Mehdi Talei

Member Since: Sep 23, 2008

English
Mehdi Talei's Activity on Cisco Support Community
Currently displaying 50 results

Mehdi Talei has commented on RME, failed to export Detailed Device Report to CSV file

2 months 3 weeks ago
This solution worked for me on LMS 4.2.3 You rock Joseph Clarke :-) Thanks...

Mehdi Talei has commented on AP reaches the WLC on 5426 but not 5427

3 months 3 weeks ago
Nothing appears under Monitor -> Statistics -> AP Join  regarding...

Mehdi Talei has created AP reaches the WLC on 5426 but not 5427

3 months 3 weeks ago
I have more than 200 APs same model reaching and associating with my WLC...

Mehdi Talei has commented on VALIDATION_FAILURE.-UPDATE_103

4 months 1 day ago
Has anybody opened a TAC case for this issue? If so, what's TAC answer?...

Mehdi Talei has created Cisco Aironet 1700 not supported in PI 2.1.1

7 months 3 weeks ago
Cisco Aironet 1700 is not supported in PI 2.1.1; any idea if there is an update...

Mehdi Talei has created NAT works for Host destination but not for network statement

8 months 5 days ago
I have a weird situation and try to find an answer for...In my NAT ACL...

Mehdi Talei has commented on Using name in Access list in Cisco "ROUTER"

10 months 3 weeks ago
Thanks Leo and Joseph for tour feedback.I definitely understand your point and...

Mehdi Talei has commented on Using name in Access list in Cisco "ROUTER"

11 months 3 days ago
But technologically speaking, is it possible to have an ACL in a "router...

Mehdi Talei has created Using name in Access list in Cisco "ROUTER"

11 months 4 days ago
I'd like to use the name in ACL instead of IP address in a Cisco Router! Is...

Mehdi Talei has commented on Client unable to get DHCP IP from 871W

1 year 9 months ago
Hello,Adding the line fixes the issue, but why that happens at all! There...

Mehdi Talei has commented on Several Active Directory in ISE

1 year 11 months ago
Thanks for the answer Jatin.

Mehdi Talei has created Several Active Directory in ISE

1 year 11 months ago
I'd like to know if it is possible to have several independent AD servers in...

Mehdi Talei has commented on SNMP Authentication Failure

2 years 1 week ago
well nice try, because it solves your problem! But for me as a technical guy,...

Mehdi Talei has commented on SNMP Authentication Failure

2 years 1 week ago
I replaced SNMPv2 by v3 and it worked! I don't get what the problem was but it'...

Mehdi Talei has commented on SNMP Authentication Failure

2 years 1 week ago
any solution for this problem? I have the same issue.Thanks

Mehdi Talei has commented on Cisco ISE AD (Windows Server 2013) Authentication Problem

2 years 2 weeks ago
Any release date for ISE 1.2 ?

Mehdi Talei has commented on OnPlus End-of-Life

2 years 3 weeks ago
Well I don't mind to use Meraki as far as the product exists!

Mehdi Talei has commented on OnPlus End-of-Life

2 years 3 weeks ago
So what is the replacement product?

Mehdi Talei has commented on Split tunneling for site-to-site VPN

2 years 1 month ago
Does this configuration work if the Internet connection was on ASA1? I mean,...

Mehdi Talei has created ip host backup address

2 years 3 months ago
Hello,I need to understand why there the possibility to have several IP...

Mehdi Talei has commented on VSS Feedback

2 years 5 months ago
Hello mahmoodmkl,What kind of issues did you encounter with distance between...

Mehdi Talei has commented on command to visualize PPS?

2 years 7 months ago
What I am looking for is to find out the actual forwarding rate that the switch...

Mehdi Talei has created command to visualize PPS?

2 years 7 months ago
Hello,Is there a command to visualize the actual PPS in a L3 switch?Thanks

Mehdi Talei has created LMS4.2 ESC RICS0001:Internal Error,unable to process the collected data from the device

2 years 7 months ago
I encountered this problem a few months ago, then placed a call with TAC and...

Mehdi Talei has commented on LMS4.2.1 limit local user access

2 years 7 months ago
Thanks Michel. I should have paid more attention to see those 3 options :-)

Mehdi Talei has commented on Problems with LMS 4.2 and topology services

2 years 7 months ago
I had the same issue. Even though my account was part of administrators group,...

Mehdi Talei has commented on LMS 4.2.1 Report Help

2 years 7 months ago
You can also visualize all your VTP domains in Topology Services, but I am not...

Mehdi Talei has created LMS4.2.1 limit local user access

2 years 7 months ago
Hello,I want to limit a local user's access to some specific groups of devices...

Mehdi Talei has commented on LMS 4.2.1 Report Help

2 years 7 months ago
You can run a "netshow" job with the command show vtp status

Mehdi Talei has commented on Root bridge explanation

2 years 8 months ago
Here is Spanning-tree related config:DMZ#spanning-tree mode pvstspanning-tree...

Mehdi Talei has created Root bridge explanation

2 years 8 months ago
I am just trying to understand what is going on here... In attachment you find...

Mehdi Talei has created configuration via Kron

2 years 10 months ago
Hello,I am wondering if it is possible to configure a router/switch via kron. I...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
Because when the connection of Router2 to the destination C.C.C.C is down,  the...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
Because when the connection of Router2 to the destination C.C.C.C is down,  the...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
Thanks for clarification Sergey.As you mentioned I won't be able to use policy-...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
Thanks for clarification Sergey.As you mentioned I won't be able to use policy-...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
I lost 3 days on something which exist but not supported! Not really brilliant...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
I lost 3 days on something which exist but not supported! Not really brilliant...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
@Kishore, no NAT is used in this scenario! All addresses are real.@Kunal, great...

Mehdi Talei has commented on Match statement in PBR

3 years 1 month ago
@Kishore, no NAT is used in this scenario! All addresses are real.@Kunal, great...

Mehdi Talei has created Match statement in PBR

3 years 1 month ago
I am trying to implement PBR in order to route certain trafic to a specific...

Mehdi Talei has commented on TCL interpreter in Cisco Switches

3 years 1 month ago
Interestingly I have a WS-C2960-24LC-S with c2960-lanlitek9-mz.122-50.SE4.bin...

Mehdi Talei has commented on TCL interpreter in Cisco Switches

3 years 1 month ago
Interestingly I have a WS-C2960-24LC-S with c2960-lanlitek9-mz.122-50.SE4.bin...

Mehdi Talei has commented on TCL interpreter in Cisco Switches

3 years 1 month ago
I have a WS-C2960-24TT-L with the IOS c2960-lanbasek9-mz.122-44.SE6.bin which...

Mehdi Talei has commented on TCL interpreter in Cisco Switches

3 years 1 month ago
I have a WS-C2960-24TT-L with the IOS c2960-lanbasek9-mz.122-44.SE6.bin which...

Mehdi Talei has commented on Copying configuration from a controller to another via WCS

3 years 5 months ago
So basically it "copies" the config instead of replicating! WCS does not do the...

Mehdi Talei has commented on Copying configuration from a controller to another via WCS

3 years 5 months ago
So basically it "copies" the config instead of replicating! WCS does not do the...

Mehdi Talei has commented on Copying configuration from a controller to another via WCS

3 years 5 months ago
Stephane,Thanks for your reply...And could you please explain me the step in...

Mehdi Talei has commented on Copying configuration from a controller to another via WCS

3 years 5 months ago
Stephane,Thanks for your reply...And could you please explain me the step in...

Mehdi Talei has created Copying configuration from a controller to another via WCS

3 years 5 months ago
Hello,I am wondering if it is possible to replicate the configuration of a...

Bio

After being graduated in B.Sc. of Computer Engineering from Melli University, I continued my education in M.Sc. degree of Microelectronics at Paris6 University in 2003. After graduation, I moved to Montreal, Canada and started my career in Network Administration. I obtained my first Cisco certificate, CCNA in 2005.











Mehdi Talei's Stats

Points5
Discussion started 32
Answers marked as Correct 0
Endorsed 0
Content Rated 25