j_friedrich

Member Since: Nov 29, 2005

English
j_friedrich commented on Cisco 1941W - 2 different subnets on different frequency bands? in Security and Network Management 1 year ago

Hi,      I thought of another possibility....What about using different SSID's assigned to...

j_friedrich commented on Permanently block an ip after X amount of login failures? in Security Management 1 year ago

Hi,      Sorry, I forgot to mention it's a Cisco 3825 router.  We don't have a firewall solution...

j_friedrich commented on Users unable to access US content due to canadian external IP address in Security Management 1 year ago

Hi,     Here is my working solution that I have used for years with StrongVPN.http://forum....

j_friedrich commented on Router reload OR shut/noshut when L2TP tunnel goes down? in EEM Scripting 1 year ago

Hi,      Thanks for the great post.  I obviously modified it a bit to do a shut/no shut on the WAN...

j_friedrich commented on Router reload OR shut/noshut when L2TP tunnel goes down? in EEM Scripting 1 year ago

Hi,      Yes, i've done a "show l2tp" and the result is: %No active L2TP tunnels.  However, for...

j_friedrich commented on Router reload OR shut/noshut when L2TP tunnel goes down? in EEM Scripting 1 year ago

Hi,     I just wanted to add the results of "debug l2tp all".  Here is the sample when the l2tpv2...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,      There must be a way to include the the l2tp state in the script...When I do a show...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     Soooo, I have had some time to look at this and here is the weirdness....btw, thanks...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Just wanted to add the correct answer to this post....

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     So, here is the script I am using....When the L2TP tunnel goes to "no sessions left",...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     I found the solution and modified it to monitor the virtual-ppp1 interface when it...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     Found what I was looking for....https://supportforums.cisco.com/thread/2157144Gonna do...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     So, I am looking at this 2 ways....1.  I have started a l2tp debug to catch the...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     Well, the suggestion I made was maybe to use some variation of the IP SLA and when the...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi,     Got another idea....The L2TP tunnel is using the Virtual-PPP1 interface....What about...

j_friedrich commented on L2TP script to initiate a router reload when tunnel goes down.... in EEM Scripting 3 years ago

Hi Arie,     The router is currently hooked into a 3rd party L2TP VPN service.  On the occassion...

j_friedrich commented on WAN load balancing between 2 routers? in WAN, Routing and Switching 3 years ago

Hi,     The only things we have running is NAT and an acl to drop fragments...that's it.Thanks.

j_friedrich commented on WAN load balancing between 2 routers? in WAN, Routing and Switching 3 years ago

Hi Reza,     Here is a 'show processes cpu sorted' dump for you.  As you can see, there is nothing...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi Joseph,    Thanks again...So, in other words, possible but the better solution is to up the edge...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi Joseph,     So, just following along the topic...Instead of upgrading, we are looking at...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi Joseph,OR load balance it with my existing routers....I can attach a 2821.  The 3825 is doing...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi Joseph,     Thanks for the reply.  So would it be prudent to look at a router based on your...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi guys,     Soooo..we did the above cpu dump having ONE machine tax the isp connection.  So what...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi guys,     Here is the revised dump - 'show processes cpu sorted'...show processes cpu sortedCPU...

j_friedrich commented on utorrent cpu usage...general question. in WAN, Routing and Switching 3 years ago

Hi guys,     Here is a 'show processes' dump for you.  Maybe you can shed some light on why ONE...

j_friedrich commented on Port forwarding confusion? in WAN, Routing and Switching 3 years ago

Hi,Example should be:access-list 103 permit tcp any host 192.168.167.5 eq 10001Thanks.

j_friedrich commented on Easy VPN server setup to tunnel ALL traffic? in VPN 3 years ago

Hi,     Thanks for the reply.  So does my initial example link I followed already ensure ALL trafic...

j_friedrich commented on Cisco 3825 stuck in initial config dialog? in WAN, Routing and Switching 3 years ago

Hi guys,got it, sorry for the dumb post.  got the values i needed.Thanks.

j_friedrich commented on Cisco 3825 stuck in initial config dialog? in WAN, Routing and Switching 3 years ago

Aha,config register is set to 0x2141.  What should it be set to? 0x2102?Thanks.

j_friedrich commented on IP_VFR-4-FRAG_TABLE_OVERFLOW: GigabitEthernet0/1: the fragment table has reached its maximum threshold 16 in WAN, Routing and Switching 4 years ago

Hi guys,     So, to futher my comprehension of this, why is it needed?  Where would you use it?  I...

j_friedrich commented on REALLY slow speedtest on UC540 - affecting inbound call quality? in Voice Systems 4 years ago

Hi Paolo,Thanks for the response.I know it's not designed to be a high speed router.  I kinda...

j_friedrich commented on REALLY slow speedtest on UC540 - affecting inbound call quality? in Voice Systems 4 years ago

Hi guys,     Just to add to the results from different speedtests, roughly 0.24 on another server...

j_friedrich commented on Can't browse over L2TP connection in VPN 4 years ago

Hi Javier,     Was outta town for a bit..Anyways, going back to my acl question.  What if I wanted...

j_friedrich commented on Can't browse over L2TP connection in VPN 4 years ago

Hi Javier,     One more question for you.  My gigabit 0/1 Interface is the isp interface.  As per...

j_friedrich commented on Can't browse over L2TP connection in VPN 4 years ago

Hi Javier,     Killer suggestion!  I have forwarded the link to Cisco support to help me implement...

j_friedrich commented on Cisco router as l2tp vpn client in Remote Access 4 years ago

Hi, Thanks. The destination ip address is the VPN server I am logging into, just to clarify. From...

j_friedrich commented on Cisco router as l2tp vpn client in Remote Access 4 years ago

Hi,I am having trouble getting the static route going. Can you give me an example of what Juan...

j_friedrich commented on Cisco router as l2tp vpn client in Remote Access 4 years ago

Hi,     Okay, I will try it tonite.  Any other thoughts on why the tunnel won't come up?  My debug...

j_friedrich commented on Cisco router as l2tp vpn client in Remote Access 4 years ago

Hi,     Ok.  Will try it.  What about the earlier post from Juan Perez mentioning a static route? ...

j_friedrich commented on Cisco router as l2tp vpn client in Remote Access 4 years ago

Hi,     Thx for the link.  I have gone thru it already.  That's why I'm curious if anyone has a '...

j_friedrich commented on Cisco router as l2tp vpn client in Remote Access 4 years ago

Hi David,     I sent you a private message.  Just wondering if you found the solution to your post...

j_friedrich commented on 1941W PPTP routing in WAN, Routing and Switching 4 years ago

The router is a client terminating a PPTP / L2TP connection.  I haven't decided which to use yet. ...

Bio












j_friedrich's Stats

Points0
Discussion started 39
Answers marked as Correct 0
Endorsed 0
Content Rated 5