jwbensley

Member Since: Dec 05, 2011

English
jwbensley's Activity on Cisco Support Community
Currently displaying 50 results

jwbensley has commented on ME3800 BGP Limits

5 days 1 hour ago
It feels strange to see my own question copied more or less word for word :)...

jwbensley has commented on MPLS Load Balancing/Sharing with TE or CEF or Both?

2 years 1 month ago
Hi Giuseppe,Many thanks for the info, all very useful!Cheers,James.

jwbensley has commented on MPLS Load Balancing/Sharing with TE or CEF or Both?

2 years 1 month ago
Hi Muhammad,Thanks for the answer, although that hasn't really helped at all.So...

jwbensley has created MPLS Load Balancing/Sharing with TE or CEF or Both?

2 years 1 month ago
So I am just playing around in GNS3 trying to set up multiple ECMP links...

jwbensley has commented on View internal IP routes

2 years 3 months ago
Perfect, thanks!

jwbensley has created View internal IP routes

2 years 3 months ago
Is there anyway I can see how many routes are internal to an AS?So, something...

jwbensley has commented on Show power usage for devices

2 years 3 months ago
Sadly that doesn't seem to be very useful on a 3550 or 7301. I know these...

jwbensley has created Show power usage for devices

2 years 3 months ago
Is there anyway I can see the power usage on either a 3550 switch and/or 7301...

jwbensley has commented on Confusion with multiple upstream eBGP peers (Routing beyond our control)

2 years 6 months ago
Thanks j.blakley,I hadn't heard of OER, this is most interesting. Thanks for...

jwbensley has commented on Using iBGP and an IGP - Where is the cross over point?

2 years 6 months ago
Hi Giuseppe,A great additional point! Many providers are using MPLS now so this...

jwbensley has commented on Using iBGP and an IGP - Where is the cross over point?

2 years 6 months ago
Hi Sudeep,Thanks for some great points that I had completely overlook.Many...

jwbensley has created Questions on fibres

2 years 6 months ago
Searching the Internet with Google I can find many sellers of fibre patch leads...

jwbensley has commented on Router/Switch Uptime

2 years 6 months ago
I have answered my own question. I just booted up a spare switch and left it...

jwbensley has created Router/Switch Uptime

2 years 6 months ago
The following is a snippet from "show version" after a device lost power;sw1...

jwbensley has created Confusion with multiple upstream eBGP peers (Routing beyond our control)

2 years 6 months ago
I am imagining a smallish networking (AS1234) with say three full BGP table...

jwbensley has created Using iBGP and an IGP - Where is the cross over point?

2 years 6 months ago
Where is the cross over point of using an IGP and iBGP?I recently came across a...

jwbensley has commented on Small ISP MPLS Core

2 years 6 months ago
You need to provide more details on the existing set up;Why would you put every...

jwbensley has commented on BGP outbound load balance. Is the local preference the solution?

2 years 6 months ago
Ah I see, sorry I missunderstood.PfR, I was reading this as PBR I am not...

jwbensley has commented on BGP outbound load balance. Is the local preference the solution?

2 years 6 months ago
farisa wrote:GLBP would be a good option in this scenario if you're not running...

jwbensley has commented on BGP outbound load balance. Is the local preference the solution?

2 years 6 months ago
I don't know enough about BGP to suggest how you could do this via BGP. One way...

jwbensley has commented on Understanding "show ip bgp summary" output

2 years 6 months ago
Thanks Milan,I will definately check this book out! Cheers

jwbensley has created Understanding "show ip bgp summary" output

2 years 7 months ago
Could someone please explain some of the lines of output from the command run...

jwbensley has commented on What happens if route map has no destination?

2 years 7 months ago
Thanks Richard, and double thanks for the prompt responce!

jwbensley has commented on 4506 hot swap 100M card for Gig card

2 years 7 months ago
As per the 4500 and 6500/7600 chassis, the box will stay up, the new card will...

jwbensley has created What happens if route map has no destination?

2 years 7 months ago
Router R1 has two fast links and one slow linkThere is a default 0/0 route out...

jwbensley has created What happens if route map is invalid?

2 years 7 months ago
Router R1 has two fast links and one slow linkThere is a default 0/0 route out...

jwbensley has commented on Link flaps; Understanding the logged messages

2 years 7 months ago
Hi Amit,Thanks for your input. Can you explain please what you mean by "Gig...

jwbensley has commented on Can I change ARP timers on a router? (7301)

2 years 7 months ago
Thanks all for the input. Obivous answer there On a side note, does anyone...

jwbensley has created Link flaps; Understanding the logged messages

2 years 7 months ago
The scenario is an MPLS/LDP/ISIS/BGP network, with two PE routers connected...

jwbensley has created Can I change ARP timers on a router? (7301)

2 years 8 months ago
A link went down to another router (R2 @ 10.224.0.6). However I thought I was...

jwbensley has commented on 3560 tftp errors - what does O mean?

2 years 8 months ago
I now this post is old but it ranks high on Google so I'm giving my two pence;...

jwbensley has commented on Where are certificates used on this ASA (8.4)?

2 years 8 months ago
Hi Karsten,Thanks for the reply. Yeah I have checked through the flash for and...

jwbensley has created Where are certificates used on this ASA (8.4)?

2 years 9 months ago
I have access to an ASA running 8.4 and I need to copy the config to another...

jwbensley has commented on When to use CWDM and DWDM?

2 years 9 months ago
Hi Tom,Thank you for the information you have provided. The two DCs are 10Km...

jwbensley has commented on When to use CWDM and DWDM?

2 years 9 months ago
Hi Tom,Many thanks or your response. Bad choice of words on my part, I ment a...

jwbensley has created When to use CWDM and DWDM?

2 years 9 months ago
Hi all,My understanding is that you would use "generally" DWDM to get more...

jwbensley has commented on Troubleshooting High CPU on 1841

2 years 9 months ago
Great, thanks for the info!

jwbensley has commented on Troubleshooting High CPU on 1841

2 years 9 months ago
Of course, interrupt processing, mental slip I think!Although the router was...

jwbensley has created Troubleshooting High CPU on 1841

2 years 9 months ago
Hi All,I am trying to troubleshoot high CPU usage on an 1841. It has a five...

jwbensley has commented on DNS server process, high CPU usage

2 years 9 months ago
Hi Aleksandar,Did you ever find a resolution to your problem? I have just...

jwbensley has created How to test HWIC card

2 years 9 months ago
I suspect a HWIC-1FE in a 2811 might be faulty, what hardware testing commands...

jwbensley has commented on Which BGP show command for internal prefix count?

2 years 9 months ago
Thank you for showing me this command. That is pretty much what I wanted, and I...

jwbensley has commented on SOS! Need suggestion for router, ASAP!

2 years 10 months ago
It looks to me like you are doing only basic routing so an 800 would suffice at...

jwbensley has created Which BGP show command for internal prefix count?

2 years 10 months ago
I have two routers (R1 and R2); R1 has the full BGP table and some local...

jwbensley has commented on Comparing ASA configs

2 years 10 months ago
Diff is my favourite by a long way http://en.wikipedia.org/wiki/Diff

jwbensley has commented on ASA5505-UL-BUN-K9 - Is This Appropriate

2 years 10 months ago
Thanks for clearing those points up for me, that's what I needed to know. That...

jwbensley has created ASA5505-UL-BUN-K9 - Is This Appropriate

2 years 10 months ago
Sorry to be another person asking another question on licenses!I have 80...

jwbensley has commented on Which QoS method and commands do I require?

2 years 11 months ago
Forgot to mention; It's an 1841 with c1841-advipservicesk9-mz.124-25e.bin

jwbensley has created Which QoS method and commands do I require?

2 years 11 months ago
I wish to apply QoS to a router with a DSL line. One the LAN side, there is...

jwbensley has created Layer 2 connection between distant 1841's

3 years 3 days ago
I have two 1841's connect to the Internet via DSL;fa0/0 --- 1841-R1 --- DSL1...

Bio












jwbensley's Stats

Points5
Discussion started 37
Answers marked as Correct 1
Endorsed 0
Content Rated 30