Jeff Van Houten
Member Since: Dec 05, 2011
DMVPN requires routers at all locations. Only the central site requires a fixed IP address.
Whether or not you need the aim card is largely a matter of the bandwidth you need to support and...
If you used Cisco routers instead of Asa's, you could use DMVPN.
In addition to Leo's answer, if you are running an image capable, you will want to add no ip http...
Dhcp clients send broadcasts. If all dhcp servers are in the same vlan, whichever answers first...
What address are you trying to ssh into? I was always told not to put an IP address on an...
You can define an internal dns server for the clients to use when they connect.
I think you meant site-to-site VPN between the two Asa. That would be a good design.
Site-to-site VPN with a 2620 xm, no problem. I'd look really close at whether or not webvpn is...
Does the access switch have an svi in the 944 vlan? If not, the MAC address will never show in the...
2 things.First I'd check for a conflict between the network addressing of your internal network and...
Sorry, I assumed a different device. Using that alone, it looks like you're out of luck.Sent from...
NAT.Sent from Cisco Technical Support iPad App
You need to look at the latency between the initial connection after the pause and the beginning of...
- Page 1
Community Spotlight Award
Mobile App Contributor April 2012
Jeff Van Houten's Stats
|Answers marked as Correct||49|