English
Keny Perez's Activity on Cisco Support Community
Currently displaying 50 results

Keny Perez has commented on Is it good to have few Chassis with 2204 IOM and few others with 2208 IOM? Is it supported configuration?

3 weeks 5 days ago
If you mean to ask for some chassis with 2204s and some other chassis with...

Keny Perez has commented on UCS C220 M4 FlexFlash Slot 1 Write disabled

1 month 1 week ago
What is the CIMC version you are running? You may be hitting https://bst....

Keny Perez has commented on Associating Service Profile error

1 month 1 week ago
Try to pull KVM from UCSM and go to BIOS and set the BIOS settings to factory...

Keny Perez has commented on B200M4 vic1340 Fabric Failover with load sharing for Windows 2012 Bare Metal OS

2 months 1 day ago
FYI: https://support.microsoft.com/en-us/kb/3137691  "LBFO Dynamic...

Keny Perez has commented on B200M4 vic1340 Fabric Failover with load sharing for Windows 2012 Bare Metal OS

2 months 1 day ago
Catalyst dont support vPC but VSS is the same idea, so you can use the same...

Keny Perez has commented on CISCO Blade Low in support

2 months 2 days ago
So according to the PID, these are 4K sectors disks... I think Kirk answer that...

Keny Perez has commented on B200M4 vic1340 Fabric Failover with load sharing for Windows 2012 Bare Metal OS

2 months 2 days ago
Then in UCSM manager you would create a Service Profile with some vNICs going...

Keny Perez has commented on Is Service Profile Association Automation is possible?

2 months 2 days ago
correct!  it is still valid, we do not support that kind of failover......

Keny Perez has commented on B200M4 vic1340 Fabric Failover with load sharing for Windows 2012 Bare Metal OS

2 months 2 days ago
Are you planning on doing "Fabric Failover with load sharing between all the...

Keny Perez has commented on How to configure the Local Hardisk of new Cisco Blade Server UCS B200 M4

2 months 2 days ago
Can you post an screenshot of the "Configured Boot Order" tab?  and also...

Keny Perez has commented on CISCO Blade Low in support

2 months 2 days ago
On top of what Kirk is asking you to check (I am talking about checking if the...

Keny Perez has commented on Getting multiple UCSC-C220-M35 warnings all of a sudden?

2 months 1 week ago
What is your CIMC version? Can you reset CIMC and see if the errors clear? It...

Keny Perez has commented on GUI bug in UCS Manager 3.1 (1e)

2 months 2 weeks ago
CSCuy67567   UCSM HTML 5- resize toggle doesnt resize the VLAN pane...

Keny Perez has commented on GUI bug in UCS Manager 3.1 (1e)

2 months 2 weeks ago
wrmalik11,  I can see that in my lab too; I will file an enhancement bug...

Keny Perez has commented on job status clarification

2 months 2 weeks ago
I think you got this posted in the wrong community/section of the community......

Keny Perez has commented on Cisco UCS C220 M4S with ESXi losing configuration changes

2 months 2 weeks ago
jagielski,  Was your issue about ESXi losing the configuration changes?...

Keny Perez has commented on UCS C240M4S SSH response very slow

2 months 2 weeks ago
mtiger,  There is a bug on CIMC memory leak that MIGHT be affecting you (...

Keny Perez has commented on UCS error accessing shared storage F0863

2 months 2 weeks ago
whitdept33, you can also take a look at my post here: https://supportforums....

Keny Perez has commented on Cisco UCS "Configure Evaluate Association"

2 months 2 weeks ago
Pleasure to help...  You have a nice day too. -Kenny

Keny Perez has commented on Cisco UCS "Configure Evaluate Association"

2 months 2 weeks ago
ok.. TAC can do some live debugging of internal communication to see where the...

Keny Perez has commented on Cisco UCS "Configure Evaluate Association"

2 months 2 weeks ago
I can give you some commands to get the output of the DME and other internal...

Keny Perez has commented on Cisco UCS "Configure Evaluate Association"

2 months 2 weeks ago
Are you using UCS Central? and do you see any pending activities in UCSM...

Keny Perez has commented on Cisco UCS "Configure Evaluate Association"

2 months 2 weeks ago
where do you see the vlan is not added?  are you checking the running...

Keny Perez has commented on Can't access Cisco IMC on c240 m4 server

2 months 2 weeks ago
For future users to know the "why" of this: http://www.cisco.com/c/en/us/...

Keny Perez has commented on Cisco UCS "Configure Evaluate Association"

2 months 2 weeks ago
Can you go to the General tab, pull KVM and see what the server is really doing...

Keny Perez has commented on Combination of VIC 1240 + 1280 with Fex 2208 giving 20 GB per interface of ESXi. Why?

2 months 4 weeks ago
This will explain it all while the "KR" portion also gets cleared: http://blog....

Keny Perez has commented on Cluster state: warning F0865 device shared storage error

3 months 2 days ago
Was this info helpful Walter? -Kenny

Keny Perez has commented on Fabric Interconnect 6332 and 6332-16UP

3 months 5 days ago
http://ucsguru.com/2016/02/02/cisco-ucs-generation-3-first-look/ -Kenny

Keny Perez has commented on Hardware monitoring of UCSC-C220-M4S by the Cisco UCS Manager ?

3 months 5 days ago
This thread is a duplicate of: https://supportforums.cisco.com/discussion/...

Keny Perez has commented on Is it possible to monitored the hardware level of C220-M4S with UCS Manager ?

3 months 5 days ago
UCSM will monitor the hardware of a server, no matter if it is a B or C series...

Keny Perez has commented on Cluster state: warning F0865 device shared storage error

3 months 6 days ago
Walter, To begin, shared storage is on each chassis midplane, that is why you...

Keny Perez has commented on Combination of VIC 1240 + 1280 with Fex 2208 giving 20 GB per interface of ESXi. Why?

3 months 1 week ago
Yes, this is expected if you dont have a port-expander: http://www.cisco.com/c...

Keny Perez has commented on Fabric Interconnect // CRC errors on IO module Fabric ports ( Fabric-A ) only

3 months 1 week ago
np, keep us updated. -Kenny

Keny Perez has commented on Fabric Interconnect // CRC errors on IO module Fabric ports ( Fabric-A ) only

3 months 1 week ago
Have they told you if they are stomp or not-stomp CRC errors? -Kenny

Keny Perez has commented on Finding DHCP assigned IP address for CIMC

3 months 1 week ago
How about a packet capture ;) -Kenny

Keny Perez has commented on Fabric Interconnect // CRC errors on IO module Fabric ports ( Fabric-A ) only

3 months 1 week ago
Most important thing will be to confirm the CRC counters are going up so that...

Keny Perez has commented on UCSM / HA broken after upgrade 2.0.1q -> 2.0.5c

3 months 3 weeks ago
Console in to the "Inaaplicable" FI and if you are hard down, try a reboot of...

Keny Perez has commented on Installing N1K VSM on vCenter 5.5 with IPv6 only

4 months 2 weeks ago
For  other users: Updated as of Dec 03, 2015 http://www.cisco....

Keny Perez has commented on UCS 5108 Firmware Upgrade from 2.2(1b) to 2.2(6e) - B Series

4 months 3 weeks ago
duplicate of https://supportforums.cisco.com/discussion/12738496/ucs-5108-...

Keny Perez has commented on windows 2016 operating system installation in cisco ucsc240 m4 server

4 months 3 weeks ago
If not supported, you can have many untested outcomes and we will not be able...

Keny Perez has commented on how to read the ucs tech support logs

4 months 3 weeks ago
Hello, Like Kirk said, we do not have a cook book to show where to look for...

Keny Perez has commented on Upgrade from 6248 to 6296 Fiber Interconnect

4 months 4 weeks ago
correct and correct... about not having licenses... Wes already answered that...

Keny Perez has commented on Upgrade from 6248 to 6296 Fiber Interconnect

5 months 4 days ago
Just to add more clarity on what will happen. The licenses are bound to a Host...

Keny Perez has commented on

5 months 4 days ago
If that answered your question.. could you please mark it as such for other...

Keny Perez has commented on Cisco UCS C220 M3 SFF and Windows Server 2012 R2 Datacenter

5 months 1 week ago
Please mark the question as "answered" for future users with the same query...

Keny Perez has commented on UCS C200 M2 HD Error

5 months 1 week ago
Hi, If it is a legit hardware failure, you need a replacement but we cant tell...

Keny Perez has commented on Nexus 1000v Switch shows vethernet port are blocked in VEM after reboot VSM and VEM together or Deleted and add it back

5 months 1 week ago
thanks for the feedback.. you have the BUG ID by any chance? -Kenny

Keny Perez has commented on Move from FC Switch to End Host Mode

5 months 1 week ago
ok, well still will be disruptive as FIs will reboot. The FIs mode should be...

Keny Perez has commented on Move from FC Switch to End Host Mode

5 months 2 weeks ago
Hey Walter, I dont remember at this point but the change reboots the FIs so it...

Keny Perez has commented on Cambiar Fabrics de modo FC switch mode a FC end host mode

5 months 2 weeks ago
Hola, Espero ya hayas encontrado como validar esto pero para usuarios futuros...

Bio

Engineer of the Server Virtualization team in TAC since 2011










Keny Perez's Stats

Points1861
Discussion started 3
Answers marked as Correct 172
Endorsed 9
Content Rated 483