jwbensley

Member Since: Dec 05, 2011

English
jwbensley commented on PPPoE on ASR920 not working in Metro 5 days ago

If you guys didn't see my notes above, PPPoE server is not officially supported for the ASR920 (...

jwbensley commented on PPPoE on ASR920 not working in Metro 5 days ago

Sadly I didn't run any performance testing, I really needed MLPPPoE working so the fact that it isn...

jwbensley commented on PPPoE on ASR920 not working in Metro 5 days ago

Multilink PPP was not working for me. I opened a TAC case and they have confirmed that MLPPP is not...

jwbensley commented on PPPoE on ASR920 not working in Metro 1 week ago

OK, so I was being an idiot and the ASR hadn't booted 3.16.4aS. but 3.16.0 image, after rebooting...

jwbensley commented on PPPoE on ASR920 not working in Metro 2 weeks ago

Hi @Natambu Obleton Did you get this fixed, am I now having the exact same issue?

jwbensley commented on PPPoE on ASR920 not working in Metro 2 weeks ago

@Sysadmin - did you get this resolved in the end? I am having the same exact problem, the ASR920...

jwbensley commented on ME3800 BGP Limits in MPLS 1 year ago

It feels strange to see my own question copied more or less word for word :) http://www.gossamer-...

jwbensley commented on MPLS Load Balancing/Sharing with TE or CEF or Both? in MPLS 3 years ago

Hi Giuseppe,Many thanks for the info, all very useful!Cheers,James.

jwbensley commented on MPLS Load Balancing/Sharing with TE or CEF or Both? in MPLS 3 years ago

Hi Muhammad,Thanks for the answer, although that hasn't really helped at all.So what are you saying...

jwbensley commented on View internal IP routes in WAN, Routing and Switching 3 years ago

Perfect, thanks!

jwbensley commented on Show power usage for devices in Network Management 3 years ago

Sadly that doesn't seem to be very useful on a 3550 or 7301. I know these platform are bit old but...

jwbensley commented on Confusion with multiple upstream eBGP peers (Routing beyond our control) in WAN, Routing and Switching 4 years ago

Thanks j.blakley,I hadn't heard of OER, this is most interesting. Thanks for the info!Cheers.

jwbensley commented on Using iBGP and an IGP - Where is the cross over point? in WAN, Routing and Switching 4 years ago

Hi Giuseppe,A great additional point! Many providers are using MPLS now so this is a crucial point....

jwbensley commented on Using iBGP and an IGP - Where is the cross over point? in WAN, Routing and Switching 4 years ago

Hi Sudeep,Thanks for some great points that I had completely overlook.Many thanks!

jwbensley commented on Router/Switch Uptime in Network Management 4 years ago

I have answered my own question. I just booted up a spare switch and left it for 10 minutes. At...

jwbensley commented on Small ISP MPLS Core in MPLS 4 years ago

You need to provide more details on the existing set up;Why would you put every customer in a VRF?"...

jwbensley commented on BGP outbound load balance. Is the local preference the solution? in WAN, Routing and Switching 4 years ago

Ah I see, sorry I missunderstood.PfR, I was reading this as PBR I am not familiar with PfR, I am...

jwbensley commented on BGP outbound load balance. Is the local preference the solution? in WAN, Routing and Switching 4 years ago

farisa wrote:GLBP would be a good option in this scenario if you're not running full Internet route...

jwbensley commented on BGP outbound load balance. Is the local preference the solution? in WAN, Routing and Switching 4 years ago

I don't know enough about BGP to suggest how you could do this via BGP. One way though to have to...

jwbensley commented on Understanding "show ip bgp summary" output in WAN, Routing and Switching 4 years ago

Thanks Milan,I will definately check this book out! Cheers

jwbensley commented on What happens if route map has no destination? in LAN, Switching and Routing 4 years ago

Thanks Richard, and double thanks for the prompt responce!

jwbensley commented on 4506 hot swap 100M card for Gig card in LAN, Switching and Routing 4 years ago

As per the 4500 and 6500/7600 chassis, the box will stay up, the new card will boot up and function...

jwbensley commented on Link flaps; Understanding the logged messages in WAN, Routing and Switching 4 years ago

Hi Amit,Thanks for your input. Can you explain please what you mean by "Gig interface never goes...

jwbensley commented on Can I change ARP timers on a router? (7301) in LAN, Switching and Routing 4 years ago

Thanks all for the input. Obivous answer there On a side note, does anyone think you should change...

jwbensley commented on 3560 tftp errors - what does O mean? in Other Network Infrastructure Subjects 4 years ago

I now this post is old but it ranks high on Google so I'm giving my two pence;It may be...

jwbensley commented on Where are certificates used on this ASA (8.4)? in VPN 4 years ago

Hi Karsten,Thanks for the reply. Yeah I have checked through the flash for and files in there and...

jwbensley commented on When to use CWDM and DWDM? in Optical Networking 4 years ago

Hi Tom,Thank you for the information you have provided. The two DCs are 10Km apart so there should...

jwbensley commented on When to use CWDM and DWDM? in Optical Networking 4 years ago

Hi Tom,Many thanks or your response. Bad choice of words on my part, I ment a single fibre pair,...

jwbensley commented on Troubleshooting High CPU on 1841 in LAN, Switching and Routing 4 years ago

Great, thanks for the info!

jwbensley commented on Troubleshooting High CPU on 1841 in LAN, Switching and Routing 4 years ago

Of course, interrupt processing, mental slip I think!Although the router was only pushing around...

jwbensley commented on DNS server process, high CPU usage in Other Network Infrastructure Subjects 4 years ago

Hi Aleksandar,Did you ever find a resolution to your problem? I have just experianed a sustined...

jwbensley commented on Which BGP show command for internal prefix count? in WAN, Routing and Switching 4 years ago

Thank you for showing me this command. That is pretty much what I wanted, and I like the shortened...

jwbensley commented on SOS! Need suggestion for router, ASAP! in WAN, Routing and Switching 4 years ago

It looks to me like you are doing only basic routing so an 800 would suffice at the speeds you...

jwbensley commented on Comparing ASA configs in Firewalling 4 years ago

Diff is my favourite by a long way http://en.wikipedia.org/wiki/Diff

jwbensley commented on ASA5505-UL-BUN-K9 - Is This Appropriate in Firewalling 4 years ago

Thanks for clearing those points up for me, that's what I needed to know. That gave me the...

jwbensley commented on Which QoS method and commands do I require? in WAN, Routing and Switching 4 years ago

Forgot to mention; It's an 1841 with c1841-advipservicesk9-mz.124-25e.bin

jwbensley commented on Difference in these two line cards? in LAN, Switching and Routing 4 years ago

Hi Joseph,Thanks for clearing that up.I understand this part; "If you understand switched Ethernet...

jwbensley commented on Frequent High CPU load in Cisco 7609 Routers. in LAN, Switching and Routing 4 years ago

Can you look at the "show processes cpu sorted" and "show processes memory sorted" commands during...

jwbensley commented on Difference in these two line cards? in LAN, Switching and Routing 4 years ago

HI Leo,I'm trying to document some spare lines cards I have. I have a further question now though...

jwbensley commented on Difference in these two line cards? in LAN, Switching and Routing 4 years ago

Thanks for your response Joseph Doherty. This has cleared some things up for me and given me more...

jwbensley commented on MPLS options at company HQ in LAN, Switching and Routing 4 years ago

Well, the only way the private data inside the HQ LAN can talk to the equipment in your colo...

jwbensley commented on MPLS options at company HQ in LAN, Switching and Routing 4 years ago

As per your diagram, the firewall is connected to a switch, which the router is also connceted to,...

jwbensley commented on Cisco 7600 Static Route ECMP Failover Issue in LAN, Switching and Routing 4 years ago

Hi Eric,You said you are getting the following output even when Gi1/21 for example is unplugged;...

jwbensley commented on MPLS options at company HQ in LAN, Switching and Routing 4 years ago

You can drop your IPSEC tunnel to the colo environment into a VRF, you just need a way to route...

jwbensley commented on PFR in WAN, Routing and Switching 4 years ago

Hi Mukesh, Can you re-write your question, it doesn't make any sense and it's not obvious what you...

jwbensley commented on QinQ & MPLS Layer 2 in WAN, Routing and Switching 4 years ago

If everything works OK when only one remote site is conneted to the HQ, and both sites are...

jwbensley commented on Fixed my own xconnect, but how? in WAN, Routing and Switching 4 years ago

Thanks for the recommendation Kishore, I will be getting a copy of this book ASAP Cheers!

jwbensley commented on Console Authentication Failed in Remote Access 4 years ago

Hi Andrew,Thanks for the input but unfortunately I'm still stumped! I can't see why it wouldn't...

jwbensley commented on Fixed my own xconnect, but how? in WAN, Routing and Switching 4 years ago

I have marked Peters answer as correct, as he is correct in that I am wrong This pseudowire should...

jwbensley commented on Do all switches have to support QinQ? in LAN, Switching and Routing 4 years ago

Thank you for the prompt response

Bio












jwbensley's Stats

Points5
Discussion started 37
Answers marked as Correct 1
Endorsed 0
Content Rated 32