iroehm

Member Since: Oct 21, 2011

English
iroehm commented on Using UC540 integrated switch port for 2nd expansion switch in Voice Systems 4 years ago

Yes, under Switching->Smartports change one of the ports to type Switch and default VLAN to 1.

iroehm commented on calls routed to mobile in Voice Systems 4 years ago

Hi Rolf,Couple more questions. Who is your SIP provider? If you change the forwarded number to a...

iroehm commented on calls routed to mobile in Voice Systems 4 years ago

Hi Rolf,Couple of questions. What is your provider type (POTS, SIP, GSM Gateway, etc)? Does it...

iroehm commented on Macbook takes long time to get IP address from UC540 in Voice Systems 4 years ago

I would check in CCA and make sure that the Smartports are configured properly on the UC. Configure...

iroehm commented on Macbook takes long time to get IP address from UC540 in Voice Systems 4 years ago

Hello,What is the topology of the network? Is there a switch in betweent the Mac Book and the UC540...

iroehm commented on UC 560 and SPA525G2 in Voice Systems 4 years ago

If you are running Windows 7 or Vista you must completely turn off UAC (which will require a reboot...

iroehm commented on Patch for SPA525 phones showing incorrect date in Voice Systems 4 years ago

I have tried various combinations of the name and they have all worked for me. I would try...

iroehm commented on Patch for SPA525 phones showing incorrect date in Voice Systems 4 years ago

I have found that completely turning off UAC (msconfig.exe > Tools > Change to lowest setting...

Bio












iroehm's Stats

Points5
Discussion started 0
Answers marked as Correct 1
Endorsed 0
Content Rated 0