gubadman

Member Since: May 10, 2011

English
commented on Understanding on Expressway-Core/Expressway-Edge & VCS Control/VCS-expressway in TelePresence 2 years ago

Hi Sumit,I had a chat with some of the Marketing and Product owners, hopefully the following...

commented on IS TMS involved in a Basic VCS Call in TelePresence 2 years ago

Hi,As you thought, that will be the VCS sending feedback to the TMS that it has a call - in TMS you...

commented on IS TMS involved in a Basic VCS Call in TelePresence 2 years ago

Hi,In this case the license manager is internal VCS code - looking after the traversal and non-...

commented on BANNER in TelePresence 2 years ago

Hi Chet,The banner cannot be changed. It is not an image file.Thanks,Guy

commented on Virtual VCS X8 / Root access in TelePresence 2 years ago

Can you try the password reset procedure on page 274 of this document - http://www.cisco.com/en/US/...

commented on VCS Expressway Cluster use 1 public IP with Loadbalancer? in TelePresence 2 years ago

No. Each peer should have it's own public address.Thanks,Guy

commented on Time To Ring in TelePresence 2 years ago

Do you use FindMe? You can limit ring duration there.

commented on DNS SRV behavior for SIP - VCS-Expressway in TelePresence 2 years ago

Yes, change the SRV to point to two hosts.Thanks,GuySent from Cisco Technical Support iPad App

commented on Jabber/Movi only registers to master VCS control in TelePresence 2 years ago

What do you have in the provisioning data for Movi?I guess you are using a template for Movi in TMS...

commented on SIP Call Failures in TelePresence 2 years ago

No problem. Good to hear it's fixed.Thanks,Guy

commented on SIP Call Failures in TelePresence 2 years ago

Hi Jusin,In the file all.log in the current\eventlog\ directory - the messaging is in there. The...

commented on SIP Call Failures in TelePresence 2 years ago

The no shared media codecs is coming from the MCU - does it support encryption, as the endpoint is...

commented on SIP Call Failures in TelePresence 2 years ago

Hi Justin,I'm still looking at the logs, but first thing I noticed is:*r DiagnosticsResult Message...

commented on Jabber Video: Push SIP Outbound config to users in TelePresence 2 years ago

Do you use TMS-PE to provision them?You should be able to set the following in the Movi template:...

commented on real factroy default (compromised vcs) in TelePresence 2 years ago

Hi Chet,Yes it does a good job of cleaning things out, though it doesn't wipe absolutely everything...

commented on Root Account On the VCS Not Working in TelePresence 2 years ago

Hi,Check out page 298 of the administrators guide - http://www.cisco.com/en/US/docs/telepresence/...

commented on Conductor XC2.2 and TMS 14.3 Automatic Connect in TelePresence 3 years ago

yes, Conductor and VCS have the same base, and the B2BUAs also share some common components (and...

commented on Conductor XC2.2 and TMS 14.3 Automatic Connect in TelePresence 3 years ago

Media should not go through Conductor with B2BUA - only the signalling.Thanks,Guy

commented on TC 6.1.2 call history names instead of IPs? in TelePresence 3 years ago

Hi,I have seen that on a TC6.x load when the endpoint is set to default call protocol of SIP but is...

commented on TMS / MOVI password question in TelePresence 3 years ago

Hi Rod,Glad you've resolved it. This password would be used by hard endpoints such as EX90 to get...

commented on CUCM 8.6 & VCS Expresway StarterPack Integration in TelePresence 3 years ago

Please see the deployment guide here - http://www.cisco.com/en/US/docs/telepresence/infrastructure/...

commented on Questions on VCS Licensing in TelePresence 3 years ago

Yes, that would be correct. Thanks,Guy

commented on Questions on VCS Licensing in TelePresence 3 years ago

LIC-VCS-10 is for 10 non-traversal calls - calls where the VCS doesn't traverse the media - there...

commented on VCS Expressway Locking Up in TelePresence 3 years ago

It looks like it's going to need an RMA - I'd recommend raising a case to TAC and including a full...

commented on BE6K VCS Question in TelePresence 3 years ago

BE6K has VCS-c - it doesn't come with the Expressway option key.Thanks,Guy

commented on VCSc to Tandberg Gatekeeper in TelePresence 3 years ago

VCSc Traversal Client to BC Traversal Server should work - H.323 only though, as no SIP on the BC....

commented on time difference is too large in Other Collaboration, Voice, and Video Subjects 3 years ago

Command is as above: date MMDDhhmm e.g date 05170731 - month,day,hour,minuteSent from Cisco...

commented on time difference is too large in Other Collaboration, Voice, and Video Subjects 3 years ago

I'd strongly recommend you get an NTP server, or use a publically available one - from http://www....

commented on Cisco Telepresence Movi in Jabber Clients 3 years ago

Hi,Does your environment have more than one VCS cluster, and are these two endpoints on different...

commented on Provisioning license limit reached in TelePresence 3 years ago

Are you using TMS-PE?On TMS under Administrative Tools > Configuration > General Settings -...

commented on VCS filtering specific IP addresses as destination in TelePresence 3 years ago

The VCS also has a firewall which can be configured from the web interface - System > Firewall...

commented on TANDBERGE Profile 42" single with C20 in TelePresence 3 years ago

It's CTS-P42C20-K9 but it is End of Sale - http://www.cisco.com/en/US/prod/collateral/ps7060/...

commented on VCS Clustering failing from time to time Error message Failed - This peer either has a different list of peers or it has a different software version installed in TelePresence 3 years ago

30ms is an absolute maximum, 34ms is over 110% of that. The cluster need to be sorted out so even...

commented on VCS Clustering failing from time to time Error message Failed - This peer either has a different list of peers or it has a different software version installed in TelePresence 3 years ago

That's a bit odd. What version of software are you running? Also what is the round trip delay...

commented on anonymous register on Border Controler in TelePresence 3 years ago

Basically someone on the Internet is trying to SSH into your border controller with various...

commented on VCS TLS/SSL Flaw in TelePresence 3 years ago

Oh, that's very strange, we are running this in our office and not seeing any problems, and I know...

commented on VCS TLS/SSL Flaw in TelePresence 3 years ago

It'll put SSLv3 / TLSv1.0 CBC ciphers that fall in to the HIGH category at the button of the list...

commented on presentation problem on SIP calls in CUCM-VSC in TelePresence 3 years ago

ok, can you give us more information on how the advanced zone profile for the link to CUCM is set...

commented on presentation problem on SIP calls in CUCM-VSC in TelePresence 3 years ago

Hi Onur,Take a look at the following document - http://www.cisco.com/en/US/docs/telepresence/...

commented on VCS TLS/SSL Flaw in TelePresence 3 years ago

Hi Justin,On the VCS, create a file with these two lines:SSLHonorCipherOrder OnSSLCipherSuite ECDHE...

commented on VCS TLS/SSL Flaw in TelePresence 3 years ago

Hi Justin,I'll get you a couple of config lines you can put in tomorrow when I'm back in the office...

commented on unable to configure VCS-e in TelePresence 3 years ago

LIC-VCSE-100 is the key for 100 traversal calls, the first part of the option key will end Y100....

commented on Why E20 URI includes protocol token while VCS cannot handle it? in TelePresence 3 years ago

If you've got this 2nd hand I'd strongly recommend you factory reset it. The key sequence: * *...

commented on Cisco Jabber video Media through VCS? in TelePresence 3 years ago

If the subzones associated with the jabber registration have SIP media encryption policy set to...

commented on C series TC60 software issues in TelePresence 3 years ago

I could only move it around the first screen and maximize it on the first screen with the remote...

commented on C series TC60 software issues in TelePresence 3 years ago

I'm running a TC6.1.0 beta load and can set this ok using the touch panel we have connected to our...

commented on Expressway source in TelePresence 3 years ago

Are you sure they were registered - do they appear on the registration or registration history web...

commented on Business Edition 9.x video integration in TelePresence 3 years ago

Hi, There are a number of scenarios where the VCS Control will use Traversal licenses - * H.323...

commented on Expressway source in TelePresence 3 years ago

I'd suggest turning off SIP UDP if it's on and you don't require it - most SIP video conferencing...

commented on VCS equivalent of Calling Party Transformation Mask in the CUCM in TelePresence 3 years ago

Hi Rachel,This post might help - https://supportforums.cisco.com/thread/2128626 as it has some...

Bio












gubadman's Stats

Points340
Discussion started 1
Answers marked as Correct 38
Endorsed 3
Content Rated 1