krun_shah

Member Since: Aug 27, 2006

English
krun_shah commented on CSCuw03144 - OpenSSH Evaluation of Multiple OpenSSH CVEs for NX-OS in LAN, Switching and Routing 10 months ago

Interesting reply. How many of those versions are available for download, only 1. That version is...

krun_shah commented on Will UCS Manager be dumping Java? in Unified Computing 2 years ago

Note that UCS manager is not the Java GUI that we see. UCS manager is DME,MIT and XML. Using java...

krun_shah commented on Prerequisites for IPv6 on Nexus 7000 in IPv6 Integration and Transition 2 years ago

5.2(9) is most stable code. N7K-M132XP-12 is end of support but you do not need to through it you...

krun_shah commented on IPv6 testbed in IPv6 Integration and Transition 2 years ago

Have you think about using LISP? if you register now you will get a /48 IPv6 prefix and /28 IPv4...

krun_shah commented on IPv6 - Frequently Asked Questions (FAQ) in IPv6 Integration and Transition 2 years ago

If dual stack is not good option for you you may want to build pure IPv6 network with Stateless IP/...

krun_shah commented on Quad sup2T VSS redundancy in LAN, Switching and Routing 2 years ago

But with only in-chassis redundancy domain there is no SSO.

krun_shah commented on Quad sup2T VSS redundancy in LAN, Switching and Routing 2 years ago

According to following default redundancy domain is always accross chassis. http://www.cisco.com/en...

krun_shah commented on LISP IPv4 EID as NAT64 in IPv6 Integration and Transition 2 years ago

No help. MHS-CSR1000v-test#config tEnter configuration commands, one per line.  End with CNTL/Z.MHS...

krun_shah commented on LISP IPv4 EID as NAT64 in IPv6 Integration and Transition 2 years ago

I do not want that packet to drop I want to decapsulate LISP packets destined to 153.16.31.82 then...

krun_shah commented on Nexus 5548UP/2232PP/FCoE in Storage Networking 3 years ago

Assuming FEXes are already connected and operational. Nexus 5548 cannot run in NPV mode. You have...

krun_shah commented on Nexus 5548UP/2232PP/FCoE in Storage Networking 3 years ago

You should be able to find all your answers in FCoE configuration guide. http://www.cisco.com/en/US...

krun_shah commented on Fex and VPC in Server Networking 3 years ago

1) It does not matter if you have same FEX number on both switches. However, This will be a...

krun_shah commented on FCOE on Nexus 7000 & Nexus 5000 in Server Networking 3 years ago

You can move all you access layer to Converged ethernet using new CNAs  in server connecting them...

krun_shah commented on QoS colouring Nexus 5500 - no matches on ACL in Server Networking 3 years ago

Try show policy-map interface po 41show queueing interfacehttp://www.cisco.com/en/US/docs/switches/...

krun_shah commented on Nexus 5010 sfp in Server Networking 3 years ago

Datasheet Table 2. Cisco Nexus 5000 Series Transceiver Support Matrixhttp://www....

krun_shah commented on CCIE DC in Server Networking 3 years ago

Join the club here

krun_shah commented on iSCSI & Server LAN Traffic in Same Trunk Port in Server Networking 3 years ago

Yes doable. Also you can mark iSCSI with cos 2 and 9000 MTU with certain badwidth gaurantee for...

krun_shah commented on VSM doesnt see VEM for Newly added ESXi 5.1 in Server Networking 3 years ago

NExus 1000v VSM and VEM with version 4.2(1) SV1.5(2) support ESXi5.1. If you are using Layer 2 mode...

krun_shah commented on Nexus 7018 as Server Access in Server Networking 3 years ago

Top of the rack with nexus5500 and 2000 is generally consifered a good idea becaus ease of cabling...

krun_shah commented on MDS 9124 and F Port Channels in Unified Computing 3 years ago

Looks like it does support f port channeling with npv switch like fabric interconnect see table 2...

krun_shah commented on MDS 9124 and F Port Channels in Unified Computing 3 years ago

Looks like it does supports f port channeling but only with edge deployement see table 2 in below...

krun_shah commented on SAN design : core edge and dual-homing access switch in Storage Networking 3 years ago

Answer also from LAN guy,Most likely this design diagram is due to assumption that there is no use...

krun_shah commented on High CPU usage BGP router process in WAN, Routing and Switching 4 years ago

I would try one more thing, which is to put my 2 IBGP neighbors into a peer-group, that way BGP...

krun_shah commented on High CPU usage BGP router process in WAN, Routing and Switching 4 years ago

Yes You are right we are not seeing issue during neighbor establishment process. debug bgp updates...

krun_shah commented on DCHP discover packet rate-limiting in LAN, Switching and Routing 4 years ago

How about enabling dhcp snooping on edge switch and enabling dhcp snooping rate limiting on layer 2...

krun_shah commented on CNA QOS options? in Server Networking 4 years ago

USe predefined policy maps. It matches frames with cos 3 and allocates 50% bandwidth for FCoE...

krun_shah commented on Nexus 1000v UCS Manager M81KR in Server Networking 4 years ago

Since you have defined switchport mode access vlan 100 on uplink port-profile of Nexus 1000v, it...

krun_shah commented on is there a way that i can get installation software for virtual nexus for practice in Server Networking 4 years ago

Ucs emulatorhttp://developer.cisco.com/web/unifiedcomputing/ucsemulatordownloadFree trial of...

krun_shah commented on New to MDS_vSAN in Storage Networking 4 years ago

I would say to create one vsan with a different number on each switch. e.g. VSAN 10 on MDS 1 and...

krun_shah commented on Which SFP can we used to connect B22HP to Nx5500 ??? in Server Networking 4 years ago

• Fiber: SFP+ optics (FET-10G, SFP-10G-SR, and SFP-10G-LR) •  Copper: 10 Gigabit Ethernet SFP+...

krun_shah commented on MDS 9148 NX-OS 5.0(1a) Link failure Problem in Storage Networking 4 years ago

Are those ISL ports? What is connected to those ports? Collect following and post it heresh int fc1...

krun_shah commented on Nexus 5048P with HP FLex-10 in Server Networking 4 years ago

You only need to configure any fiber channel related command if you are using it as a FCF like...

krun_shah commented on Configure Nexus 5548 as FCoE Pass Through in Storage Networking 4 years ago

Nexus 5548 cannot be a FIP snooping bridge. It can only be a Full FCF with E_ports and VE_ports OR...

krun_shah commented on Configuring VEM without VSM in Server Networking 4 years ago

In that case you can use vswitch from vmware but you loose nx-os cli features since it requires...

krun_shah commented on Question On VPC On 5596 in Storage Networking 4 years ago

vpc # has to be same on both peers. Also there is no reason you should not keep port-channel number...

krun_shah commented on Nexus 7K secondary sup in powered-up State in Server Networking 4 years ago

Check if there is coredump file using show core command and export to tftp/scp/ftp server.check...

krun_shah commented on Nexus 7K Module N7K-F248XP-25 showing powered-dn in Server Networking 4 years ago

Make sure you have module 4 is in same VDC as module 3 or in its own dedicated F2 only VDC. If so...

krun_shah commented on Nexus 5548: Tac-Pac asking for password in Server Networking 4 years ago

What role does your username has? is it network-admin? See "show role" and see if tac-pac command...

krun_shah commented on VM-FEX with Nexus 5500 in Server Networking 4 years ago

Also one more thing,After vpc primary switch came up and became operational secondary none of the...

krun_shah commented on UCS - san-port-channel over vpc in Unified Computing 4 years ago

This is not possible. Vpc is layer 2 only ethernet port channel. San port channel cannot be built...

krun_shah commented on iSCSI and NX-OS in Storage Networking 4 years ago

Also to set up MTU on the SVI vlan interface. Interface vlan 10mtu 9216

krun_shah commented on iSCSI and NX-OS in Storage Networking 4 years ago

I do not think any special needs to be done on a network switch which just switches iscsi frames...

krun_shah commented on Nexus 7K 6.1 code and F2 series module how to enable priority queue for IPT in LAN, Switching and Routing 4 years ago

Here is cofiguration guide for qoshttp://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/...

krun_shah commented on Connecting 4 Nexus 2000 with Nexus 7000 in Server Networking 4 years ago

Yes this looks good design with redundancy. It also follows all F2+FEX rules.

krun_shah commented on Regarding Contexts IN ACE in Application Networking 4 years ago

A single ace device can be partitioned into multiple virtual appliance each managed as independent...

krun_shah commented on Connecting 4 Nexus 2000 with Nexus 7000 in Server Networking 4 years ago

Here you go http://www.netcraftsmen.net/component/content/article/69-data-center/128...Sent from...

krun_shah commented on Nexus 5596UP and Nexus 4001I in Storage Networking 4 years ago

Nexus 4000 Configuration guide. http://www.cisco.com/en/US/docs/switches/datacenter/nexus4000/...

krun_shah commented on Nexus 7k and VPC to 3750X in LAN, Switching and Routing 4 years ago

Eg. If you have 5 switches in a stack with tengig uplink module you can conmect one 10gig port out...

krun_shah commented on Nexus 7k and VPC to 3750X in LAN, Switching and Routing 4 years ago

Nexus 7000 with 5.2 code supports 528 portchannels and virtual portchannels http://www.cisco.com/en...

krun_shah commented on What exactly happens when connecting a second Nexus 5548? in LAN, Switching and Routing 4 years ago

I would suggest to set role priority on 5548up so that it does NOT become primary. Manually synch...

Bio










  • Community Spotlight Award

    Doc/Video November 2013









krun_shah's Stats

Points135
Discussion started 9
Answers marked as Correct 21
Endorsed 0
Content Rated 16