gaursin2

Member Since: Mar 06, 2012

English
gaursin2's Activity on Cisco Support Community
Currently displaying 50 results

gaursin2 has commented on Cisco ACE 4710 - Correct set up mode question

1 year 9 months ago
Hi Ali,Based on your requirement, i guess NAT pool is logical. For...

gaursin2 has commented on ACE - backup sfarm in a different network than primary

2 years 1 week ago
HiConfiguration looks good. I do not see any problem with this setup.

gaursin2 has commented on ACE Load balancing with different source IP

2 years 2 weeks ago
HiI guess stsickiness is answer to your problem. Try static source base...

gaursin2 has commented on 3 out of 20 ACE module contexts in cold state - Certificates are identical on both ACEs

2 years 2 weeks ago
If your state is Standby_HOT then there is no need for re-enable auto-sync.Also...

gaursin2 has commented on ACE4710 info about dropped connections

2 years 2 weeks ago
No, the situatuion which i have explained, ACE will send a RST to close the...

gaursin2 has commented on 294 RAM upgrade

2 years 2 weeks ago
Hi,What i know is wave-294 support 8 GB RAM but only option is 4*2GB and not 2*...

gaursin2 has commented on ACE Config to NAT to Two Different Addresses Depending on Source IP

2 years 2 weeks ago
Hi,problem is in you config, both class are pointing to same VIP and PORT, so...

gaursin2 has commented on ACE4710 info about dropped connections

2 years 2 weeks ago
HI Secind point of unknown URL could be a condition of L7 poilcy map where our...

gaursin2 has commented on 3 out of 20 ACE module contexts in cold state - Certificates are identical on both ACEs

2 years 3 weeks ago
Hi,Every user context must have indentical SSL files to be in sync or FT hot...

gaursin2 has commented on ACE4710 issue with NAT and traffic between RSERVERs

2 years 3 weeks ago
Hi You need to add some more detail of your toplogy. but what i assuming is...

gaursin2 has commented on WAE-294 with IOS 4.4.7 version having temparature alarms

2 years 1 month ago
pls check whether what is the status of LED's on front panel. if LED status is...

gaursin2 has commented on Deterministic WCCP assignment of buckets to WAEs

2 years 1 month ago
I am still confused with what kind of issue you are facing with this type of...

gaursin2 has commented on Deterministic WCCP assignment of buckets to WAEs

2 years 1 month ago
HI Vijay,Few things i want to share from your output, the reason of this ...

gaursin2 has commented on Ace loadbalancer alerting (4710 standalone unit)

2 years 1 month ago
My mistake, i confused rate-limit with conn-limit and provided that option....

gaursin2 has commented on Ace loadbalancer alerting (4710 standalone unit)

2 years 1 month ago
Hi,not sure of VIP rate-miting.  but if it related rserver rate-limiting then...

gaursin2 has commented on Disabling https services on WAE

2 years 1 month ago
Hi,i beleive only way of doing this is by applying ACL on the WAE denying all...

gaursin2 has commented on ACE End to End SSL with Client Authentication

2 years 1 month ago
Not very sure whether this will help you or not, but we can insert DN from...

gaursin2 has commented on Redirecting WCCP to include HTTPS traffic

2 years 1 month ago
Hi Akhila,Can you share your WCCP configuration?

gaursin2 has commented on ACE Resource Tuning of bandwidth throughput.

2 years 2 months ago
what about "limit-resource rate bandwidth" i hope it will solve your issue

gaursin2 has commented on wccp in MLS cisco 7604

2 years 2 months ago
Hi Configuration looks good, but can you please explaing what kind of...

gaursin2 has commented on passive FTP and cisco waas

2 years 2 months ago
HiCan you please share your toplogy [showing WAAS and ZBF and point of...

gaursin2 has commented on GSS Deployement Queries

2 years 2 months ago
Answering to your first point of Link Loadbalancers, yes you can deploy your...

gaursin2 has commented on question in tracing wccp traffic

2 years 2 months ago
Not sure about  internal mechanism which router uses, but from top, router...

gaursin2 has commented on GSS Deployement Queries

2 years 2 months ago
Build your primary GSSMcreate keepalive type, answer dns-list and finaly dns...

gaursin2 has commented on question in tracing wccp traffic

2 years 2 months ago
getting security threat in opening your diagram,regarding wccp exclude in --...

gaursin2 has commented on Problem with Syncing configuration to our CSM

2 years 2 months ago
Hipls check for IOS bug CSCtd09117  and CSCsx64648

gaursin2 has commented on question in tracing wccp traffic

2 years 2 months ago
I will try to explaing what happen next.once traffic is redirected to cache-...

gaursin2 has commented on Replace a Hard Disk on WaaS WAE-7371-k9

2 years 2 months ago
Hi Eder,Raid-5 will automatically install new disk no need for formatting first.

gaursin2 has commented on WAAS design [ pls see attachment ] want to do in INLINE GROUP/INLINE Mode!

2 years 2 months ago
Topology [as per diagram] is good but just take care of deploying WAAS across...

gaursin2 has commented on ACE 4710 - need help configuring backend server monitoring

2 years 3 months ago
Hi Dave,You can use sorry-server or backup server feature. details can be found...

gaursin2 has commented on failover between server farms

2 years 9 months ago
Hi,I beleive Cisco ACE platform because of H/w design will not do failover for...

gaursin2 has commented on I cannot ping any VIP from within the ACE or from rservers

2 years 9 months ago
Hi Chuck,Pinging a VIP from the ACE itself is not allowed, but you can ping it...

gaursin2 has commented on Disk Support for WAVE-574

2 years 10 months ago
i believe we can;t use 250 GB sata option with wave 574, it only support 500...

gaursin2 has commented on WCCP Deployment with VSS

2 years 10 months ago
based on you setup, and considering 6500 doing redirection rather than routers...

gaursin2 has commented on inline mode of operation on a routed uplink

2 years 11 months ago
Hi ,Please provide detail more about physical setup, i beleive we have single...

gaursin2 has commented on Core WAE in Redundancy mode.

2 years 11 months ago
HiWCCP offers two flavors in loadbalcning traffic across a no. of WAE's. Mask...

gaursin2 has commented on Cisco WAE - Loadbalancing with WCCP

2 years 11 months ago
Hi,we have weight option in WCCP configuration of WAE's which will determine...

gaursin2 has commented on Hide external IPs for a pool of web servers?

3 years 3 days ago
my mistake, i missed that statement from global mode config and was looking in...

gaursin2 has commented on Hide external IPs for a pool of web servers?

3 years 4 days ago
yes you understanding is correct, servers will only see connections from these...

gaursin2 has commented on Hide external IPs for a pool of web servers?

3 years 1 week ago
Configuration look perfect as per your need.

gaursin2 has commented on Hide external IPs for a pool of web servers?

3 years 1 week ago
i guess ACE when deployed in layer 7 load balancing mode may help you in...

gaursin2 has commented on Hide external IPs for a pool of web servers?

3 years 1 week ago
Hi, you can use source NAT option to hide to client IP address reaching...

gaursin2 has commented on HTTP or TCP probe

3 years 1 week ago
Hi,An application probe like HTTP will be used in case when we desire to check...

gaursin2 has commented on ACE SSL Offload and Client Authentication

3 years 3 weeks ago
Hi,During SSL client authentication, its your POS terminal should send their...

gaursin2 has commented on ACE 4710 server load balancing

3 years 3 weeks ago
Hi Pushpendra,i didn't qutie understand you question. i guess your requirement...

gaursin2 has commented on PAT Limits??

3 years 4 weeks ago
Hi Steve,your interpretation is correct. Infact i found a BUG which says...

gaursin2 has commented on PAT Limits??

3 years 4 weeks ago
Hi Steve,Limit of cumulative IP address per pat-pool is 64 (including...

gaursin2 has commented on Managing CSS11500 loadbalancers in cluster mode

3 years 4 weeks ago
Hi Adil,what i understood from "cluster" here is Box-to-box redundancy option...

gaursin2 has commented on CSS11503 How to hide cookie ARPT info?

3 years 1 month ago
hi,this is default behaviour of setting IP address in cookie as server...

gaursin2 has commented on wccp configure question in L3 switch

3 years 1 month ago
Dan cache engine is registered and mask bucket is created, so there should be...

Bio












gaursin2's Stats

Points143
Discussion started 0
Answers marked as Correct 22
Endorsed 0
Content Rated 0