matt.walls

Member Since: Jul 14, 2006

English
matt.walls's Activity on Cisco Support Community
Currently displaying 50 results

matt.walls has created WAAS OpenSSH, 2003-0386

2 months 4 weeks ago
I am trying to see if this was ever fixed in any version of WAAS (appliances).

matt.walls has created re: WAAS/Central Manager, do WAVE594 NEED connectivity to CM for optimization to another WAV594? can i install CM later?

3 months 4 weeks ago
Can I install the End WAVE appliances and have optimization working, and...

matt.walls has commented on ASR ICMP Debug

1 year 4 months ago
I've seen work with some platform commands, not debug ip *, just can't remember...

matt.walls has created ASR ICMP Debug

1 year 4 months ago
What steps are required to enable ICMP debugs on ASR XE platform.  Debug ip...

matt.walls has created Call Home Source Interface when doing Email Transport

2 years 5 months ago
On ASR/ISR, any call home workarounds known on how to get around not being able...

matt.walls has created Re: ASA in Transparent mode

4 years 11 months ago
If layer 2 on inside of firewall, then just need acl's for IGMP and UDP.  If...

matt.walls has commented on ASA in Transparent mode

4 years 11 months ago
If layer 2 on inside of firewall, then just need acl's for IGMP and UDP.  If...

matt.walls has created Re: ASA 5510 Interface speed/duplex issue

4 years 11 months ago
the other end device is hardcoded at 100/full.  we had it hardcoded on the pix7...

matt.walls has commented on ASA 5510 Interface speed/duplex issue

4 years 11 months ago
the other end device is hardcoded at 100/full.  we had it hardcoded on the pix7...

matt.walls has created ASA 5510 Interface speed/duplex issue

4 years 11 months ago
We have moved a connection from a Pix515 with "interface ethernet2 100full",...

matt.walls has commented on Firewall Extended Access-List Question???

4 years 12 months ago
That is exactly how it works.  One ACL to each interface.  Only exception is...

matt.walls has created Re: Firewall Extended Access-List Question???

4 years 12 months ago
That is exactly how it works.  One ACL to each interface.  Only exception is...

matt.walls has created Re: could not issue wr mem command

5 years 2 weeks ago
I have seen this before. try to copy the running config to a new *.cfg file on...

matt.walls has commented on could not issue wr mem command

5 years 2 weeks ago
I have seen this before. try to copy the running config to a new *.cfg file on...

matt.walls has created Re: Pix Transparent mode: standby unit

5 years 2 weeks ago
I was told by tac that this is normal behavior of firewall.  it just takes...

matt.walls has commented on Pix Transparent mode: standby unit

5 years 2 weeks ago
I was told by tac that this is normal behavior of firewall.  it just takes...

matt.walls has created Pix Transparent mode: standby unit

5 years 2 weeks ago
I have a failover pair that are running in transparent mode.  the problem that...

matt.walls has commented on WAAS and SNMP access-list

6 years 4 months ago
turns out to be a bug that cisco confirmed (CSCsv89695). works in some cases...

matt.walls has created Re: WAAS and SNMP access-list

6 years 4 months ago
turns out to be a bug that cisco confirmed (CSCsv89695). works in some cases...

matt.walls has created WAAS and SNMP access-list

6 years 4 months ago
I am using 4.1.1c(build b16), and testing restricting access to the SNMP MIBS...

matt.walls has commented on ASK THE EXPERT - CONFIGURING AND TROUBLESHOOTING DMVPN NETWORK

7 years 9 months ago
does DMVPN support IPv6 over IPv4 Tunnels?

matt.walls has created Re: ASK THE EXPERT - CONFIGURING AND TROUBLESHOOTING DMVPN NETWORK

7 years 9 months ago
does DMVPN support IPv6 over IPv4 Tunnels?

matt.walls has created RME: NetConfig, device failed during update, Sync archive failed

8 years 3 months ago
In using NetConfig i am copying running-config to flash:, removing boot...

matt.walls has commented on benefits of rcp/tftp

8 years 3 months ago
So why would one pick RCP over TFTP or vise versa? We are only at RME 3.5 so...

matt.walls has created Re: benefits of rcp/tftp

8 years 3 months ago
So why would one pick RCP over TFTP or vise versa? We are only at RME 3.5 so...

matt.walls has created benefits of rcp/tftp

8 years 3 months ago
could someone provide me with the benefits of using rcp or tftp. I can't seem...

matt.walls has created Re: ios deployment (rme 3.5)

8 years 3 months ago
that does work. but i don't understand why the transport protocol order (check...

matt.walls has commented on ios deployment (rme 3.5)

8 years 3 months ago
that does work. but i don't understand why the transport protocol order (check...

matt.walls has created ios deployment (rme 3.5)

8 years 3 months ago
I am doing some rme 3.5 ios push testing. and have noticed (from sniffer) that...

matt.walls has created pix - mtu path discovery (outside/inside)?

8 years 5 months ago
Could someone point out an advantage/disadvantage of either of these two...

matt.walls has commented on aaa authorization bypass

8 years 6 months ago
I would agree, would be nice to have aaa statement to ignore aaa authorization...

matt.walls has created Re: aaa authorization bypass

8 years 6 months ago
I would agree, would be nice to have aaa statement to ignore aaa authorization...

matt.walls has created aaa authorization bypass

8 years 6 months ago
Is their a command that will bypass the aaa authorization from a particular...

matt.walls has created show privilege level of commands

8 years 6 months ago
can someone tell me what command will list out and show me what the default...

matt.walls has created Re: tacacs+ w/ PIX firewall

8 years 7 months ago
7.1(2)12, fyi, i got it working. didn't realize that the priv-lvl does not...

matt.walls has commented on tacacs+ w/ PIX firewall

8 years 7 months ago
7.1(2)12, fyi, i got it working. didn't realize that the priv-lvl does not...

matt.walls has created tacacs+ w/ PIX firewall

8 years 7 months ago
using tac_plus I have definition for service=shell and priv-lvl 15. can't...

matt.walls has commented on AAA on a PIX 7.2(1)

8 years 8 months ago
You need to enter on the pix the following to perform command level...

matt.walls has created Re: AAA on a PIX 7.2(1)

8 years 8 months ago
You need to enter on the pix the following to perform command level...

matt.walls has commented on VMS manage FWSM with multiple context

8 years 8 months ago
be aware of: CSCsb89594, RME does not work for PIX with multi context feature...

matt.walls has created Re: VMS manage FWSM with multiple context

8 years 8 months ago
be aware of: CSCsb89594, RME does not work for PIX with multi context feature...

matt.walls has created TACACS+ authorization & pix6.3

8 years 8 months ago
I would like to use TACACS+ authorization for allowing some limited allowed...

matt.walls has created TACACS+ authorization with PIX versoin 6.3.x

8 years 8 months ago
I would like to use TACACS+ authorization for allowing some limited allowed...

matt.walls has created RME: netconfig -vs- config editor

8 years 9 months ago
why would i choose to use netconfig over config editor. I am confused, as they...

matt.walls has created Re: no failover ip address on inside interface

8 years 9 months ago
i was thinking about this some more: If you have (PIX Primary: Active, PIX...

matt.walls has commented on no failover ip address on inside interface

8 years 9 months ago
i was thinking about this some more: If you have (PIX Primary: Active, PIX...

matt.walls has created no failover ip address on inside interface

8 years 9 months ago
I have a pix 6.x running failover configuration (active/standby). with one...

matt.walls has commented on ciscoworks and pix (multicontext)

8 years 9 months ago
so how do customers archive configs of pix's in multicontext mode? they are...

matt.walls has created Re: ciscoworks and pix (multicontext)

8 years 9 months ago
so how do customers archive configs of pix's in multicontext mode? they are...

matt.walls has created ciscoworks and pix (multicontext)

8 years 9 months ago
How does ciscoworks backup a multicontext pix configuration? i understand that...

Bio












matt.walls's Stats

Points10
Discussion started 21
Answers marked as Correct 1
Endorsed 0
Content Rated 1