manish arora

Member Since: Apr 08, 2010

English
manish arora commented on Strange issue with Anyconnect on 9.0.3 with Radius based authentication. in VPN 8 months ago

are you looking for the ASA side or FR side ? Manish

manish arora commented on RSPAN not Working in LAN, Switching and Routing 1 year ago

Hi Tarek,Can you please try the following on the Access switch (in Maintenance window of course...

manish arora commented on Problem with Nat rule that is changed in WAN, Routing and Switching 1 year ago

Please post output of "Show ip nat translation" & "Show ip nat statis".ThanksManish

manish arora commented on RSPAN not Working in LAN, Switching and Routing 1 year ago

Try removing the Filter packet-type good configuration from your core switch and see if you receive...

manish arora commented on RSPAN not Working in LAN, Switching and Routing 1 year ago

Check the output of "show  vlan remote-span" on all of the switches, out put should show "901" and...

manish arora commented on switchport with access & pvlan in LAN, Switching and Routing 1 year ago

I think the port is in "Access Mode" only, you can check it using :"sh interface g4/36 switchport...

manish arora commented on IKE v1 failing between IPsec VPN client and ASA 9.1(5)12 in VPN 1 year ago

Hi Vickie,I would check the following on the FW :1> Make sure your Transform Set has no more...

manish arora commented on IKE v1 failing between IPsec VPN client and ASA 9.1(5)12 in VPN 1 year ago

would be helpful if you can post the sanitized version of your Firewall's configuration ?...

manish arora commented on Redundant Lan to lan with ASA & routers query in VPN 1 year ago

yup looks good ( I am assuming you have Phase 1 Policies defined as well)  and both phase 1 and...

manish arora commented on Strange issue with Anyconnect on 9.0.3 with Radius based authentication. in VPN 2 years ago

Fixed - Thanks to TAC ( Mr. Luis) :-)"sh vpn-sessiondb detail anyconnect" is your friend.If you...

manish arora commented on backing up config cisco asa in VPN 2 years ago

Your customer's concern is that TFTP isn't secure right ?In that case you can modify your script...

manish arora commented on End to End QoS Questions in WAN, Routing and Switching 2 years ago

By Default, The IOS set Bc = Be if not mentioned in the configuration. Setting Be = 0 is not a...

manish arora commented on What's Wrong with my Configuration? in WAN, Routing and Switching 2 years ago

Looks like you are having issues while negotiating IP Address from the cable company, The "show ip...

manish arora commented on QOS on internet router in WAN, Routing and Switching 2 years ago

The Cisco ASA will preserve the QoS marking while encrypting the traffic i.e they will copy the...

manish arora commented on How to block Internet sharing by MacBook on Cisco Switches Cisco Vulnerability in LAN, Switching and Routing 2 years ago

Not sure if there is any feature to prevent ad-hoc wireless networks originated from a user machine...

manish arora commented on Why are there 1024 available subnets instead of just 4? in WAN, Routing and Switching 2 years ago

172.128.0.0 it's a class B address and you are subnetting it from /16 to /26 which means you are...

manish arora commented on Inter-Vlan Routing to the internet in WAN, Routing and Switching 2 years ago

just create a supernet of your subnets and add that as single route on the router ( I am assuming...

manish arora commented on Web Access With GRE Tunnel in WAN, Routing and Switching 2 years ago

A little more information would be awesome to help you out but I would still try to hit the nail...

manish arora commented on vrrp configuration help in WAN, Routing and Switching 2 years ago

Hi Mukesh,When you have 2 different ISP's feeding you the internet connection with different...

manish arora commented on Dmvpn help in LAN, Switching and Routing 2 years ago

Remove the "network 192.168.20.0" from Hub router EIGRP config and "network 192.168.17.0" from the...

manish arora commented on EIGRP Metric Manipulation issue in LAN, Switching and Routing 2 years ago

As mentioned by Kwillacey, Use the offset list to change the composite metric on the link between...

manish arora commented on Dmvpn help in LAN, Switching and Routing 2 years ago

On the spoke router, The tunnel source interface should be F0/0 rather than F0/1 that you have...

manish arora commented on Multiple Pipe Arguments Within One Show Command? in Firewalling 2 years ago

Not sure if you have "redirect" option after the PIPE command, at least I havn't seen one yet :-)....

manish arora commented on Dynamic and Static PAT using a single public IP in Firewalling 2 years ago

Please post the output of the following :show nat detailshow run natManish

manish arora commented on Cisco IPSEC VPN in VPN 2 years ago

Not sure how to explain this but I will still give it a try, LAN to LAN ipsec doc is what you are...

manish arora commented on Dynamic and Static PAT using a single public IP in Firewalling 2 years ago

That looks correct, just add another static PAT for TCP port 20 as well.Here's a link to a useful...

manish arora commented on ASA Firewall NAT public IP address no NAT in Firewalling 2 years ago

Not exactly sure what your question is but it appears to me you are looking for NoNAT configuration...

manish arora commented on ASA IPv6 Static Command Equivalent in Firewalling 2 years ago

NAT for ipv6 in 8.2(5) is NOT SUPPORTED. You will have to upgrade your device to version 9.0 &...

manish arora commented on Odd inter vlan routing in WAN, Routing and Switching 2 years ago

Ok, The "Traceroute mac xxx xxx" command shows the smallest vlan IP add as a switch id in the...

manish arora commented on Odd inter vlan routing in WAN, Routing and Switching 2 years ago

Logs on SW1 suggests ACL is consuming more memory than allotted by the Cisco. I can see your issue...

manish arora commented on Odd inter vlan routing in WAN, Routing and Switching 2 years ago

Just labbed it up  and I am unable to replicate your problem. Can you shed more light in to your...

manish arora commented on Odd inter vlan routing in WAN, Routing and Switching 2 years ago

Yes it should go from vlan 100 to vlan 200 given everything is configured correctly :-). Would you...

manish arora commented on Why can I ping an APIPA when I'm not in that subnet? in LAN, Switching and Routing 2 years ago

umm interesting, APIPA is link local and shouldn't be communicating besides its local subnet, are...

manish arora commented on 1Gbps Switchport connecting to a switch with 200Mbps Shaping Policy in LAN, Switching and Routing 2 years ago

I hope this would work ( please adjust your ACL and traffic bandwidth as per your need ) :class-map...

manish arora commented on NAT with one inside and two outside interfaces in WAN, Routing and Switching 2 years ago

Alain's answer is the correct solution at least as per the doc's :-)  for multiple PAT interfaces...

manish arora commented on switchport trunk allowed - Cisco / HP in LAN, Switching and Routing 2 years ago

yes, you can assume that the Cisco switch is not forwarding anything from itself to towards HP for...

manish arora commented on 1Gbps Switchport connecting to a switch with 200Mbps Shaping Policy in LAN, Switching and Routing 2 years ago

what kind of switch/router you are using that is connecting to the interlink ? you can use MQC...

manish arora commented on ARP between 2 trunk ports in LAN, Switching and Routing 2 years ago

Are you running the TCPDUMP on the correct interface on server 2, the port should be in correct...

manish arora commented on CCNP Lab in LAN, Switching and Routing 2 years ago

If you dont like GNS3 than try Web-IOU ( search online for more info on it)  and of course Real...

manish arora commented on AAA Config Questions in LAN, Switching and Routing 2 years ago

The command "aaa authentication password-promt PASSCODE" will change the prompt from default of...

manish arora commented on CCNP Lab in LAN, Switching and Routing 2 years ago

why don't you use just the switch for switching labs & use GNS  for practicing your routing...

manish arora commented on AAA Config Questions in LAN, Switching and Routing 2 years ago

whats exactly you are trying to do with AAA ? you want to set up SSH access via aaa or something ?...

manish arora commented on Trouble with Access Rules in WAN, Routing and Switching 2 years ago

Ok the problem is with the order of the NAT statements in this new version of Cisco asa IOS. I will...

manish arora commented on Trouble with Access Rules in WAN, Routing and Switching 2 years ago

Please also run the following command & copy paste the output :#packet-tracer input outside tcp...

manish arora commented on Trouble with Access Rules in WAN, Routing and Switching 2 years ago

Can you please post the output of "show nat detail" ? Also, you can use "clear xlate" to clear old...

manish arora commented on Trouble with Access Rules in WAN, Routing and Switching 2 years ago

I don't see 8082 open on the firewall which is strange since you have the configuration present on...

manish arora commented on Trouble with Access Rules in WAN, Routing and Switching 2 years ago

send it to techmediaexperts at gmail .Manish

manish arora commented on Trouble with Access Rules in WAN, Routing and Switching 2 years ago

I dont see anything wrong in your configuration, would you PM me your public IP so I check|nmap...

manish arora commented on Multihomed eBGP load balancing with 3 ISP's in WAN, Routing and Switching 2 years ago

Hi G Robinson,You can have multiple type of policies configured with BGP and you can manipulate how...

Bio












manish arora's Stats

Points580
Discussion started 20
Answers marked as Correct 77
Endorsed 2
Content Rated 53