Daniele Giordano

Member Since: Feb 23, 2005

English
Daniele Giordano's Activity on Cisco Support Community
Currently displaying 50 results

Daniele Giordano has commented on Cisco 2431-16 Voltage Issues

3 months 1 week ago
Hi, do you have already try alt-battery-feed feed4?See also:https://...

Daniele Giordano has commented on CUBE Incoming call with Alphanumeric field TO problem

5 months 3 days ago
Hi, Do you have already tried a voice translation rule?Something like this:...

Daniele Giordano has commented on DTMF issue on UC560!

5 months 3 days ago
Hi, do you have already tried to change the DTMF on-off time on your...

Daniele Giordano has created how to prevent spiral loops

7 months 3 weeks ago
Hi Experts, I'm working to find a workaround to block SIP spiral loops.I...

Daniele Giordano has commented on Connecting FAX to PSTN line using FXS and FXO ports

7 months 3 weeks ago
In your voice class codec 10 there aren't any codecs declared.Add G.711...

Daniele Giordano has commented on Cisco CUBE Reason: Q.850;cause=65

7 months 3 weeks ago
Cause 65: bearer capability not implemented. Probably there is a...

Daniele Giordano has commented on How to snoop traffic on PGW 2200 with Wireshark

7 months 3 weeks ago
I hope to have understood correctly your question.1) enable the snoop on PGW...

Daniele Giordano has commented on ATA with fax HP LaserJet MFP M880z

10 months 3 weeks ago
You can try to download HP LaserJet MFP M880z manual and set ECM and fax...

Daniele Giordano has commented on Noise between last digit dialed and first ringback

11 months 2 weeks ago
Hi, I had the same issue with 2800 series router. In my case was an IOS...

Daniele Giordano has commented on noise/hissing problem before ring-back-tone

11 months 2 weeks ago
Hi, I had the same issue with 2800 series router. In my case was an IOS...

Daniele Giordano has commented on Media flow-around problem when the codec is changed to t38

11 months 3 weeks ago
Hi. Do you have try to disable h245 tunnel?voice service voip  h323...

Daniele Giordano has commented on configuring pstn trunk for multiples dial-peers

11 months 3 weeks ago
Hi, no way with FXS line. You must have at least an ISDN BRI or an E&M...

Daniele Giordano has commented on how to disable DSP c5510 [FIXED]

11 months 4 weeks ago
Hi Aman, this is the command used:C2811_CC#test dsp device 0 1 ?  dspware...

Daniele Giordano has commented on how to disable DSP c5510 [FIXED]

11 months 4 weeks ago
Hi, I found the right way.In order to disable a C5510 dsp, we must use the...

Daniele Giordano has commented on how to disable DSP c5510 [FIXED]

12 months 1 day ago
Do you mean reload the router or reset the dsp?I want disable the second dsp...

Daniele Giordano has commented on how to disable DSP c5510 [FIXED]

12 months 1 day ago
Hi Aman, the option 4 CHPIR Enable/Disable works like a reset, it doesn...

Daniele Giordano has commented on how to disable DSP c5510 [FIXED]

12 months 1 day ago
Hi Aman, this is the option list of test voice driver: C2811_CC#test voice...

Daniele Giordano has created how to disable DSP c5510 [FIXED]

12 months 1 day ago
Hi Experts, I need to disable a single DSP on a 2811 router. C2811_CC#show...

Daniele Giordano has commented on fax configuration on as5350

1 year 3 weeks ago
Hi, if T.38 is not a must, try to disable it. Fax passthrough has less interop...

Daniele Giordano has commented on SIP Config Help

1 year 2 months ago
Try to add this:voice hunt-group 1 parallel list 1001,1002 pilot...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 2 months ago
Hi jwood, in your log you can see a call destinatated to "INVITE sip:...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 2 months ago
Hi, try with a voice translation rule as explained in a prevoisu post. ...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 2 months ago
Hi, try with a voice translation rule as explained in a prevoisu post. ...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.   1. In your outgoing SIP INVITE the From header is anonymous but...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.   1. In your outgoing SIP INVITE the From header is anonymous but...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
From the debug you can see that the cisco router receives this ID request...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
From the debug you can see that the cisco router receives this ID request...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi. Can you post a new debug using "debug ccsip message" and "...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi. Can you post a new debug using "debug ccsip message" and "...

Daniele Giordano has created PGW hanging calls with Mate_SigPath=Unknown

1 year 3 months ago
Hi. Can someone give me an explanation about these strange hanging calls on PGW...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.In first and second cases you don't get a busy tone but a ringing tone....

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.In first and second cases you don't get a busy tone but a ringing tone....

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi. About CLIR, I'm not sure, but you can try to configre a dial-peer like...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi. About CLIR, I'm not sure, but you can try to configre a dial-peer like...

Daniele Giordano has commented on destination-pattern T

1 year 3 months ago
Hi. See here:http://www.cisco.com/c/en/us/td/docs/ios/12_2/voice/configuration/...

Daniele Giordano has commented on destination-pattern T

1 year 3 months ago
Hi. See here:http://www.cisco.com/c/en/us/td/docs/ios/12_2/voice/configuration/...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.#31# is an ETSI (European Telecommunications Standard Institute) service...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.#31# is an ETSI (European Telecommunications Standard Institute) service...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi, the 403 Forbidden is provided by orange because in your outgoing INVITE the...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi, the 403 Forbidden is provided by orange because in your outgoing INVITE the...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.QUESTIONS and ANSWERS1. (D) +421906200201 also registers, what is wrong,...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi.QUESTIONS and ANSWERS1. (D) +421906200201 also registers, what is wrong,...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi, the config is OK. If you want modify the P-Asserted-ID in the BYE request...

Daniele Giordano has commented on Problem with registration Cisco 2801 as SIP gateway with SIP server

1 year 3 months ago
Hi, the config is OK. If you want modify the P-Asserted-ID in the BYE request...

Daniele Giordano has commented on SPA112 crash after SRV enabled

1 year 3 months ago
Hi. You can find contacts here: http://www.cisco.com/c/en/us/support/web/tsd-...

Daniele Giordano has commented on SPA112 crash after SRV enabled

1 year 3 months ago
Hi. You can find contacts here: http://www.cisco.com/c/en/us/support/web/tsd-...

Daniele Giordano has commented on SRP520 Series SPC Compiler Tool

1 year 3 months ago
I never find an SPC compiler for SRP.I've downloaded the XML config from a...

Daniele Giordano has commented on SRP520 Series SPC Compiler Tool

1 year 3 months ago
I never find an SPC compiler for SRP.I've downloaded the XML config from a...

Daniele Giordano has commented on SPA112 crash after SRV enabled

1 year 3 months ago
The best way is contact STAC and open a case.Regards.

Daniele Giordano has commented on SPA112 crash after SRV enabled

1 year 3 months ago
The best way is contact STAC and open a case.Regards.

Bio










  • Community Spotlight Award

    Small Business January 2014





  • Community Spotlight Award

    Small Business August 2013





  • Community Spotlight Award

    Small Business March 2012









Daniele Giordano's Stats

Points914
Discussion started 24
Answers marked as Correct 112
Endorsed 5
Content Rated 15