Frank Durham

Member Since: Aug 27, 2001

User Badges:

English
Frank Durham commented on ZBF-Cellular Interface-SSH in WAN, Routing and Switching 1 month ago

Thank you.. makes perfect sense...  

Frank Durham commented on IPSec VPN Tunnels and routing between branches in WAN, Routing and Switching 1 month ago

Robert- Are you able to post configs(sanitized) for both sides plus the ASA?   the board can take...

Frank Durham commented on DMVPN design limitations in WAN, Routing and Switching 1 month ago

Can you post a sanitize config, so we can see and help? Thanks Frank

Frank Durham commented on EIGRP, dual DMVPN tunnels, and split horizon in WAN, Routing and Switching 1 month ago

Hello- I would configure the HUB & SPOKES as DMVPN Phase 3.  If you do not want the Spokes...

Frank Durham commented on 2 DMVPN Tunnels with MPLS in WAN, Routing and Switching 1 month ago

I agree with Collin, I'd run EIGRP and add the bandwidth xxxx on the tunnel interfaces where xxx is...

Frank Durham commented on EEM Script to identify and email BGP Flap in EEM Scripting 2 months ago

Good Afternoon... I am interested in seeing your complete EEM script to identify BGP flaps and...

Frank Durham commented on AnyConnect - Posture Assessment Failed: Unable to get the available CSD version.... in VPN 2 years ago

@Devlin- Were you able to resolve this issue?  This is not happening for all my clients; actually...

Frank Durham commented on Nexus 5010 and Qlogic 8240 CNA in LAN, Switching and Routing 5 years ago

The Qlogic CNA card is in a VmWare ESXi 5.0 server/Host.  I dont think the issue is on the NetApp...

Frank Durham commented on Nexus 5010 and Qlogic 8240 CNA in LAN, Switching and Routing 5 years ago

yeah sorry its a typo..  I was grabbing part of the config from one of my nexus 5010 and then...

Frank Durham commented on ASA Active/Standby Config Issues in Firewalling 6 years ago

Mike-Thanks for the response.  i will give that a try.ThanksFrank

Frank Durham commented on ASA/PIX/ISA Configuration in Firewalling 10 years ago

I found the G D&%@ problem. The server I was using already has a static nat statement on the...

Frank Durham commented on ASA/PIX/ISA Configuration in Firewalling 10 years ago

The ISA server's dg interface facing the DMZ is blank. This is how the ISA is setup for a backend...

Frank Durham commented on ASA/PIX/ISA Configuration in Firewalling 10 years ago

Nat Statementsnat (VPN) 0 access-list nonatnat (Inside) 1 0.0.0.0 0.0.0.0Global Statementglobal (...

Frank Durham commented on CiscoSecure 3.3 Problem in AAA, Identity and NAC 11 years ago

Marc-I did get the solution. The problem was i was trying to install the certificate from my...

Frank Durham commented on Catalyst 2950 switch in Other Network Infrastructure Subjects 11 years ago

Greetings-From the Unix machines can ping its on interface?Start with pinging the loopback IP...

Frank Durham commented on Wired 802.1x Authentication in AAA, Identity and NAC 11 years ago

1. How come you are using the Radius(IETF) instead of the Radius(Cisco IOS)?2. The attributes you...

Frank Durham commented on Wired 802.1x Authentication in AAA, Identity and NAC 11 years ago

Your config looks good so far, how does your ACS configs look? Can you post some of that info......

Frank Durham commented on Spanning Tree Redundancy Design in Other Network Infrastructure Subjects 11 years ago

I included a diagram to help a little, although I think you have the concept down. The links in...

Frank Durham commented on Spanning Tree Redundancy Design in Other Network Infrastructure Subjects 11 years ago

The reason to set the core to 4096, is to protect you or anyone for introducing another switch into...

Frank Durham commented on TRUNK PORTS (HELP URGENT) in Other Network Infrastructure Subjects 11 years ago

Carl-By looking at this config, it looks as if on the c3550 interface g 0/7 is connected to one of...

Frank Durham commented on TRUNK PORTS (HELP URGENT) in Other Network Infrastructure Subjects 11 years ago

Carl-Thanks for posting the config, I would like to see a network diagram of you switches if you...

Frank Durham commented on Spanning Tree Redundancy Design in Other Network Infrastructure Subjects 11 years ago

I would set the root id on the 3750's to 4096 and set one of your distribution switches to 8196 as...

Frank Durham commented on Stacking 3750 switches in Other Network Infrastructure Subjects 11 years ago

I already have the cables. I just never stacked any already in production. I have always done...

Frank Durham commented on DNS Server Behind Pix in Other Security Subjects 12 years ago

David-Here is what I have on my Pix and it works just great. I am using Pix 520 v6.34.access-list...

Frank Durham commented on PIX 501 Site to Site Help in Other Security Subjects 12 years ago

In my opinion, get out of the PDM; its a GUI Pipe dream. Understand the cli commands first before...

Frank Durham commented on Routing/VLAN Issues between 3640rtr and Pix520 in Other Network Infrastructure Subjects 12 years ago

Is there a way to overcome this. I have my default route set as this...route internet 0.0.0.0 0.0....

Bio

User Badges:

Frank Durham's Stats

Points0
Discussion started 16
Answers marked as Correct 0
Endorsed 0
Content Rated 4