hello AllI have a customer who would like the following requirements from his...

feisalb has commented on Cisco 881 V as voice gateway

2 years 4 days ago
I did see this but was not sure what they meant by pstn fallback port.If I have...

feisalb has created Cisco 881 V as voice gateway

2 years 4 days ago
Hello All,I am trying to find out if the above router can beUsed as voice...

feisalb has created Unity Connection auto attendant and call flow

2 years 1 month ago
Hello All,Can someone explain the call flow of a call coming into unity...

feisalb has commented on SRST Config assistance

2 years 1 month ago
If I have 6 digits from the isdn do I just add the dial-pattern command to...

feisalb has commented on SRST Config assistance

2 years 1 month ago
I read somewhere that I need to add station-Id to the vg224 ports for srst. It...

feisalb has created Problem with Call Handler in Unity Connection

2 years 1 month ago
Hello AllMy scenario is that I have 5 non geographic number coming into the...

feisalb has commented on SRST Config assistance

2 years 1 month ago
Yep, on cucm I have a translation pattern to change the incoming number to 353...

feisalb has commented on SRST Config assistance

2 years 1 month ago
VG224 and fxs ports on the 2921 gateways are sccp controlled so do not have...

feisalb has created SRST Config assistance

2 years 1 month ago
Hello AllMy customer has centralised cucm cluster with satellite sites.All...

feisalb has commented on Caller id not working

2 years 1 month ago
Yep, Route patterns ->  Calling Party TransformationsCalling Line ID...

feisalb has commented on Caller id not working

2 years 1 month ago
Eircom the service provider have come back with some traces.The first trace...

feisalb has created Unity Cx Media Master not allowing me to change recording device

2 years 1 month ago
Hello AllI have tried to record a message on the call handler using the media...

feisalb has created Adding isdn bri to existing h323 router with isdn e1

2 years 1 month ago
Hello AllHow do I add a isdn bri interface to an existing gateway that has e1...

feisalb has created Announcement for called number on cucm 8.6

2 years 1 month ago
Hello AllI have a customer that wants to implement time of day routing and...

feisalb has commented on Caller id not working

2 years 1 month ago
But the customer reckons it worked on the Avaya system before the isdn...

feisalb has created Caller id not working

2 years 1 month ago
Hello All,I have a customer using cucm 8.6 with H323 gateway.Customer is...

feisalb has commented on VG 202 and VG 204 Install help

2 years 1 month ago
Is it the last 9 digits or last 10 digits of the local interface MAC address? I...

feisalb has created VG 202 and VG 204 Install help

2 years 1 month ago
Hello AllI am about to install the above devices at a remote site with remote...

feisalb has commented on FXS ports on voice gateway config needed

2 years 1 month ago
I will give it a go and let you know the results.Thanks

Bio












feisalb's Stats

Points8
Discussion started 86
Answers marked as Correct 0
Endorsed 0
Content Rated 20