matthewathom

Member Since: Apr 06, 2004

User Badges:

English
matthewathom commented on SNMPv3 support in EEM Scripting 1 month ago

 I did try and I could not get it to work.  Even with v3 noauth I couldn't get it to work.  The...

matthewathom commented on SNMPv3 support in EEM Scripting 1 month ago

Sorry...I should have specified.  I'm not so much interested in polling but the SNMP ED being able...

matthewathom commented on SNMPv3 support in EEM Scripting 1 month ago

Has there been any movement on this?  Or is v3 still not supported?

matthewathom commented on Trigger an EEM script from a Remote Server and pass data into the script in EEM Scripting 1 month ago

Though the router supports SNMPv3 authPriv, my understanding from what I've found online was that...

matthewathom commented on Trigger an EEM script from a Remote Server and pass data into the script in EEM Scripting 1 month ago

This sounds very similar to an issue I'm trying to resolve. -Matt

matthewathom commented on Match Syslog Pattern With Wildcard in EEM Scripting 4 years ago

That worked.  Thanks for your help.

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

Ok. Thanks for your help. Much appreciated.Sent from Cisco Technical Support iPhone App

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

That was most likely what I saw then.  I was only able to reproduce this delay when it was the...

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

I have been able to successfully trigger the applet today while  utilizing the "." at the end of...

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

I can do that, but I won't be able to do the capture until Wednesday. What IOS and EEM versions are...

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

The only inconsistency is that I have not configured the source address on the receiving router....

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

I was finally able to test this out today, but unfortunately ending with a "." would not trigger...

matthewathom commented on OSPF (Router ID) in Other Network Infrastructure Subjects 4 years ago

The router ID is based on the highest IP address configured on the router unless there is a...

matthewathom commented on EEM Traps Incrementing OID values in EEM Scripting 4 years ago

Ah...ok. I had tried ending it with the integer before ("9") but that hadn't worked.1.3.6.1.4.1.9....

matthewathom commented on EEM Custom Trap to Single Host in EEM Scripting 4 years ago

Ok...thanks for your help.

matthewathom commented on EEM Custom Trap to Single Host in EEM Scripting 4 years ago

If instead of utilizing custom traps I utlized the following: action label snmp-trap...

Bio

User Badges:

matthewathom's Stats

Points5
Discussion started 3
Answers marked as Correct 0
Endorsed 0
Content Rated 4