Kimberly Adams

Member Since: Mar 09, 2010

English
Kimberly Adams commented on CRC errors increasing, but pingtests are 100% ok! in WAN, Routing and Switching 3 years ago

Remco,I hate to aske the obvious here, but I have seen a lot of these kinds of issues being...

Kimberly Adams commented on Use of bookmarks of resources which are located behind a S-to-S VPN in Firewalling 3 years ago

Jeroen,Is this a remote access SSL VPN?  If it is, are you tunneling everything and also do you get...

Kimberly Adams commented on VPN DMZ connectivity in Firewalling 3 years ago

Yes a site to site VPN would be the best way to set this up.  You can restrict down to just the...

Kimberly Adams commented on Second Public IP on ASA 5510 in WAN, Routing and Switching 3 years ago

Kumar,If you have a single inside host that needs to be a different public IP address you can do...

Kimberly Adams commented on Second Public IP on ASA 5510 in WAN, Routing and Switching 3 years ago

Kumar,Can you please post your configuration?  Depending on how your configuration looks, you may...

Kimberly Adams commented on inside user initiates connection to vpn user in VPN 3 years ago

This didn't automatically work due to the firewall is setup to block or deny traffic, until it is...

Kimberly Adams commented on WS-C2960S-24TS-L and CRC errors in LAN, Switching and Routing 3 years ago

Hello,What does the speed and duplex configurations look like between the 2960S and the ALCOMA?  It...

Kimberly Adams commented on Motivational Poster - Hope y'all like it. :-) in Cisco Cafe 3 years ago

Leo,My new job....for almost a year now has been very demanding.  But I am back and hopefully won't...

Kimberly Adams commented on HA between routers 2911 in WAN, Routing and Switching 3 years ago

Matt,Here is some of the information for this: Network Diagram This document uses the network setup...

Kimberly Adams commented on HA between routers 2911 in WAN, Routing and Switching 3 years ago

Matt,Here is a link for the basics of configuring HSRP:http://www.cisco.com/en/US/customer/tech/...

Kimberly Adams commented on HA between routers 2911 in WAN, Routing and Switching 3 years ago

Matt,Yes HSRP would be the best way to have HA and failover to the R2 and WAN2.  You would need to...

Kimberly Adams commented on Motivational Poster - Hope y'all like it. :-) in Cisco Cafe 3 years ago

Leo,These are just priceless!  I am a little worried about the public fistings...... LOLThanks and...

Kimberly Adams commented on Cisco ASA 5512-X in VPN 3 years ago

David,All the Cisco ASAs come with the default 2 user license for AnyConnect/SSL VPN users, but if...

Kimberly Adams commented on Can Collisions occur when using Twisted pair cable in LAN, Switching and Routing 4 years ago

The easiest way to understand this is the nature of half duplex is one-way at a time communications...

Kimberly Adams commented on Slow network, where do I start? in LAN, Switching and Routing 4 years ago

Andy,Have you tried setting up the packet capture on the ASA?  Also, I would look at some of your...

Kimberly Adams commented on Input errors, overruns, and input reset drops on 10Gig interface in Firewalling 4 years ago

Lyron,Is this your "inside or LAN" interface?  What are the speed and duplex settings of the...

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

Mike,That is so funny and I loved the SNMP trap for the low T.P.!  +5 for you....just for making me...

Kimberly Adams commented on nexus 5000 noobie in LAN, Switching and Routing 4 years ago

Glen,Yes these switches are a little different.  To answer your question you can set the IP like...

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

Leo,I see you completely understand what I was going for!!!!Thanks and Cheers! Kimberly

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

Thanks to Leo and Huff for the congrats!Really liking the new job so far.  I will let you both know...

Kimberly Adams commented on Switches Supported with RPS2300 in LAN, Switching and Routing 4 years ago

Thanks Andrew.We all can't be here all the time to answer everyone's questions!  Have a good day....

Kimberly Adams commented on Switches Supported with RPS2300 in LAN, Switching and Routing 4 years ago

Everyone,I did happen to find the answer to my question talking to Cisco PSE.  All 3750 series...

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

Hey Huff!REALLY a "JIBBLET"??????  LOL!  That is some funny stuff.  I should have some new ones...

Kimberly Adams commented on show conn in cisco asa in Firewalling 4 years ago

With the show conn on the ASA, it does take all the connections and add them up for you.  This will...

Kimberly Adams commented on uio in Firewalling 4 years ago

In my experience a good connection will have the flags UIO.  Which is the following:U = upI =...

Kimberly Adams commented on uio in Firewalling 4 years ago

For a quick and easy view of what the flags are showing in the connections, I use the following...

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

OMG....this made me giggle!  +5 for the marshmellows!Love it Leo.Cheers.Kimberly

Kimberly Adams commented on Switch port being reset for multiple times everyday in LAN, Switching and Routing 4 years ago

Hey Tony,When it comes to speed and duplex settings between two devices, if it is currently in...

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

I remember another call I received from one of my field engineers from a site and the conversation...

Kimberly Adams commented on Funny user trouble reports in Cisco Cafe 4 years ago

Hey Huff,Yeah you got to love the user questions.  I was working in a Tier2/3 call center and one...

Kimberly Adams commented on Switch port being reset for multiple times everyday in LAN, Switching and Routing 4 years ago

Tony,Are there any errors or anything on the switchport that you can see, like a show interface g4/...

Kimberly Adams commented on ASA IOS 8.2 compatibility in Firewalling 4 years ago

On the 5510 you can run 8.2(1), 8.2(2), 8.2(3), 8.2(4), and 8.2(5) versions of software.Thanks and...

Kimberly Adams commented on Issue with second serial interface disappearing in WAN, Routing and Switching 4 years ago

Anthony,Can you please post the configuration of your router?  Also when the first one "drops" are...

Kimberly Adams commented on ASA 5510 VPN Client RADIUS authentication issue in VPN 4 years ago

This may have something to do with the timeout settings or deadtimer configured with the firewall...

Kimberly Adams commented on Wireless Router off of ASA 5510? in LAN, Switching and Routing 4 years ago

What is the purpose of the wireless router and what are you really looking to do?  Once this is...

Kimberly Adams commented on access-list on ASA in Firewalling 4 years ago

When you have a lot of access-lists, Scenario 2 will be a faster process.  When ever someone makes...

Kimberly Adams commented on Unable to NAT to Internet (Cisco 2901) in LAN, Switching and Routing 4 years ago

I see you have access-groups applied to both interfaces, but do not see the matching access-lists...

Kimberly Adams commented on communication between same security levels in ASA in Firewalling 4 years ago

You can also add the following commands to allow the same security interface to talk to each other:...

Kimberly Adams commented on Static NAT required but the Outside NAT pool already exhuasted in Firewalling 4 years ago

You may want to post some of your configuration for a better idea of what is going on.  Also check...

Kimberly Adams commented on access-list on ASA in Firewalling 4 years ago

Scenario 2 is much better and easier for management on the firewall.  If you need to add another...

Kimberly Adams commented on <sigh> Bean counting managerial fsck-ups! in Cisco Cafe 4 years ago

Darren,Yeah exactly and that is some of the reason I am looking for employ elsewhere right now!  It...

Kimberly Adams commented on Beginer NAT question in Firewalling 4 years ago

GTG,Yeah that is how it use to be in OS versions earlier then 8.3.  Now they require the object-...

Kimberly Adams commented on ASA Xlate limits in Firewalling 4 years ago

Mark,I have not found anything about the XLATES, but the following gives you the basics about how...

Kimberly Adams commented on Transitioning away from ATM in WAN, Routing and Switching 4 years ago

Are you running the drop and insert configuration on the routers due to having a PBX system that...

Kimberly Adams commented on <sigh> Bean counting managerial fsck-ups! in Cisco Cafe 4 years ago

+5 for both of you and your stories.  I hate to say it but I did laugh and actually almost snotted...

Kimberly Adams commented on How to create a access rule to connect to a system using RDP in Firewalling 4 years ago

Brandon,It may help us if you could post your configuration.  It will help to see all the access-...

Kimberly Adams commented on Advice on MPLS in WAN, Routing and Switching 4 years ago

Liam,You and the provider works out how you want the MPLS setup.  This company has their MPLS setup...

Kimberly Adams commented on Advice on MPLS in WAN, Routing and Switching 4 years ago

Liam,A lot of companies are going this direction with MPLS for their many sites to be able to...

Kimberly Adams commented on I can not to connect to nated address in Firewalling 4 years ago

Peter,Have you tried running a packet capture while trying to connect?Thanks,Kimberly

Kimberly Adams commented on I can not to connect to nated address in Firewalling 4 years ago

Peter,Are you seeing any deny's in the log files?  This kind of smells like someting is being...

Bio

I have been in the IT industry for about 20 years and working with Cisco products for the last 16. I started out as a PC Support Tech/Network Administrator with Novell servers and a little bit of Microsoft. Once I started getting into Cisco Networking, I found my passion and calling. Before IT, I was board and unchallenged with nothing new to learn. Now I have so much to learn and room for growth.
=====
I have worked my way through the support ranks into Network Engineering and Security. I have worked on small to large networks and all of them seem to be a little different and bring a new challenge.
=====
I am currently a Network Security Engineer for HP Enterprise Services.











Kimberly Adams's Stats

Points308
Discussion started 8
Answers marked as Correct 14
Endorsed 0
Content Rated 58