Patrick McHenry

Member Since: Oct 09, 2009

User Badges:

English
Patrick McHenry commented on 2911 bandwidth limitations in WAN, Routing and Switching 1 month ago

Thanks Joseph - correct with the 4Ks. That is what we are using now at most of our sites. And the...

Patrick McHenry commented on 2911 bandwidth limitations in WAN, Routing and Switching 1 month ago

So by table 2s recommendation, it will only support 62.5 Mbps Full duplex? I didn't see a half...

Patrick McHenry commented on 2911 bandwidth limitations in WAN, Routing and Switching 1 month ago

So WAN.png appears to show how a consumer should pick a router based on using QoS.....2911 125 Mbps...

Patrick McHenry commented on 2911 bandwidth limitations in WAN, Routing and Switching 1 month ago

After reading the doc closer, it appears there are all these caveats... They explain how voice...

Patrick McHenry commented on 2911 bandwidth limitations in WAN, Routing and Switching 1 month ago

Thanks for the feedback... Why would you consider it undersized? To me this document makes it...

Patrick McHenry commented on Boot Statement vs flash:/packages.conf in LAN, Switching and Routing 3 months ago

Thanks John, but no...nobody has modified the switch after I installed the new image. This is what...

Patrick McHenry commented on L3 Roam using Flex Connect in Getting Started with Wireless 6 months ago

Thanks Scott, ....so, there is no hack around this limitation? Someone told me it was possible and...

Patrick McHenry commented on Remote Site Having Wifi Slowness in Wireless IP Voice and Video 8 months ago

Here is some show client info: Client MAC Address............................... 7c:7a:91:bf:33:...

Patrick McHenry commented on Differnet QoS configs and their outputs in WAN, Routing and Switching 8 months ago

Thanks for your response - I think I need to hit the books on QoS...started reading the new End to...

Patrick McHenry commented on Remote Site Having Wifi Slowness in Wireless IP Voice and Video 8 months ago

Here is the WLAN and sysinfo: (Cisco Controller) >show wlan 1WLAN Identifier...

Patrick McHenry commented on Remote Site Having Wifi Slowness in Wireless IP Voice and Video 8 months ago

Thanks Rasika I will be sure to post the "show client" when the user is experiencing issues....

Patrick McHenry commented on Remote Site Having Wifi Slowness in Wireless IP Voice and Video 8 months ago

Thanks Rasika for your response. Could you explain what you mean by "all values in number 3"? I...

Patrick McHenry commented on Differnet QoS configs and their outputs in WAN, Routing and Switching 8 months ago

The first router is a 2911/K9 running 15.2(4)M6a The second router is a ISR4331/K9 running 15.5(2)S...

Patrick McHenry commented on QoS Shaper and Fractional Circuits in WAN, Routing and Switching 9 months ago

Thanks for the reply Joseph So it I understand correctly, and I realize we are usually bound to...

Patrick McHenry commented on Shutting off NTP on Specific interfaces in WAN, Routing and Switching 9 months ago

Feel like I am beating a dead horse - sorry man. One more question.... when creating the access-...

Patrick McHenry commented on Shutting off NTP on Specific interfaces in WAN, Routing and Switching 9 months ago

Oh - one other question.... If I wanted to make sure my remote site network devices did not serve...

Patrick McHenry commented on Shutting off NTP on Specific interfaces in WAN, Routing and Switching 9 months ago

Thanks for the explanation - that really helped my understanding!!! As far as the second paragraph...

Patrick McHenry commented on Shutting off NTP on Specific interfaces in WAN, Routing and Switching 9 months ago

Thanks for the response...What do you think of this?HQ:config t!access-list 1 permit x.x.x.x 0.0.0....

Patrick McHenry commented on 38021 APs issues with code set 8.2.111.0 in Getting Started with Wireless 9 months ago

We've decided to go back to 8.2.100.0. This was the stable image we were running before trying to...

Patrick McHenry commented on 38021 APs issues with code set 8.2.111.0 in Getting Started with Wireless 10 months ago

Jagan, Thanks for the input... CSCuz45986....this one is based on a 8500 WLC, but still concerns me...

Patrick McHenry commented on 38021 APs issues with code set 8.2.111.0 in Getting Started with Wireless 10 months ago

Leo, Update on the topic: We did go to 8.3.102.0, but found yet another issue with the code that...

Patrick McHenry commented on Color Code on 2348UPQ Fex in Data Center & Virtualization 11 months ago

Found it - 2, yellow ports are for uplink only. 4, Gray/white are for host or uplink So 4, 40G...

Patrick McHenry commented on 38021 APs issues with code set 8.2.111.0 in Getting Started with Wireless 11 months ago

Also, you might find this strange, but when I first brought up the 38021 AP at my desk I had no...

Patrick McHenry commented on 38021 APs issues with code set 8.2.111.0 in Getting Started with Wireless 11 months ago

Thanks Leo - is there a documented, known issue with the 3802i APs and 8.2.111.0 or is your...

Patrick McHenry commented on AIR-AP3802I-B-K9 Power Requirements in Other Wireless - Mobility Subjects 1 year ago

Thanks Rasik - I didnt even think about an upgrade as our current code is so recent.

Patrick McHenry commented on Jumbo frame Config in LAN, Switching and Routing 1 year ago

Thanks Reza - I guess I will find out from the vendor

Patrick McHenry commented on Jumbo frame Config in LAN, Switching and Routing 1 year ago

Thanks Reza, I just did a "show system mtu" and got this output: System MTU size is 1500...

Patrick McHenry commented on Command to Light Up Switch for Identification in LAN, Switching and Routing 1 year ago

Nooooooo....not even 3850s? Thanks

Patrick McHenry commented on SIP to SIP calls over VPN one way audio in IP Telephony 1 year ago

Thanks Mohammed, Routing is fine as all other data traffic and specifically SIP to SCCP calls...

Patrick McHenry commented on SIP to SIP calls over VPN one way audio in IP Telephony 1 year ago

Thanks Dennis Yeah I looked, but nothing seems to fit my situation very closely. Especially over...

Patrick McHenry commented on Permanant Command with Static Routes in LAN, Switching and Routing 1 year ago

Thanks...I'll have to think about it. There is no /16. I think you are confusing the source IP of...

Patrick McHenry commented on Permanant Command with Static Routes in LAN, Switching and Routing 1 year ago

Here is some config... track 100 list boolean or object 101 object 102 object 103!track 101 ip sla...

Patrick McHenry commented on Permanant Command with Static Routes in LAN, Switching and Routing 1 year ago

Thanks for the reply. I can't perform a test for awhile as it is production. One thing though is...

Patrick McHenry commented on UPS sizing for 3850 in LAN, Switching and Routing 1 year ago

I believe 1, 715 will cover our VoIP phones and 2, 37021 APs. Most phones will only be drawing 3.8...

Patrick McHenry commented on Upgrading 4402 Controller from 4.2.207.0 to 7.0.252.0 in Security and Network Management 1 year ago

We have decided not to upgrade. In a couple of months we are getting some new 3702i APs and then we...

Patrick McHenry commented on Upgrading 4402 Controller from 4.2.207.0 to 7.0.252.0 in Security and Network Management 1 year ago

OK George I will load the ER image first. No, there is no backup controller and it is remote (India...

Patrick McHenry commented on Upgrading 4402 Controller from 4.2.207.0 to 7.0.252.0 in Security and Network Management 1 year ago

Yeah we just acquired this company and that is what they have at one of the sites. Planning on...

Patrick McHenry commented on 3850 support for VSS in LAN, Switching and Routing 2 years ago

No Jon I was implying that they were not stacked - just uplinked. So, I guess my diagram is not...

Patrick McHenry commented on 3850 support for VSS in LAN, Switching and Routing 2 years ago

Thanks Jon - my attached paint diagram might explain what I am trying to understand better. Is the...

Patrick McHenry commented on 2911 sufficient for full internet routing table? in WAN, Routing and Switching 2 years ago

Thanks Joe. Then I'm going to assume we are on for now but when we go to 500mbps sec I'm thinking...

Patrick McHenry commented on 2911 sufficient for full internet routing table? in WAN, Routing and Switching 2 years ago

Sorry for throwing this into the mix, but the interface is really not a "WAN "connection - it is an...

Patrick McHenry commented on 2911 sufficient for full internet routing table? in WAN, Routing and Switching 2 years ago

Thanks Joseph I will read the doc - could you point to the area that says the interface limit is...

Patrick McHenry commented on 2911 sufficient for full internet routing table? in WAN, Routing and Switching 2 years ago

I didn't know that the 180Mbps was referring to all of the interfaces. So it is not referring to a...

Patrick McHenry commented on 2911 sufficient for full internet routing table? in WAN, Routing and Switching 2 years ago

Hey - found this doc http://www.cisco.com/web/partners/downloads/765/tools/quickreference/...

Patrick McHenry commented on 2911 sufficient for full internet routing table? in WAN, Routing and Switching 2 years ago

Thanks for both of you getting back Thanks for the confirmation - I was concerned about this myself...

Patrick McHenry commented on Trustsec Without Authentication in AAA, Identity and NAC 2 years ago

Jan -  Will I need a MACsec module or can I perform this between line ports? I was just on the page...

Patrick McHenry commented on how configure Encryption with MACsec switch to switch without ACS server in Other Security Subjects 2 years ago

Hi Jon - Coming in late on this post - must I get a MACsec module to perform encryption between...

Patrick McHenry commented on Mgig? in LAN, Switching and Routing 2 years ago

Thanks for the info - kind of freaks me out a bit Any idea when Mgig will be supported from Cisco...

Patrick McHenry commented on Mgig? in LAN, Switching and Routing 2 years ago

Thanks Leo What new models? Thought the 3850 was top of the line for access?  

Bio

Grew up in Rochester NY. Now living in New Hampshire.

Interests: networking, golf, music....

Love learning new stuff.

User Badges:

Patrick McHenry's Stats

Points61
Discussion started 362
Answers marked as Correct 3
Endorsed 1
Content Rated 864