f.giordano

Member Since: Jul 14, 2005

User Badges:

English
f.giordano commented on Cube design in Collaboration 5 years ago

Ok thank you.Fabian

f.giordano commented on We are having trouble restoring a backup from SFTP Server to Publisher in IP Telephony 5 years ago

Hi,Already had one issue during a restore which stuck.I opened a Case and the guy asked me to...

f.giordano commented on Problem transfering between CiscoPhones and SIP en CME in IP Telephony 5 years ago

Thx Osvaldo I'll try that.

f.giordano commented on Problem transfering between CiscoPhones and SIP en CME in IP Telephony 5 years ago

Hi,I have exactly the same issue but on 2900 series. Busy tone randomly when transferring internal...

f.giordano commented on Phone keep unregistered randomly within 1 sec (CCME7.1) in IP Telephony 5 years ago

Nope, no document.What we did was to remove one by one all equipment connected to the Lan.When we...

f.giordano commented on Phone keep unregistered randomly within 1 sec (CCME7.1) in IP Telephony 5 years ago

Hi Rich,Which link are you talking about ?RegardsFabian

f.giordano commented on Call history on 8900 series with CME in IP Telephony 5 years ago

Thank you Alex, that did the trick.Waiting for next firmware to correct that now No prob rob, I...

f.giordano commented on Call history on 8900 series with CME in IP Telephony 5 years ago

Alex,Firmware is : sip8961.9-2-1Rob,I think the command you mentionned is only available for SCCP...

f.giordano commented on ATA 187 outgoing fax problem !!! in IP Telephony 6 years ago

Hi Sinisa,Thanks for your post. It helped me a lot to make incoming fax working (ATA187 and T38)....

f.giordano commented on System crash upgrading UC520 to UC520-8.0.2 in Voice Systems 6 years ago

Hi John,We have the same situation for one of our customer since November.We still have a ticket...

f.giordano commented on CUCM 8 change in Hunt name display in IP Telephony 6 years ago

Hi Erik,Thanks for your feedback, I notice this is not only related to firmware version but also...

f.giordano commented on CUCM 8 change in Hunt name display in IP Telephony 6 years ago

Hi,I have the same behaviour than Erik.Upgraded from 6.x to 8.0(3a).After the upgrade, the display...

f.giordano commented on UC520 - Calls dropped when transferred using full consult method in Voice Systems 6 years ago

Ok we got it !Issue was not related to CME or Phones firmwares.The default gateway gateway of the...

f.giordano commented on Phone keep unregistered randomly within 1 sec (CCME7.1) in IP Telephony 6 years ago

Ok we got it !Issue was not related to CME or Phones firmwares.The default gateway gateway of the...

f.giordano commented on Phone keep unregistered randomly within 1 sec (CCME7.1) in IP Telephony 6 years ago

IP-VOICE W/O Crypto 12.4-24.T5 which is the last one.Fabian

f.giordano commented on Phone keep unregistered randomly within 1 sec (CCME7.1) in IP Telephony 6 years ago

I'm not using EMThis command doesn't appear under telephony-serviceFabian

f.giordano commented on UC520 - Calls dropped when transferred using full consult method in Voice Systems 6 years ago

Hi Derek,Did you resolve your issue ?I'm having the same issue with CME 8.0.When an ephone is...

f.giordano commented on Sip calls from CME sent to Provider with wrong header... in IP Telephony 6 years ago

Hi Dilip,Thanks for your analysis.We have a Cisco ASA between the 2821 and the SIP Provider. I'm...

f.giordano commented on Sip calls from CME sent to Provider with wrong header... in IP Telephony 6 years ago

Hi,here is the output you asked for.Thanks for your helpFabian

f.giordano commented on Phone keep unregistered randomly within 1 sec (CCME7.1) in IP Telephony 6 years ago

Hi,I have exactly the same issue on a 2821 CME 7.1.Did you find a solution ???ThanksFabian

f.giordano commented on Sip calls from CME sent to Provider with wrong header... in IP Telephony 6 years ago

Hi Dilip,I'll be on customer site tonight and will be able to take the debug you asked for.I'll...

f.giordano commented on CUPC 8 softphone mode in Unified Communications Applications 6 years ago

Sorry my initial issue is not totally resolved in fact Michael is right, there's a bug when placing...

f.giordano commented on CUPC 8 softphone mode in Unified Communications Applications 6 years ago

Doug, Thanks for that. It works fine. I deleted all my app dial rules and created 4 Translation...

f.giordano commented on CUPC 8 softphone mode in Unified Communications Applications 6 years ago

Doug,Thanks for your input, I appreciate it.Since + dialing is now supported with CUCM v7 or above...

f.giordano commented on CUPC 8 softphone mode in Unified Communications Applications 6 years ago

No I didn't do that again when upgrading from CUPC 7 to CUPC 8.When I run the command "run sql...

f.giordano commented on CUPC 8 softphone mode in Unified Communications Applications 6 years ago

Ok let me explain you what happens.Our country code is 352 (Luxembourg), I have several application...

f.giordano commented on CUPC 8 softphone mode in Unified Communications Applications 6 years ago

Thanks MichaelOne more thing is related to CallRouting from CUPC 8 and + dialing.What pattern are...

f.giordano commented on Unity Connection Temp Fail - Conversation Manager Crashing in Unified Communications Applications 6 years ago

Hi,I'm running a similar issue. We have CUCM 7.1(5) and CUC 7.1(3).CUCM is running on a MCS 7825...

f.giordano commented on Recording Call with Mobile Voice Access in Unified Communications Applications 6 years ago

Yes we already have a discussion about that. They're talking about software development...I just...

f.giordano commented on Recording Call with Mobile Voice Access in Unified Communications Applications 6 years ago

We would like to record the call (audio). We're currently using Nice as a recorder in span mode....

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 6 years ago

Same behaviour for me too.If I launch the app during an active call on my deskphone, it asks me to...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

Hi,This feature will be enable when the field "LDAP Photo Location" will be supported.And it's not...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

No, I didn't restart the cluster since it's not mentionned in the release note...I restarted...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

Ok I did the test, everything is working fine except handoff too...Fabian

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

I followed the entire procedure. it doesn't work even with the cop file...I just upgrade to 7.1(5)...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

Ok. I guess it should be my CCM version (7.1.3.20000-2). I'm currently upgrading to 7.1.5, and will...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

The admin guide indicates that's the DeviceName has to begin with "TCT" and then maximum of 15...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

It's really different...http://www.cisco.com/en/US/docs/voice_ip_comm/cumc/cisco_mobile/iPhone/8_0/...

f.giordano commented on Cisco Mobile 8.0 for iPhone in Unified Communications Applications 7 years ago

Hi David,Unfortunately, this is not as easy as other Sip client...There's specific config with cop...

f.giordano commented on Uccx feature ? in Contact Center 7 years ago

Works Perfect Thx for your timeFabian

f.giordano commented on Uccx feature ? in Contact Center 7 years ago

Hi again,I did more test with the XML Path, and here is the result:My variable from the 'get digit...

f.giordano commented on How to connect 2 triggers ? in Contact Center 7 years ago

Ok. So I won't try it anymore ?What's PER ?

f.giordano commented on Uccx feature ? in Contact Center 7 years ago

Hi again,Thx for your answer.However I did some test this morning, and I can't make it work. I...

f.giordano commented on Uccx feature ? in Contact Center 7 years ago

Ok. thx for your post.I'll try it tomorrow.One more question regarding the size of the xml file.If...

f.giordano commented on Uccx feature ? in Contact Center 7 years ago

Hi,Xml file seems the easiest way to test the solution.Is there any documentation/link explaining...

f.giordano commented on Phone in Fallback mode... Available line 0 ??? in IP Telephony 7 years ago

Don't think it's related to this field since I have only 7 ephone and 9 dn on this site...But here...

f.giordano commented on Playing prompt to called number before transfering call in Contact Center 7 years ago

Hi again,I tried your script... It works pretty well...So I just cut the part i need and everything...

f.giordano commented on Playing prompt to called number before transfering call in Contact Center 7 years ago

Hi,Doesn't help . Even if I put the triggered contact on hold. The second call is placed, the phone...

f.giordano commented on Playing prompt to called number before transfering call in Contact Center 7 years ago

Anyone can help please ?What's wrong with the previous script ?Thx a lotFabian

Bio

User Badges:

f.giordano's Stats

Discussion started
Answers marked as Correct
Endorsed
Content Rated