Ibrahim Jamil

Member Since: Jan 26, 2011

English
Ibrahim Jamil commented on Inter-AS and CsC in MPLS 3 months ago

Thanks Victor Hugo Acevedo

Ibrahim Jamil commented on IOS XR | RPL for BGP multihoming routing manipulation in WAN, Routing and Switching 4 months ago

thanks vinit bro can u drop me ur e-mail ID in  private msg , so that i communicate with you , i...

Ibrahim Jamil commented on send traffic up to line rate ( 1Gbps) in WAN, Routing and Switching 4 months ago

Hi Carlos I would use urs thanks to u and to all guys

Ibrahim Jamil commented on send traffic up to line rate ( 1Gbps) in WAN, Routing and Switching 4 months ago

Hi karsten mate , do you have how the config on java iPref looks like ??? thanks mate in advance

Ibrahim Jamil commented on % Invalid command for VPNv4 neighbor. Use route refresh instead in WAN, Routing and Switching 4 months ago

thanks Paul , for ur good explanation 

Ibrahim Jamil commented on send traffic up to line rate ( 1Gbps) in WAN, Routing and Switching 4 months ago

Hi Paul do i need any class-map shall the ping < other end > size <1gb> enough to let...

Ibrahim Jamil commented on send traffic up to line rate ( 1Gbps) in WAN, Routing and Switching 4 months ago

Hi nagendra this is a devices , ex spirent , right  can i achieve the same as paul mentioned via...

Ibrahim Jamil commented on IPV6 address , how many hosts can i go up for subnet 12 in WAN, Routing and Switching 4 months ago

Hi Jhon thanks for answering mate do you you man the subnet 12 in the above ipv6...

Ibrahim Jamil commented on IOS XR | RPL for BGP multihoming routing manipulation in WAN, Routing and Switching 4 months ago

Hello vinit did y make it bro thanks

Ibrahim Jamil commented on Load balancing is not possible in a multihomed environment with two ISPs in WAN, Routing and Switching 4 months ago

Hi carlos Does the "maximum-path" solve the above statements 

Ibrahim Jamil commented on IOS XR | RPL for BGP multihoming routing manipulation in WAN, Routing and Switching 4 months ago

Hello bro vinit thanks thanks a lot , i am waiting this one bro thanks

Ibrahim Jamil commented on IOS XR | RPL for BGP multihoming routing manipulation in WAN, Routing and Switching 4 months ago

Hi vinit thanks for answering  I have this book along with XR book from ciscopress , didn't help...

Ibrahim Jamil commented on why getting this RIB Failure , what is the reason for RIB Failure in MPLS 5 months ago

Hi philip also another issue ,  i have 9.9.0.1 in the BGP table but i also cant ping it R7#sh ip...

Ibrahim Jamil commented on Hi Cisco TAC Team | any update for the below thread , thanks in WAN, Routing and Switching 5 months ago

Hi philip as i told you before in my previous thread , the bgp multi homing syntax  in XR is...

Ibrahim Jamil commented on BGP Multi-homing on Cisco IOS XR , underlying LF and AS-PATH in WAN, Routing and Switching 5 months ago

Hi bro philip  i am okay with these IOS syntax , but bro , the above wont work with IOS XR mate...

Ibrahim Jamil commented on BGP Multi-homing on Cisco IOS XR , underlying LF and AS-PATH in WAN, Routing and Switching 5 months ago

Hi Philip sorry mate . my mistake i must say LP not LF , its local preference  1. ASR-1 should...

Ibrahim Jamil commented on BGP Multihoming with PfR in WAN, Routing and Switching 5 months ago

Thanks Philip D'Ath bro can y help in thread opened since 3 days whike no one answer regarding BGP...

Ibrahim Jamil commented on P2P /30 Mask over /28 between these 4 routers in WAN, Routing and Switching 5 months ago

Hi Mate you gave me 2 answers without answering my Question :) anyway thanks for ur time bro :) 

Ibrahim Jamil commented on P2P /30 Mask over /28 between these 4 routers in WAN, Routing and Switching 5 months ago

Hi when using /28 between these routers , what is the pros/ functionality over /30 between these...

Ibrahim Jamil commented on ASA-1> en Password: ***** , stuck at this point in AAA, Identity and NAC 6 months ago

thanks guys , i would go with dinesh  as a helpful answer

Ibrahim Jamil commented on i can't ping the inside interface of asa or telnet , when i came via anyconnect vpn in VPN 6 months ago

bro dinesh this is the quickest reply i ever get in net pro support community  indeed the sec...

Ibrahim Jamil commented on in the CRS-16 how bigg is the throughout ? is it 92TB in MPLS 6 months ago

man , we bought 2 x CSR-16   as P  , 

Ibrahim Jamil commented on no BGP default ipv4-unicast in WAN, Routing and Switching 7 months ago

thanks all

Ibrahim Jamil commented on VPNv4 routes exist in the vrf table , but can't ping it in MPLS 7 months ago

Hi bro Giuseppe thanks for ur expert explanation  thanks 

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

thanks a lot bro 

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

bro mark so from 1 to 3967 satisfy the below question  In Data Center 1 configure N7K-1  the root...

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

bro mark , pls see below , ther is no 3967 :( kindly advise   N7K-1(config)# vlan ?   <1-1999,...

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

so this config y mentioned  its correct 100% , perfect while  the below are false  N7K-1 spaning-...

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

bro mark if y  have task to configure N7K-1 the root primary for all vlan while N7K-2 the root...

Ibrahim Jamil commented on VRRP the preempt is enabled by default in LAN, Switching and Routing 7 months ago

Hello bro Giuseppe Larosa i have question , , which of the below is correct config on Cisco Nexus...

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

Mark bro  i am already confused :( on N7Ks with RAPID PVST what is the vlan range  is it from 1-...

Ibrahim Jamil commented on make N7K-1 the root for all VLANs in LAN, Switching and Routing 7 months ago

Hi what about the below N7K-1 spaning-tree vlan 1-4093 root primary N7K-2  spaning-tree vlan 1-...

Ibrahim Jamil commented on VRRP the preempt is enabled by default in LAN, Switching and Routing 7 months ago

Hi I was asking if we keep it active on the backup , on the master it must be there , i am asking...

Ibrahim Jamil commented on the vlan range on nexus its from 1 - 4093 or from 1 - 3967 ???? in LAN, Switching and Routing 7 months ago

Hi jhon so the below are wrong N7K-1 spaning-tree vlan 1-4094 root primary N7K-2  spaning-tree...

Ibrahim Jamil commented on the vlan range on nexus its from 1 - 4093 or from 1 - 3967 ???? in LAN, Switching and Routing 7 months ago

Hi riza are you sure the config will be  N7K-1 spaning-tree vlan 1-4094 root primary N7K-2 ...

Ibrahim Jamil commented on chassis was showing " overall status inoperable" in Unified Computing 8 months ago

Hi bro version 2.3 thanks

Ibrahim Jamil commented on san-port-channel between N5K (with fc Module) and MDS in Other Data Center Subjects 8 months ago

Hi config its correct , but the flow is wrong thats why i got hard times to bring this interface up...

Ibrahim Jamil commented on vPC configuration between 2 FIs and 2 N5Ks . + FCoE over this vPC in Unified Computing 10 months ago

Hi Walter thanks bro , you arre the man of CISCO i will give my 5 points thanks again

Ibrahim Jamil commented on W2k install issue direct on blade in Unified Computing 11 months ago

Hi BroThanks for ur reply do y have video for that matter , that would be easy for mei didnt find...

Ibrahim Jamil commented on Windows 7 decide which route to take if THE PC Has 4 connection (4 X 1 Gig) available to internet in LAN, Switching and Routing 1 year ago

Hi Vasili i can't since each NIC in different VLAN , thus different subnet  thanks

Ibrahim Jamil commented on Does Cisco has vACE in Server Networking 1 year ago

Hiits bad news that ACE gonna be out , so what Cisco Plans for server load balancer  thanks 

Ibrahim Jamil commented on L2 and L3 Routed Link between 2 COREs in LAN, Switching and Routing 1 year ago

 Hi What if the COREs Has Many SVIs , what;s the functionality between L3 Routed Link and L2 Dot1q...

Ibrahim Jamil commented on redundant voice gateway each with 1 E1 Line to PSTN in IP Telephony 2 years ago

Hi thanks for your reply  can i load sharing the inbound and outbound call over these 2 E1s? thanks

Bio










  • 30 Visits





  • 1000 Added









Ibrahim Jamil's Stats

Points16
Discussion started 490
Answers marked as Correct 1
Endorsed 0
Content Rated 678