MercatorIneo

Member Since: May 04, 2012

English
MercatorIneo commented on Traffic to specific host through tunnel in WAN, Routing and Switching 1 year ago

Your are right.This line was missing in the ACL of the "ip nat inside source list 102 interface...

MercatorIneo commented on Traffic to specific host through tunnel in WAN, Routing and Switching 1 year ago

There is no ACL for the crypto map in the Central site router.crypto dynamic-map dynmap 20 set...

MercatorIneo commented on Traffic to specific host through tunnel in WAN, Routing and Switching 1 year ago

Thanks for your answer. I've already tried with this line or not, in the branch router :ip route a....

MercatorIneo commented on Communications between remote site using tunnels in WAN, Routing and Switching 1 year ago

Thank you for your answer.There a no "split-horizon" command in the configs. I assume we can...

MercatorIneo commented on SPA504G phone does not upgrade in Voice Systems 1 year ago

Many thanks for this answer. It solves my problem.Sorry for the wrong category.Regards,Guy

MercatorIneo commented on Lan to lan VPN not connecting in WAN, Routing and Switching 1 year ago

I solved this problem by applying this :In router B and C : crypto isakmp identity hostnameIn...

MercatorIneo commented on Lan to lan VPN not connecting in WAN, Routing and Switching 1 year ago

I've understood that creating 2 profiles with the same match criteria makes the configuration...

MercatorIneo commented on Lan to lan VPN not connecting in WAN, Routing and Switching 1 year ago

Thanks for your help.I planed to add these lines in router A crypto keyring tunnel_C  pre-shared-...

MercatorIneo commented on Solve phase 1 issue in VPN betwwen 2 routers in Small Business Support Community 1 year ago

Thank you for your help.Changing the startup-config (new ip of the peer) and restarting solved this...

MercatorIneo commented on IPsec Windows peer : how to? in VPN 3 years ago

Thanks for taking time.So :-IPSec is dead-for SSL VPN, I have to buy licences (ASA or IOS)Ok,...

MercatorIneo commented on 2 smtp server using 2 different public address in WAN, Routing and Switching 4 years ago

Hello,Problem is solved. What I had to do:ip nat pool deuxiemeip y.y.y.98 y.y.y.98 netmask 255.255....

MercatorIneo commented on 2 smtp server using 2 different public address in WAN, Routing and Switching 4 years ago

Thanks for your answer but I don't think it is a problem. I can reach  the port 25 from outside,...

MercatorIneo commented on 2 smtp server using 2 different public address in WAN, Routing and Switching 4 years ago

Thanks for you help. I also tried this, with no luck. With this rule, Smtp packet can come from...

Bio












MercatorIneo's Stats

Points0
Discussion started 7
Answers marked as Correct 0
Endorsed 0
Content Rated 4